Does the Eventuri Carbon Intake System fit my Audi S1?

Yes, if you have the 8X Audi S1 with the 2.0 TFSI engine, built (2014-2018). The Eventuri Carbon Intake System is engineered specifically for that car and replaces the factory airbox using the original mounting points, so no cutting or permanent modification is needed. It is designed for the S1, not the standard A1.

Is this a true cold air intake, or does it pull warm engine-bay air?

It is a true cold air intake. An aluminum scoop mounted behind the front grille feeds ambient air straight into a sealed duct and the enclosed Venturi housing, so the filter draws cool outside air rather than heated under-hood air. At speed the scoop positively feeds the intake, keeping inlet temperatures low and performance consistent.

Do I need a tune, and will I gain power on a stock S1?

No tune is required; the intake works with the factory ECU. On a stock car you get sharper throttle response, lower intake temperatures, and a more aggressive induction sound from the reduced restriction. The clearest power gains come once the car is tuned, when the freer-flowing intake supports the extra airflow a remap asks for.

How difficult is the installation?

It is a direct bolt-on. The system replaces the OEM airbox and rubber intake duct using the factory mounting points, with laser-cut brackets locating everything precisely, so no cutting or drilling is needed. Most owners with basic hand tools and some mechanical experience fit it in about one to two hours.

Can the filter be cleaned, and how often does it need replacing?

The system uses a single Gen 2 dry cone filter. Dry media is cleaned gently rather than oiled, which avoids the MAF-fouling risk of oiled filters, and under normal road use it lasts a long time between services. When a replacement is due, it is available as Eventuri filter EVE-661-G2-FTR (Type B).

Is the Eventuri Carbon Intake System legal to use where I live?

It depends on your location. This intake is not CARB approved, so it is not for sale or use in California or other states that require CARB certification. No determination has been made regarding EPA anti-tampering compliance. Check with your local enforcement officials before installing to confirm it is legal in your area.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Carbon Intake System for 8X Audi S1

Eventuri develops the Audi S1 intake to deliver the most efficient, direct airflow to the turbo. Replacing the OEM air box with Eventuri’s patent-pending Venturi housing maintains highly laminar flow, while a genuine cold-air feed via a front-grille scoop lowers inlet temperatures. The result is a consistently optimized intake system with repeatable, noticeable performance gains.

Carbon Intake Housing

Eventuri’s filter housing integrates a high-flow bespoke filter, aluminum cowl, laser-cut bracket, and a carbon pod that shrouds the reverse-mounted element. The carbon pod tapers smoothly into the intake tube, invoking a Venturi effect that accelerates airflow while preserving laminar conditions functioning like an oversized velocity stack. This geometry, combined with Eventuri’s custom filter media, promotes an even velocity profile at the outlet for superior flow consistency. Further technical details are available on the Technology and Filters pages.

Intake Duct

Eventuri’s duct replaces the factory rubber piece to channel ambient air directly into the filter housing. By shielding against engine-bay heat, it helps maintain lower intake temperatures for more consistent performance.

Intake Scoop

Eventuri completes the intake with an aluminum scoop positioned behind the grille to channel ambient air directly into the duct. When the vehicle is in motion, the scoop positively feeds airflow, displacing engine-bay heat and ensuring the filter housing receives a constant supply of cool air. This forced feed reduces reliance on air drawn from the front, effectively shortening the inlet tract for improved responsiveness.

Features

Patent-pending Venturi carbon housing for laminar, efficient airflow
Reverse-mounted high-flow filter with carbon pod velocity-stack effect
Front-grille aluminum scoop delivers true cold-air feed at speed
Sealed intake duct blocks engine-bay heat to lower IATs
Smooth, large-diameter flow path reduces restriction to the turbo
Shorter inlet tract improves response and peak-boost reach
Consistent, repeatable performance gains, especially when tuned

What’s Included

Prepreg Carbon Fiber Venturi Housing
High Flow generation Air Filter (2)
Aluminum Cowl for smooth airflow entry
Laser Cut Intake Duct
Laser Cut Cold Air
Laser Cut Stainless Steel Brackets

Applications

Audi S1: 8X (2014-2018) [2.0L I4 Turbo]

Notes

This item is not eligible for return

Frequently Asked Questions

Does the Eventuri Carbon Intake System fit my Audi S1?
Yes, if you have the 8X Audi S1 with the 2.0 TFSI engine, built (2014-2018). The Eventuri Carbon Intake System is engineered specifically for that car and replaces the factory airbox using the original mounting points, so no cutting or permanent modification is needed. It is designed for the S1, not the standard A1.
Is this a true cold air intake, or does it pull warm engine-bay air?
It is a true cold air intake. An aluminum scoop mounted behind the front grille feeds ambient air straight into a sealed duct and the enclosed Venturi housing, so the filter draws cool outside air rather than heated under-hood air. At speed the scoop positively feeds the intake, keeping inlet temperatures low and performance consistent.
Do I need a tune, and will I gain power on a stock S1?
No tune is required; the intake works with the factory ECU. On a stock car you get sharper throttle response, lower intake temperatures, and a more aggressive induction sound from the reduced restriction. The clearest power gains come once the car is tuned, when the freer-flowing intake supports the extra airflow a remap asks for.
How difficult is the installation?
It is a direct bolt-on. The system replaces the OEM airbox and rubber intake duct using the factory mounting points, with laser-cut brackets locating everything precisely, so no cutting or drilling is needed. Most owners with basic hand tools and some mechanical experience fit it in about one to two hours.
Can the filter be cleaned, and how often does it need replacing?
The system uses a single Gen 2 dry cone filter. Dry media is cleaned gently rather than oiled, which avoids the MAF-fouling risk of oiled filters, and under normal road use it lasts a long time between services. When a replacement is due, it is available as Eventuri filter EVE-661-G2-FTR (Type B).
Is the Eventuri Carbon Intake System legal to use where I live?
It depends on your location. This intake is not CARB approved, so it is not for sale or use in California or other states that require CARB certification. No determination has been made regarding EPA anti-tampering compliance. Check with your local enforcement officials before installing to confirm it is legal in your area.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and tuning – all sharing a passion for cars and performance. After owning various intakes over many years for their own cars and being disappointed with the gains which seldom lived up to their claims – they decided to take things into our own hands and rewrite the book. To set a new benchmark in intake design and technology, above all – to engineer systems which provide real gains and then to publish genuine figures. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dynamometer testing. They strive to publish all the development information to illustrate the depths they go to in bringing an intake from concept to reality. Only the best materials are selected for each component – even down to the choice of fasteners and fixings in order to ensure that the quality of the end product is second to none. After many years of disappointment with the usual aftermarket intakes, they are proud to be raising the bar and creating intake systems which are setting a new standard and genuinely improve the performance of your vehicle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri Carbon Intake System for 8X Audi S1 [EVE-S1-CF-INT]

Guaranteed Safe Checkout

Eventuri Carbon Intake System for 8X Audi S1

Carbon Intake Housing

Intake Duct

Intake Scoop

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Eventuri

Reviews