Does the Dinan G80 M3 cold air intake fit the M2 and M4?

Yes. The Dinan G80 M3 cold air intake fits the G80 BMW M3, G82 and G83 M4, and G87 M2, all built on the S58 twin-turbo inline-six. It bolts to the factory mounting points and suits the M3 (2021-present), M4 (2021-present), and M2 (2023-present).

The Dinan G80 M3 cold air intake uses matte carbon fiber tubes for a subtle, factory-plus look, versus a high-gloss weave. The exposed carbon still shows the material, just with a flatter, less reflective finish under the hood.

Is it a sealed intake?

Yes. The system uses dual sealed airboxes that isolate the high-flow filters from hot underhood air, keeping intake temperatures down. Cooler, denser air helps the S58's twin turbos respond more consistently under load.

No tune is required to install the Dinan G80 M3 cold air intake, and it improves airflow on its own. The largest, most repeatable gains come when the intake is paired with engine tuning that lets the S58 use the added flow.

Is installation difficult?

No. The intake is a bolt-on installation using factory mounting points with no cutting required. The kit includes the matte carbon fiber tubes, sealed airboxes, and high-flow filters needed to complete the swap on the G8X M2, M3, or M4.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Dinan Matte Carbon Fiber Cold Air Intake for G80 BMW M3, G82 / G83 M4, and G87 M2

Dinan G8X M3 intake is a matte carbon fiber, sealed dual-airbox induction system for the G80 BMW M3, G82 and G83 M4, and G87 M2, all running the S58 twin-turbo inline-six. Dinan feeds cooler outside air through optimized carbon fiber tubes into larger sealed airboxes with larger high-flow filters, cutting restriction and shielding the filters from underhood heat. The airboxes are 26% larger than stock and the tubes and plenum 50% larger, flowing 12.4% more than the factory intake, for sharper throttle and turbo response with a subtle matte carbon weave under the hood.

Features

Larger volume airboxes (26% larger than stock) and tubes/plenum (50% larger than stock) to utilize an increased volume of air
12.4% more flow than stock (stock: 815 CFM, Dinan: 916 CFM at 28″ H2O)
11% increase in filter area (stock: 65 in², Dinan: 72 in² per side) for optimum flow
Reduced intake restriction for greater turbo efficiency and power potential on modified builds
Available in 2×2 gloss or matte twill carbon (matte twill shown)
Dual sealed airboxes to isolate the filters from underhood heat
More robust, aggressive induction soundtrack and improved throttle response
Bolt-on installation

Specifications

Material: matte carbon fiber intake tubes
Engine: 3.0L Twin-Turbo I6 S58
Airboxes: dual, sealed, 26% larger volume
Tubes/plenum: 50% larger than stock
Filters: dual high-flow, washable and reusable; 11% more area per side
Flow: 916 CFM (12.4% more than stock)
Intake style: sealed

Applications

BMW M2: G87 | 2023-present | 3.0L Twin-Turbo I6 S58
BMW M3: G80 | 2021-present | 3.0L Twin-Turbo I6 S58
BMW M4: G82, G83 | 2021-present | 3.0L Twin-Turbo I6 S58

Notes

Available in 2×2 gloss or matte twill carbon; this listing is the matte twill finish
Not CARB approved; not for sale or use in California or other states requiring CARB certification

Frequently Asked Questions

Does the Dinan G8X M3 intake fit the M2 and M4? Yes. The Dinan G8X M3 intake fits the G80 BMW M3, G82 and G83 M4, and G87 M2, all built on the S58 twin-turbo inline-six. It bolts to the factory mounting points and suits the M3 (2021-present), M4 (2021-present), and M2 (2023-present), including the Competition and CS variants.
What finish does the Dinan G8X M3 intake use? This listing is the matte twill carbon fiber finish, for a subtle, factory-plus look versus a high-gloss weave. Dinan also offers the intake in 2×2 gloss twill carbon; both use the same sealed dual-airbox design, and the exposed carbon shows the material with a flatter, less reflective surface in matte.
Is the Dinan G8X M3 intake a sealed intake? Yes. The system uses dual sealed airboxes that isolate the high-flow filters from hot underhood air, keeping intake temperatures down. Cooler, denser air helps the S58’s twin turbos respond more consistently under load, and the 26% larger boxes and 50% larger tubes flow 12.4% more than stock.
Do I need a tune for the Dinan G8X M3 intake? No tune is required to install the Dinan G8X M3 intake, and it improves airflow on its own. The largest, most repeatable gains come when the intake is paired with engine tuning that lets the S58 use the added flow, and the reduced restriction gives greater power potential on modified builds.
Is the Dinan G8X M3 intake difficult to install? No. The intake is a bolt-on installation using the factory mounting points with no cutting required. The kit includes the matte carbon fiber tubes, sealed airboxes, and high-flow filters needed to complete the swap on the G8X M2, M3, or M4.

About Dinan

Founded in 1979, Dinan is North America’s leading BMW tuner, developing, manufacturing, and marketing a full line of high-performance products for BMW, MINI, and Mercedes-Benz. Dinan works through a nationwide network of Authorized Dinan Performance Centers, including select BMW dealerships and independent BMW service and performance shops. The company’s warranty program, introduced in 1996 with BMW of North America’s cooperation, matches BMW’s new car warranty and covers Dinan enhancements and the vehicle itself for up to 4 years or 50,000 miles. That coverage lets BMW owners add real performance without risking their factory warranty. Automotive publications have tested Dinan-enhanced BMWs against some of the world’s most exotic sports cars for three decades, and the results consistently hold up. Despite that performance, Dinan BMWs keep the reliability and everyday civility BMW owners expect. The product line spans engine, driveline, and chassis components across the full BMW lineup, covering acceleration, cornering, and stopping power. Every Authorized Dinan Performance Center can help build anything from a single upgrade to a complete Dinan BMW.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Dinan Matte Carbon Fiber Cold Air Intake for G80 BMW M3, G82 / G83 M4, and G87 M2 [D760-0063-B]

Guaranteed Safe Checkout

Dinan Matte Carbon Fiber Cold Air Intake for G80 BMW M3, G82 / G83 M4, and G87 M2

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Dinan

Reviews