Endless 6POT / Racing 4 Front & Rear Performance Brake System with 2PC Rotors for S140 and S160 Lexus GS Series

Endless 6POT / Racing 4 Front & Rear Performance Brake System with 2PC Rotors for S140 and S160 Lexus GS Series

The Endless 6POT / Racing 4 Front & Rear Performance Brake System for Lexus GS Series is the perfect choice for drivers who demand the highest levels of performance and safety out of their braking system. This system features Endless 6POT calipers on the front and Racing 4 calipers on the rear, all designed to deliver maximum braking power, while also providing superior heat dissipation and fade resistance. The system also includes high–performance brake pads and rotors, which provide improved friction and increased stopping power, while reducing dust and noise. This system is the perfect choice for Lexus GS Series drivers who want to take their braking performance to the next level. Forged aluminum two–piece calipers that are light and sturdy create reduced heft and increased sturdiness for reliable, controllable braking. With the help of pistons of distinct diameters, inconsistent pad wear is avoided and superior controllability is attained. The 6POT caliper ensures consistent, dependable braking power even in high performance vehicles, making it ideal for street–spec sports cars outfitted with a high–powered engine.

For all kinds racing—rally, road, or street—Endless only uses the best quality components and engineering to maximize performance. These calipers can handle the harshest conditions without bending or weakening their accuracy. To get the best results, pair the calipers with RF650 Racing Super Fluid. Your brakes will engage and disengage with optimal accuracy and trustworthiness.

Blue Anodized Finish

• When aluminum in its natural state comes into contact with oxygen from the atmosphere, a strong covering forms on its surface and further damage is deterred. This is known as oxidation, and is similar to corrosion. Anodizing takes advantage of this natural process and further enhances it so that an incredibly solid protective coating of aluminum oxide is created. This gives the result of a finish that is much more suitable for tracks. Anodizing produces a uniform surface that is more resistant to scratching than paint or powder coat.

“E-Slit” Double Shaving Effect

• The two components that make the E–Slit Rotor so impressive are the long slit that brings about gentle curves and the E slit that sits above it. Through the double–shading effect that the long slit delicately shapes the pad and the E slit adds extra braking power, the pad is kept in its ideal condition. When the long slit on the rotor side is no longer present and the letter E can be seen, it is an indication that the rotor is in need of replacing.
• It is recommended to change the brake rotor at least every two years, even if it appears to be in good condition, as rust, corrosion, and other effects of aging can weaken it over time.

E-Slit Rotors

• The E–Slit rotor has been designed with the user in mind, featuring a long curved slit paired with four smaller E–Slits to provide a silky smooth shave. The longer slit and the added surface friction of the E–Slits work together to keep the brake pad in top condition. Constructed from an exclusive carbon–blend only available to Endless, this rotor is able to deliver level mu–levels, avoid heat cracks, and ensure your brake pads can perform at their maximum potential. The design of the E–Slit rotor has been optimized for superior shaving performance.

Cost Effective, and More On So Many Levels

• Endless steel discs offer more value for your money, as well as a wider range of performance advantages. This is why many racers and drivers prefer the feel and features that Endless steel discs have to offer.

Special Heat Treatment Process

• When a rotor is used heavily over a long period of time, its surface may expand and contract as a result of heat accumulation, which may cause small cracks (heat cracks). To prevent this, a pre–treatment to reinforce the rotor components was conducted to minimize the risk of heat cracks when driving at high speeds. As a consequence, the expected life of the rotor has extended, allowing for greater peace of mind when using it for an extended period of time.

Blue Rotor Hat Finish

• The bell part has been coated with blue paint in order to reduce the potential of corrosion and provide an aesthetically pleasing finish.

Racing 4

• Combining the Endless Racing 4 with 6POT and 6POT Wagon front caliper systems yields an ideal brake balance. This setup is composed of lightweight, heat–resistant forged aluminum for the main caliper body, making it a reliable choice for circuit racing.

About Bedding

• It is necessary to preform the process of ‘bedding‘ which involves applying heat before rigorous use in order to fully realize the original performance of the circuit–dedicated pads that are designed to be high–temperature resistant.
• Competing in the highest echelon of motorsports, such as SUPER GT, WRC and other European events, is a hallmark of professional racing.
• Prior to utilizing semi–metallic brake pads, the proper “bedding–in“ process must be done in order to ensure optimal high temperature operation and extend the life of the pads and rotors.
• How to Bed:
  • When starting up a new item in a circuit, make sure to warm the rotor up to a temperature between 400–500° C, and avoid any extreme deceleration. Once that is finished, you can then include the atari and let the rotor cool down to a temperature of 100° C or lower, finishing the process.

Applications

• Lexus GS300: JZS147 (1993-1997)
• Lexus GS300: JZS160 (1998-2005)
• Lexus GS400: UZS160 (1998-2005)
• Lexus GS430: UZS161 (1998-2005)

Rotor Specifications

• Material: Steel with special carbon
• Slit Shape: E-slit
• 1-piece design
• Special heat treatment

Specifications

• Weight:
  • Front: 3280g
  • Rear: 2500g
• Size:
  • Front: 156mm x 79mm x 288.5mm
  • Rear: 141mm x 73.2mm x 266mm
• Compatible Rotor Diameter:
  • Front: 320mm – 370mm
  • Rear: 332mm
• Standard Color of Kit: Blue anodize
• Standard Compound for Kit: SSM / Type R / MX72 / MX72-Plus
• Compatible Wheel Size: 17″

Kit Contents

• Endless racing calipers (4)
• Brake pad set (front & rear)
• Caliper mounting brackets (4)
• Large diameter brake rotors (345mm x 32mm 2PC) (4)
• Stainless brake lines (4)

Notes

• When attempting to bed brake pads in wet conditions, it may not be possible to get the best results. For optimal performance of the pads, it is important to carry out the bedding process when the weather is dry.
• The compatibility of wheels, depending on brand and size, determines if they can be used together
• This product features an E-Slit rotor as its default. The exact type of wheels that can be used in conjunction with each other are dependent on the brand and size of the wheels.
• Curving slit rotors are adopted as standard for this product

ABOUT ENDLESS

Endless is a leading manufacturer of high-performance brake systems, renowned for its innovative engineering and commitment to safety. Established with a vision to redefine braking technology, Endless has consistently pushed the boundaries of performance and reliability in the automotive industry.