Endless Racing S2 Rear Performance Brake System w/ 2PC Rotors for FD Mazda RX-7

Endless Racing S2 Rear Performance Brake System w/ 2PC Rotors for FD Mazda RX-7

The Endless Racing S2 Rear Performance Brake System provides excellent stopping power to improve overall vehicle performance. It is an engineered performance braking system designed for track–day performance as well as everyday street use. The high–end technology behind the Endless S2 rear brakes ensures increased pedal feel, better modulation and high–torque braking potential. With features that include a single–piston caliper, steel rotors, high–performance pads, and stainless–steel hoses, the S2 system features a race–proven design that offers consistent braking power in all conditions. The installation process is simple and takes just a few hours, allowing for a quick upgrade to your vehicle‘s braking system. The Endless Racing S2 Rear Performance Brake System is the perfect choice for drivers who want to enhance the performance of their vehicle without breaking the bank. The M4 Endless Front 4Pot Paired perfectly with the 2Pot Endless Caliper Kit which was produced with Computer–Aided Engineering analysis to reduce weight while keeping strength and durability. This design is a shining example of the daring light weighting work performed by Endless, evident especially in the bold lightweight holes. There are settings available for both the front and rear. Endless uses the utmost in quality materials and craftsmanship when designing calipers for any type of racing – rally, street, or otherwise. These calipers will sustain the toughest conditions, ensuring precision and accuracy stay intact. When you pair the calipers with RF650 Racing Super Fluid, you‘ll be sure to reach optimal performance. The caliper will apply and relieve brakes with solid dependability.

Endless manufactures first–rate calipers made from quality materials and constructed with exact precision. Even in the most arduous conditions, these calipers remain unscathed and remain correct. When you complement these calipers with RF650 Racing Super Fluid, you will experience optimal output. Your brakes will be engaged and released with outstanding precision and dependability.

Blue Anodized Finish

• When aluminum is exposed to oxygen, it undergoes a process called oxidation that creates a protective film similar to how rusting occurs. Anodizing, which is a higher level of oxidation, provides a hard outer layer of aluminum oxide for an even sturdier finish. Therefore, many racing cars choose this type of coating over painting or powder coating because it is incredibly durable and can withstand a lot of repeated use.

Curving Slit Brake Rotors

• The Brake Rotor, Curving Slit, manufactured to the highest standards, delivers exceptional braking performance due to Endless‘ specialized temperature treatment and durable Endless Blue heat–resistant finish. On top of that, its affordable cost makes it suitable for a variety of purposes, from replacing old rotors to street to circuit driving.

Cost Effective, and More On So Many Levels

• Steel discs from Endless are often a top choice for drivers and racing teams because they are budget–friendly and provide an array of performance options. What‘s more, racers tend to favor the Endless steel discs based on their experience.

Special Heat Treatment Process

• Prolonged and intensive use of a rotor can lead to surface heating and consequently cause small fractures known as heat cracks. To prevent this, special heat treatment is applied to the components of the rotor in order to standardize them and reduce the number of heat cracks during intense operation. This has increased the longevity of the rotor, making it possible to use for extended periods of time without any worries.

Blue Rotor Hat Finish

• The bell cap has been painted blue to protect it from rusting and to add a decorative element.

About Bedding

• For optimal performance of a pad specifically designed to handle high temperatures, ‘bedding‘ must be performed. This process calls for preheating the pads before any intense use to bring them to the peak working condition.
• Competitors taking part at the top tier of motorsport events such as SUPER GT, WRC and some of the European competitions, demand sleeping accommodations of the best quality.
• Before installing semi–metallic brake pads, it is necessary to give them the proper break–in period in order to ensure maximum heat dissipation and maximize longevity for both the pads and rotors.
• How to Bed:
  • When driving a vehicle equipped with a new product, raise the rotor temperature between 400–500°C, being careful not to Slam on the brakes. Also, when the temperature decreases to 100°C or less, the process is done.

Specifications

• Weight: 1550g
• Size: 137.7mm x 70.8mm x 200mm
• Disc Capacity: 280mm thru 332mm
• Std Color of Kit: Blue anodize
• Std Compound for Kit: SSM/ Type R / MX72 / MX72 Plus
• Compatible Wheel Size: 17″

Kit Contents

• Endless racing calipers (2)
• Brake pad set
• Caliper mounting bracket (2)
• Brake rotors (330mm x 28mm 2PC) (2)
• Brake lines (2)

Applications

• Mazda RX-7: FD (1991-2002)

Notes

• It may be difficult to achieve ideal braking performance when bedding the pads in wet weather. Whenever possible, bedding should be done during dry conditions.
• The compatibility of wheels is determined by the brand and dimensions of the wheel
• The brake rotor is a system kit that comes with the System Inch Up Kit. There are two types, the one-piece and two-piece, depending on the model.
• Alumite in a blue hue is used as the default option for the two-segment type of rotor bell housing. The singular rotor cap is painted blue.

ABOUT ENDLESS

Endless is a leading manufacturer of high-performance brake systems, renowned for its innovative engineering and commitment to safety. Established with a vision to redefine braking technology, Endless has consistently pushed the boundaries of performance and reliability in the automotive industry.