What does the Dinan F80 M3 High Flow X-Pipe fit?

The Dinan F80 M3 High Flow X-Pipe fits the F80 BMW M3 and F82 M4 (2015-2020) with the S55 twin-turbo inline-six. It is a direct bolt-on to the factory mounting points for the section it replaces.

The Dinan F80 M3 High Flow X-Pipe uses mandrel-bent 2.75 in tubing to cut restriction versus the factory section, improving exhaust flow and letting more sound through. On turbocharged engines this can reduce backpressure for a small power gain.

The Dinan F80 M3 High Flow X-Pipe is made from 100% T304 stainless steel and TIG-welded, so it resists corrosion and holds up to exhaust heat. Mandrel bends keep the tubing's full diameter through each curve for smoother flow.

Do I need other parts?

The Dinan F80 M3 High Flow X-Pipe replaces the mid-section of the exhaust and pairs with a Dinan axle-back or the factory rear section. Confirm your existing exhaust setup so the connections match before installing.

Is installation difficult?

No. The Dinan F80 M3 High Flow X-Pipe is a bolt-on installation using the factory mounting points, with no cutting or welding required. Mounting hardware is included to complete the swap.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Dinan High Flow X-Pipe 2.75in for F80 BMW M3 and F82 M4

Dinan F80 M3 X-pipe is a T304 stainless steel high-flow X-pipe for the F80 BMW M3 and F82 M4 and their S55 twin-turbo inline-six. It replaces the restrictive factory section with mandrel-bent 2.75″ tubing to improve exhaust flow and free up sound, deleting both resonators between the catalyst and rear muffler, and it is TIG-welded from 100% 304 stainless for a clean, durable finish. The mandrel-bent crossover evens exhaust pulses between both banks for a smoother, fuller tone, and it bolts on directly using the factory mounting points with included hardware.

Features

Mandrel-bent X-pipe crossover for minimum restriction, unlike stamped X-pipes
Stock hydro-formed 65mm tubing is replaced by 2.75″ (70mm) mandrel-bent tubing for free flow
Deletes both resonators between the catalyst and rear muffler
100% T304 stainless steel construction
TIG-welded for a clean, durable finish
Includes mounting hardware
Bolt-on installation

Notes

Mandrel-bent crossover, not stamped. Deletes both factory resonators. Direct bolt-on to factory mounting points; hardware included.

Applications

BMW M3: F80 | 2015-2018 | 3.0L Twin-Turbo I6 S55
BMW M4: F82 | 2015-2020 | 3.0L Twin-Turbo I6 S55

Frequently Asked Questions

What does the Dinan F80 M3 X-pipe fit? The Dinan F80 M3 X-pipe fits the F80 BMW M3 from 2015 through 2018 and the F82 M4 from 2015 through 2020, both with the S55 twin-turbo inline-six. It is a direct bolt-on to the factory mounting points for the section it replaces, and it fits the F82 coupe and F83 convertible M4 as well as the F80 M3 sedan. Confirm your chassis if you have the F83 convertible before ordering.
How does the Dinan F80 M3 X-pipe help? The X-pipe replaces the stock hydro-formed 65mm tubing with mandrel-bent 2.75″ (70mm) tubing and deletes both factory resonators, cutting restriction and letting more sound through. The mandrel-bent crossover evens the exhaust pulses between both banks for a smoother, fuller S55 tone, and on the twin-turbo six it reduces backpressure for a small power gain.
What is the Dinan F80 M3 X-pipe made of? The Dinan F80 M3 X-pipe is made from 100% T304 stainless steel and is TIG-welded, so it resists corrosion and holds up to exhaust heat. The crossover is mandrel-bent rather than stamped, keeping the tubing’s full 2.75″ diameter through each curve for smoother flow than the stock hydro-formed piping.
Do I need other parts with the Dinan F80 M3 X-pipe? The Dinan F80 M3 X-pipe replaces the mid-section of the exhaust and pairs with a Dinan axle-back or the factory rear section. Confirm your existing exhaust setup so the connections match before installing; the X-pipe is designed to integrate with the factory rear or a compatible aftermarket rear section.
Is the Dinan F80 M3 X-pipe difficult to install? No. The Dinan F80 M3 X-pipe is a bolt-on installation using the factory mounting points, with no cutting or welding required. Mounting hardware is included to complete the swap, though professional installation is recommended for the best fit and alignment.

About Dinan

Founded in 1979, Dinan is North America’s leading BMW tuner, developing, manufacturing, and marketing a full line of high-performance products for BMW, MINI, and Mercedes-Benz. Dinan works through a nationwide network of Authorized Dinan Performance Centers, including select BMW dealerships and independent BMW service and performance shops. The company’s warranty program, introduced in 1996 with BMW of North America’s cooperation, matches BMW’s new car warranty and covers Dinan enhancements and the vehicle itself for up to 4 years or 50,000 miles. That coverage lets BMW owners add real performance without risking their factory warranty. Automotive publications have tested Dinan-enhanced BMWs against some of the world’s most exotic sports cars for three decades, and the results consistently hold up. Despite that performance, Dinan BMWs keep the reliability and everyday civility BMW owners expect. The product line spans engine, driveline, and chassis components across the full BMW lineup, covering acceleration, cornering, and stopping power. Every Authorized Dinan Performance Center can help build anything from a single upgrade to a complete Dinan BMW.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.