Which models does the Dinan X5 M cold air intake fit?

The Dinan X5 M cold air intake fits the F95 BMW X5 M and F96 X6 M (2020-2025), the G09 XM (2023-2025), and the G05 X5 M60i, G06 X6 M60i, and G07 X7 M60i (2023-2025), all with the 4.4L twin-turbo V8.

Does it fit both the S63 and S68 engines?

Yes. The Dinan X5 M cold air intake covers the S63-powered X5 M and X6 M and the S68-powered XM and X5, X6, and X7 M60i. Both are 4.4L twin-turbo V8s sharing the intake architecture this kit is built around.

The intake uses gloss UV-coated carbon fiber that runs from the front of the engine compartment to the rear, giving a finished look and a smooth, low-restriction path. The high-flow filters are washable and reusable for long-term use.

Will it improve response?

Yes. By cutting intake restriction and feeding cooler air to the twin-turbo V8, the Dinan X5 M cold air intake sharpens throttle and turbo response and adds a more purposeful intake note, while retaining everyday drivability.

Is installation difficult?

No. The intake is a bolt-on installation using factory mounting points, with no cutting required. The kit includes the carbon fiber intake and high-flow filters needed to complete the swap on the X5 M, X6 M, XM, or M60i models.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Dinan Carbon Fiber Cold Air Intake for F95 / F96 BMW X5 M / X6 M, G09 XM, and G05 / G06 / G07 X5 / X6 / X7 M60i

Dinan F95 X5M intake is a gloss carbon fiber induction system for the F95 BMW X5 M and F96 X6 M, the G09 XM, and the G05, G06, and G07 X5, X6, and X7 M60i, all running the 4.4L twin-turbo V8. Gloss UV-coated carbon fiber runs from the front of the engine compartment to the rear, feeding larger sealed airboxes and larger high-flow filters through a low-restriction path that shields the intake from underhood heat. A center inlet scoop adds 86% more inlet cross-section as a secondary air source and doubles as a carbon fiber engine cover, feeding cooler, freer-flowing air to both turbochargers with a more purposeful intake note.

Features

Larger volume airboxes (56% larger than stock) that fully seal to draw on an increased volume of air
86% increase in inlet cross-sectional area via the center inlet scoop (secondary inlet) for maximum airflow
10% more flow than stock (stock: 575 CFM, Dinan: 630 CFM at 30″ H2O per bank)
46% increase in filter area (stock: 51 in², Dinan: 82 in² per side) for optimum flow
Center inlet scoop doubles as a carbon fiber engine cover
Increased turbo efficiency, reliability, and headroom
Increased intake sound at full load
Gloss UV-coated carbon fiber from front to rear
Improved throttle response and bolt-on installation

Applications

BMW X5 M: F95 | 2020-2025 | 4.4L Twin-Turbo V8 S63
BMW X6 M: F96 | 2020-2025 | 4.4L Twin-Turbo V8 S63
BMW XM: G09 | 2023-2025 | 4.4L Twin-Turbo V8 S68
BMW X5 M60i: G05 | 2024-2025 | 4.4L Twin-Turbo V8 S68
BMW X6 M60i: G06 | 2024-2025 | 4.4L Twin-Turbo V8 S68
BMW X7 M60i: G07 | 2023-2025 | 4.4L Twin-Turbo V8 S68

Notes

Fits both S63 (X5 M / X6 M) and S68 (XM / M60i) 4.4TT V8s
Not CARB approved; not for sale or use in California or other states requiring CARB certification

Frequently Asked Questions

Which models does the Dinan F95 X5M intake fit? The Dinan F95 X5M intake fits the F95 BMW X5 M and F96 X6 M from 2020 through 2025, the G09 XM from 2023 through 2025, and the G05 X5 M60i, G06 X6 M60i, and G07 X7 M60i from 2023 through 2025, all with the 4.4L twin-turbo V8. It bolts to the factory mounting points on each of these vehicles.
Does the Dinan F95 X5M intake fit both the S63 and S68 engines? Yes. It covers the S63-powered X5 M and X6 M and the S68-powered XM and X5, X6, and X7 M60i. Both are 4.4L twin-turbo V8s that share the intake architecture this kit is built around, so the one kit suits all the listed vehicles.
What is the Dinan F95 X5M intake made of, and does the scoop do anything? The intake uses gloss UV-coated carbon fiber that runs from the front of the engine compartment to the rear. A center inlet scoop adds 86% more inlet cross-section as a secondary air source and doubles as a carbon fiber engine cover, so it improves flow while finishing the engine bay. The high-flow filters are washable and reusable.
How much more air does the Dinan F95 X5M intake flow? The Dinan F95 X5M intake flows 10% more than the factory intake (630 CFM versus 575 CFM at 30 inches of water per bank), with dual sealed airboxes 56% larger than stock and 46% more filter area per side. That supports greater turbo efficiency and headroom on the twin-turbo V8.
Is the Dinan F95 X5M intake difficult to install? No. The intake is a bolt-on installation using the factory mounting points, with no cutting required. The kit includes the carbon fiber intake and high-flow filters needed to complete the swap on the X5 M, X6 M, XM, or M60i vehicles.

About Dinan

Founded in 1979, Dinan is North America’s leading BMW tuner, developing, manufacturing, and marketing a full line of high-performance products for BMW, MINI, and Mercedes-Benz. Dinan works through a nationwide network of Authorized Dinan Performance Centers, including select BMW dealerships and independent BMW service and performance shops. The company’s warranty program, introduced in 1996 with BMW of North America’s cooperation, matches BMW’s new car warranty and covers Dinan enhancements and the vehicle itself for up to 4 years or 50,000 miles. That coverage lets BMW owners add real performance without risking their factory warranty. Automotive publications have tested Dinan-enhanced BMWs against some of the world’s most exotic sports cars for three decades, and the results consistently hold up. Despite that performance, Dinan BMWs keep the reliability and everyday civility BMW owners expect. The product line spans engine, driveline, and chassis components across the full BMW lineup, covering acceleration, cornering, and stopping power. Every Authorized Dinan Performance Center can help build anything from a single upgrade to a complete Dinan BMW.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Dinan Carbon Fiber Cold Air Intake for F95 / F96 BMW X5 M / X6 M, G09 XM, and G05 / G06 / G07 X5 / X6 / X7 M60i [D760-0056]

Guaranteed Safe Checkout

Dinan Carbon Fiber Cold Air Intake for F95 / F96 BMW X5 M / X6 M, G09 XM, and G05 / G06 / G07 X5 / X6 / X7 M60i

Features

Applications

Notes

Frequently Asked Questions

About Dinan

Reviews