Do the Endless Brake Pads for 8N cars fit the 1.8T TT?

No. Endless lists a different front pad, EIP024, for the rest of the 1998 to 2006 TT range, so the Endless Brake Pads for 8N TT 3.2 cars on this page suit only the VR6 quattro sold from 2004 to 2006. Both use the EIP025 rear shape, but the front sets are not interchangeable.

Are these the same front pads as the 2004 Golf R32?

Yes. The TT 3.2 and the 2004 Golf R32 share the 3.2-liter VR6 and the same front pad shape, and Endless lists this TT under the R32 name. This listing is written and priced for the Audi, so owners of the Volkswagen should check the rear pad with Bulletproof Automotive before ordering.

Which Endless compound suits a TT 3.2 on track?

MX72 Plus is where to begin for a TT 3.2 on street tires, with Endless rating it to 750C, or 1382F, and a consistent pedal release lap after lap. A car run on track most months is better on CC-Rg, rated to 800C, or 1472F, with high bite from cold, though Endless notes it is noisy on the road.

Is there a quiet low dust Endless pad for a daily TT?

Yes. SSM Plus is the one for a TT 3.2 used every day. Endless rates it for low dust, low noise and long life, and braking builds as the pedal is pressed harder rather than biting at first touch. MX72 is the next step for an owner who wants more response while still keeping noise and dust low.

Do the racing compounds need special bedding on a TT 3.2?

Yes. Every Endless racing compound needs the Endless bedding procedure before hard use. At 70 to 80 percent of normal pedal effort, bring the rotors up gradually to 400C, or 752F, then let them cool below 150C, or 302F. On the TT 3.2 this applies to the Racing Group, W003, S330 and the rear-only MA45B.

Endless Brake Pads for 8N Audi TT 3.2 V6 Quattro

Endless’s Brake Pads for 8N Audi TT 3.2 V6 Quattro are for the first-generation TT with the 3.2-liter VR6, sold in the US from 2004 to 2006, the years Endless lists. Endless files the car under R32, the name of the 2004 Volkswagen Golf R32 that shares its VR6 and its front pad shape. That shape, EIP042, also appears in the Endless catalogue for the E38 BMW 750i, while the rear, EIP025, is the one Endless lists across the 1998 to 2006 TT range. For a TT 3.2 that is driven daily, SSM Plus is the choice; MX72 Plus suits one that goes on track.

Features

Endless pad shapes EIP042 front and EIP025 rear for the VR6 quattro
SSM Plus, MX72, MX72 Plus and CC-Rg for road and track-day driving
Racing compounds as the Racing Group of fifteen, W003, S330 and MA45B
MA45B offered for the rear axle only
All other options sold front, rear or as a Front and Rear Set

Choosing a Compound

Most TT 3.2 owners use the car on the road, and SSM Plus suits that with low dust and low noise; Endless does not make SSS in these shapes. MX72 brings extra bite for winding roads, MX72 Plus suits track days on street tires and CC-Rg is for a TT that laps often. The racing compounds are for a prepared car, with MA45B rear only, as Endless does not price it for the EIP042 front. W007 and W008 are left off because Endless designs both for carbon ceramic rotors, and the TT 3.2 runs iron rotors.

Every figure below is Endless’s own. Friction is the compound’s average friction coefficient, so a higher number gives more bite for the same pedal pressure. The rotor range is the band of rotor temperatures Endless designs the compound to work in, so choose by the temperatures your car will see.

Street and street-to-track compounds

SSM Plus (street): non-asbestos; friction 0.33-0.40; rotor range 0-550C (32-1022F). Low dust, low noise and long life. Braking builds with pedal pressure rather than a sharp first bite, for drivers who want clean wheels and a quiet car.
MX72 (street to light track): ceramic carbon metal; friction 0.37-0.47; rotor range 50-700C (122-1292F). Minimal noise and dust, strong friction at low temperatures, reduced rotor wear and a better pedal feel than a typical semi-metallic pad. Endless’s dual-duty compound for a road car that sees the occasional track day.
MX72 Plus (street to circuit): ceramic carbon metal; friction 0.39-0.47; rotor range 50-750C (122-1382F). Holds its braking force to higher temperatures than MX72, with stable control and a consistent pedal release. Endless aims it at cars on street tires that run on track.
CC-Rg (track day, street capable): ceramic carbon metal; friction 0.38-0.45; rotor range 50-800C (122-1472F). High initial bite across a wide temperature range, even when cold, and modulation that works with the factory ABS under hard use. Endless notes it is noisy on the street; it is the step up from MX72 Plus for regular track days.

Racing compounds

Each option below is one choice in the Choose Compound menu. For a group, name your compound in the order notes and Bulletproof Automotive confirms it with your order. Every racing compound needs Endless’s bedding procedure: at 70 to 80 percent of normal pedal effort, bring the rotors gradually to 400C (752F), then let them cool below 150C (302F) before hard use.

Racing Group

ME22: dual braking style; friction 0.33-0.38; rotor range 150-800C (302-1472F). Developed from ME20 with lower friction for control, for light to mid-weight cars or heavier cars on slower circuits. Endless rates it for street and track.
ME20: trail-braking style; rotor range 150-800C (302-1472F). High, stable friction at high temperature with low wear, developed for touring cars and rally. Works front or rear, with stock or racing ABS.
N35S: trail-braking style; rotor range 300-800C (572-1472F). Quick, sharp and responsive, with stable modulation under high temperature and load. Endless’s flagship rally compound, also run in FIA GT, and its suggested starting point for drivers new to Endless racing pads.
N05U: trail-braking style; friction 0.46-0.53; rotor range 300-800C (572-1472F). More bite than N35S, popular in sprint-focused Porsche Cup cars.
N05S: trail-braking style; friction 0.45-0.53; rotor range 300-800C (572-1472F). Immediate high friction with little pedal effort, used in Japanese rally cars without brake boosters and in European and Australian sprint racing.
N30C: friction 0.50-0.60; rotor range 300-800C (572-1472F). High initial bite, gentle on rotors and low wear. A rally compound for cars without a brake booster.
MS20: friction 0.32-0.38; rotor range 150-800C (302-1472F). A low-friction rear pad with a flat torque curve and long life, for club racing cars.
MS25: friction 0.36-0.42; rotor range 150-800C (302-1472F). Warms up gradually even under heavy braking. Endless pairs it with a higher-friction pad to prevent lock-up.
MS35: friction 0.45-0.53; rotor range 300-800C (572-1472F). Mid to high initial bite with good modulation and control, a sprint pad for a wide range of conditions.
ML20A: friction 0.30-0.33; rotor range 300-800C (572-1472F). A rear compound with lower initial bite to prevent rear lock-up, for lightweight GT cars.
ML35A: friction 0.30-0.38; rotor range 300-800C (572-1472F). Slightly lower friction with excellent modulation and wear, for lighter GT cars.
ML40A: friction 0.32-0.47; rotor range 300-800C (572-1472F). Moderate friction that resists lock-up, an endurance compound.
S55G: Endless publishes no figures. It suits lightweight and front-wheel-drive cars, and the rear of front-wheel-drive cars, with high controllability.
PC35: Endless publishes no figures. More bite than N35S with high braking force and a stable pedal; Endless’s base pad for rally raid.
S41S: Endless publishes no figures. Developed for GT cars, including GT3, under high brake loads.

Sold as their own options

W003: trail-braking style; friction 0.40-0.45. Similar in character to N35S with better wear, tough and stable at high temperature with a linear torque curve; run in rally, touring cars, ALMS and PWC. Circuit only: Endless does not recommend it for the street and notes high rotor wear when cold.
S330: trail-braking style; friction 0.60-0.70; rotor range 300-850C (572-1562F). High friction for sprint racing, with good control at high levels and without accelerating rotor wear; run in Super GT, stock cars and GT2 and GT3 sprint racing.
MA45B: standard braking style; rotor range 300-800C (572-1472F). Endless’s endurance compound: low friction but stable for a whole race, with excellent heat resistance and wear. Most Nurburgring and Spa 24 Hours entrants run it. Offered for the rear axle only on this car.

Applications

Audi TT: 8N | 2004-2006 | 3.2L VR6

Notes

Each Front or Rear set of Brake Pads for 8N TT 3.2 cars covers both wheels on one axle
For the TT 3.2 V6 quattro only; the rest of the first-generation TT range takes a different Endless front pad
For the factory calipers. A TT fitted with a big brake kit takes the pads for those calipers instead.

Frequently Asked Questions

Do the Endless Brake Pads for 8N cars fit the 1.8T TT? No. Endless lists a different front pad, EIP024, for the rest of the 1998 to 2006 TT range, so the Endless Brake Pads for 8N TT 3.2 cars on this page suit only the VR6 quattro sold from 2004 to 2006. Both use the EIP025 rear shape, but the front sets are not interchangeable.
Are these the same front pads as the 2004 Golf R32? Yes. The TT 3.2 and the 2004 Golf R32 share the 3.2-liter VR6 and the same front pad shape, and Endless lists this TT under the R32 name. This listing is written and priced for the Audi, so owners of the Volkswagen should check the rear pad with Bulletproof Automotive before ordering.
Which Endless compound suits a TT 3.2 on track? MX72 Plus is where to begin for a TT 3.2 on street tires, with Endless rating it to 750C, or 1382F, and a consistent pedal release lap after lap. A car run on track most months is better on CC-Rg, rated to 800C, or 1472F, with high bite from cold, though Endless notes it is noisy on the road.
Is there a quiet low dust Endless pad for a daily TT? Yes. SSM Plus is the one for a TT 3.2 used every day. Endless rates it for low dust, low noise and long life, and braking builds as the pedal is pressed harder rather than biting at first touch. MX72 is the next step for an owner who wants more response while still keeping noise and dust low.
Do the racing compounds need special bedding on a TT 3.2? Yes. Every Endless racing compound needs the Endless bedding procedure before hard use. At 70 to 80 percent of normal pedal effort, bring the rotors up gradually to 400C, or 752F, then let them cool below 150C, or 302F. On the TT 3.2 this applies to the Racing Group, W003, S330 and the rear-only MA45B.

About Endless

Endless is a Japanese brake manufacturer that designs everything in-house and manufactures domestically in Japan, holding surface accuracy to 1/1000mm under strict quality control. The company developed its own laminated sintered wire-mesh backing plate and ceramic carbon rotors, and it proves its parts in competition, running its own factory motorsport program and supplying winning teams across Japanese and European racing. From pads and slit rotors to forged and monobloc calipers, brake fluid, and lines, Endless builds braking systems trusted on both street and circuit.

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.