Does the Eventuri G20 M340i intake also fit the M440i?

Yes. The Eventuri G20 M340i intake fits both the G20 M340i and the G22 / G23 M440i, since they share the B58 3.0T engine. The one difference is the November 2018 date split, which applies only to the G20 M340i; the M440i is a 2020-and-later car and is not affected by it.

What is the November 2018 date about for the M340i?

BMW revised the intake sensor arrangement on the G20 M340i partway through production, so pre and post November 2018 cars use different intake versions. This SKU is the pre-November 2018 version. Check your build date and compare the sensor layout to the comparison photo before ordering. This split does not apply to the M440i.

What does the Venturi housing do for performance?

The patented Venturi housing creates a controlled, smooth airflow path from the filter to the turbo inlet, unlike an open cone or simple heat shield. This maintains laminar flow and reduces turbulence, which improves turbo efficiency and sharpens throttle response. Combined with the larger carbon intake tube, it opens up the restrictive factory airflow path on the B58.

Does the sealed housing actually keep temperatures down?

Yes. The intake location on these platforms exposes it to significant engine bay heat, so Eventuri designed a fully sealed housing that isolates the filter from hot air while maximizing internal volume to reduce pressure drop and heat soak. Additional cold air feeds use the factory ducting and supplementary openings to keep a consistent supply of ambient air.

Is it a difficult install and does it stay daily-drivable?

The intake is a direct bolt-on using factory mounting locations, so no cutting or permanent modification is required. It replaces the OE airbox and plastic tube with sealed carbon components while retaining full daily drivability. Most competent independent shops can complete the install without special tooling on both the M340i and M440i.

What replacement filter does it use?

The intake uses one filter, the Eventuri EVE-15144-G2-FTR, a Type L Generation 2 high-flow element. It is serviceable and reusable with proper cleaning, so keeping a spare on hand means the car stays on the road while the filter is cleaned and dried between services.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Black Carbon Intake System for G20 BMW M340i and G22 / G23 M440i B58

The Eventuri G20 M340i intake is a fully sealed prepreg carbon fiber induction system for the G20 BMW 3 Series M340i and G22 / G23 4 Series M440i and their B58 3.0T, built to open up a less restrictive airflow path to the turbocharger while holding intake air temperatures low. The factory airbox is designed around packaging and sound suppression, which chokes airflow under higher load; the Eventuri G20 M340i intake replaces it with a sealed carbon assembly and the brand’s patented Venturi housing, creating a controlled, smooth path from the filter to the turbo inlet to keep flow laminar and cut turbulence. A sealed housing isolates the filter from the significant engine bay heat on these platforms while maximizing internal volume to reduce pressure drop and heat soak, and additional cold air feeds use the factory ducting plus supplementary openings. A smooth, larger-diameter carbon tube replaces the restrictive OE plastic tube.

Features

Patented Venturi filter housing creates a smooth, controlled path from filter to turbo inlet
Fully sealed carbon assembly isolates the filter from engine bay heat and reduces heat soak
Maximized internal volume lowers pressure drop under load
Additional cold air feed paths use factory ducting plus supplementary openings
Smooth, larger-diameter carbon fiber intake tube replaces the restrictive OE plastic tube
High-flow Eventuri Generation 2 air filter
Laser-cut mounting brackets for OEM-level fitment
Direct bolt-on installation that retains daily drivability
Lightweight prepreg carbon fiber construction, gloss finish

Specifications

Material: Prepreg carbon fiber
Finish: Gloss carbon fiber
Housing: Patented Eventuri Venturi design
Filter: High-flow Eventuri Generation 2
Intake tube: Smooth, larger-diameter carbon fiber
Installation: Direct bolt-on, factory mounting locations

Applications

BMW M340i: G20 | B58 3.0T | pre-November 2018 build
BMW M440i: G22 / G23 | B58 3.0T

Notes

Check your G20 M340i build date and intake sensor layout against the comparison photo before ordering; if your car is a post-November 2018 build, contact Bulletproof Automotive for the correct version.
The G22 / G23 M440i is a 2020-and-later car and is not affected by the November 2018 date split.
Check local emissions regulations before installation; the manufacturer’s emissions notice applies.
Designed and hand-assembled in the UK. Warranty coverage and damage-in-transit support are fully provided.

Frequently Asked Questions

Does the Eventuri G20 M340i intake also fit the M440i? Yes. The Eventuri G20 M340i intake fits both the G20 M340i and the G22 / G23 M440i, since they share the B58 3.0T engine. The one difference is the November 2018 date split, which applies only to the G20 M340i; the M440i is a 2020-and-later car and is not affected by it.
What is the November 2018 date about for the M340i? BMW revised the intake sensor arrangement on the G20 M340i partway through production, so pre and post November 2018 cars use different intake versions. This version of the Eventuri G20 M340i intake is the pre-November 2018 fitment. Check your build date and compare the sensor layout to the comparison photo before ordering. This split does not apply to the M440i.
What does the Venturi housing do for performance? The patented Venturi housing creates a controlled, smooth airflow path from the filter to the turbo inlet, unlike an open cone or simple heat shield. This maintains laminar flow and reduces turbulence, which improves turbo efficiency and sharpens throttle response. Combined with the larger carbon intake tube, it opens up the restrictive factory airflow path on the B58.
Does the sealed housing actually keep temperatures down? Yes. The intake location on these platforms exposes it to significant engine bay heat, so Eventuri designed a fully sealed housing that isolates the filter from hot air while maximizing internal volume to reduce pressure drop and heat soak. Additional cold air feeds use the factory ducting and supplementary openings to keep a consistent supply of ambient air.
Is it a difficult install and does it stay daily-drivable? The Eventuri G20 M340i intake is a direct bolt-on using factory mounting locations, so no cutting or permanent modification is required. It replaces the OE airbox and plastic tube with sealed carbon components while retaining full daily drivability. Most competent independent shops can complete the install without special tooling on both the M340i and M440i.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with backgrounds in aeronautics and tuning, all sharing a passion for cars and performance. After owning various aftermarket intakes over the years and being disappointed with gains that seldom lived up to their claims, they decided to take things into their own hands and set a new benchmark in intake design and technology. The goal was to engineer systems that provide real, measurable gains and to publish genuine figures to back them up. Their systems are developed using cutting-edge design, testing, and prototyping methods. Each design undergoes CFD analysis and is validated at the prototype stage through volumetric airflow measurement, intake temperature testing, and extensive dynamometer testing. Eventuri publishes all development data to illustrate the full process from concept to finished product. Only the best materials are selected for every component, down to the choice of fasteners, to ensure the quality of the final product is second to none.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri Black Carbon Intake System for G20 BMW M340i and G22 / G23 M440i B58 [EVE-G20B58-V1-INT]

Guaranteed Safe Checkout

Eventuri Black Carbon Intake System for G20 BMW M340i and G22 / G23 M440i B58

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Eventuri

Reviews