Endless 6POT Front Performance Brake System for GDB Subaru Impreza WRX STi

Endless 6POT Front Performance Brake System for GDB Subaru Impreza WRX STi

Lightweight and highly rigid forged aluminum 2 piece calipers reduce weight and increase rigidity for predictable, controllable braking performance. By adopting pistons with various diameters, uneven pad wear is prevented and high controllability is demonstrated. The 6POT caliper secures stable braking force even in high power tuned cars, and is the best match for street specification sports cars equipped with a high output engine.

Specifications

• Weight : 3280g
• Size : 156mm x 79mm x 288.5mm
• Compatible Rotor Diameter : φ320mm – φ370mm
• Std Color of Kit : Blue Anodize
• Std Compound for Kit : SSM / Type R / MX72 / MX72-Plus
• Compatible Wheel Size : 17″

For racing, rally or street, Endless only uses the highest quality materials and design to achieve the best performance possible. These calipers will cope in the toughest of conditions without flexing or losing accuracy. Combine the calipers with RF650 Racing Super Fluid for optimum performance. Your pads will be applied and released with great precision and reliability.

Blue Anodized Finish

When raw aluminum reacts with the oxygen in the air, a hard surface film develops on aluminum which prevents further degradation. The process is called oxidation, and you can think of it like rust. The anodizing process leverages this natural phenomenon, and takes it a step further to produce an extremely hard protective layer of aluminum oxide. The result is a finish that is far more appropriate for racetrack use. Anodizing creates a uniform surface that is much more abrasion resistant than paint or powder coat.

About Bedding

Circuit-dedicated pads that emphasize high-temperature characteristics, in order to bring out the original performance, it is indispensable to perform the work called “bedding” in which heat is applied in advance before hard driving to make a hit.

Bedding is always done in the top categories SUPER GT, WRC and various races in Europe.

Before using semi-metal brake pads, proper bedding is required to stabilize high temperature performance and extend the life of the pads and rotors.

How to Bed

• When driving on a circuit when a new product is installed, raise the rotor temperature to about 400 – 500° C while avoiding hard braking, and add atari. After that, if the temperature is lowered to 100° C or less by natural cooling, the process is completed.

Kit Contents

• Endless Racing Calipers (2)
• Brake Pad Set
• Caliper Mounting Bracket (2)
• This Kit Uses OEM Brake Rotors (2) – 326mm x30mm
• Brake Lines (2)

Fitment Details

• Fits Applied E

Notes

• It may not be possible to bring out the original performance of the brake pads when bedding in the rain. Bedding should be done in fine weather as much as possible.
• Compatible wheels vary depending on the wheel brand and size.
• This product uses a carving slit rotor.
• Some 4POT kits use factory brake rotors.