What comes in the Front Mount Intercooler and Intake package?

The Front Mount Intercooler and Intake package contains the Accessport V3 for the F-150 Raptor and Limited, the COBB Intake System w/ HCT with dual 3 inch aluminum tubes, the black front mount intercooler with a 24 x 14 x 3.5 inch core, and a COBB vehicle badge.

Is this package CARB legal?

Yes. COBB lists California Air Resources Board Executive Orders D-660-217 and D-660-245 for this package, so it may be sold and used on emissions controlled vehicles in all 50 states when installed according to the COBB application guide. That covers California street use.

Does the intercooler require trimming?

Yes. COBB notes minor trimming on the back side of the grille during installation. The factory Adaptive Cruise Control bracket is maintained when the stock bumper stays on the truck. Owners who prefer no trimming can choose the Stage 2 package with the factory location intercooler, which mates to the OEM shutter shroud.

How is this different from the no intake version?

This full package adds the COBB Intake System w/ HCT, which replaces the factory piping from the airbox with dual 3 inch mandrel bent aluminum tubes and silicone couplers. The Accessport V3, black front mount intercooler and badge are the same. The no intake version suits owners who plan to keep the factory intake.

Does it fit a 2021 or newer Raptor?

No. COBB confirms this package for USDM 2017 through 2020 F-150 Raptor trucks and USDM 2019 through 2020 F-150 Limited trucks, all P552 generation with the 3.5L EcoBoost. The P702 Raptor from 2021 onward uses a different Accessport and is outside the confirmed applications.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

COBB Tuning Stage 2 Power Package Black with Front Mount Intercooler and Intake for P552 Ford F-150 Raptor and Limited

COBB Tuning’s Front Mount Intercooler and Intake package is the full Stage 2 hardware set for the 2017-2020 Raptor and 2019-2020 F-150 Limited: the Accessport V3, the 7F2125 Intake System w/ HCT and the black 7F2500-BK front mount intercooler with its 24 x 14 x 3.5 inch core. It is covered by CARB EO D-660-217 and D-660-245, so a California owner can run it on the street. It makes the most sense for a stock truck; an owner who already has one of these parts will spend less buying the others separately.

Intake System

The intake replaces the factory piping from the airbox with dual 3 inch mandrel bent aluminum tubes, and custom silicone couplers give it an OEM-like fit. COBB designed it specifically for the second generation Raptor.

Front Mount Intercooler

In the Front Mount Intercooler and Intake package the intercooler core measures 24 inches wide, 14 inches tall and 3.5 inches thick, a large volume increase over stock with minimal pressure drop. Minor trimming on the back side of the grille is needed, and the factory Adaptive Cruise Control bracket stays when the stock bumper is used.

Features

Dual 3 inch mandrel bent aluminum intake tubes
Black front mount intercooler with a 24 x 14 x 3.5 in core
Accessport V3 datalogging of up to 10 hours
Uninstall option returns the ECU to its original calibration

What’s Included

Accessport V3 (AP3-FOR-005)
Intake System w/ HCT (7F2125)
Front Mount Intercooler, Black (7F2500-BK)
COBB Vehicle Badge (800200)

Applications

Ford F-150 Limited: P552 | 2019-2020 | 3.5L EcoBoost | USDM
Ford F-150 Raptor: P552 | 2017-2020 | 3.5L EcoBoost | USDM

Notes

50-state legal with CARB EO D-660-217 and D-660-245 when installed per the COBB application guide
Installation requires minor trimming on the back side of the grille
Transmission tuning is not included with this Accessport
Flex fuel hardware is not included; COBB offers CAN Flex Fuel versions of this package
Fits USDM 2017-2020 F-150 Raptor and 2019-2020 F-150 Limited trucks only

Frequently Asked Questions

What comes in the Front Mount Intercooler and Intake package? The Front Mount Intercooler and Intake package contains the Accessport V3 for the F-150 Raptor and Limited, the COBB Intake System w/ HCT with dual 3 inch aluminum tubes, the black front mount intercooler with a 24 x 14 x 3.5 inch core, and a COBB vehicle badge.
Is this package CARB legal? Yes. COBB lists California Air Resources Board Executive Orders D-660-217 and D-660-245 for this package, so it may be sold and used on emissions controlled vehicles in all 50 states when installed according to the COBB application guide. That covers California street use.
Does the intercooler require trimming? Yes. COBB notes minor trimming on the back side of the grille during installation. The factory Adaptive Cruise Control bracket is maintained when the stock bumper stays on the truck. Owners who prefer no trimming can choose the Stage 2 package with the factory location intercooler, which mates to the OEM shutter shroud.
How is this different from the no intake version? This full package adds the COBB Intake System w/ HCT, which replaces the factory piping from the airbox with dual 3 inch mandrel bent aluminum tubes and silicone couplers. The Accessport V3, black front mount intercooler and badge are the same. The no intake version suits owners who plan to keep the factory intake.
Does it fit a 2021 or newer Raptor? No. COBB confirms this package for USDM 2017 through 2020 F-150 Raptor trucks and USDM 2019 through 2020 F-150 Limited trucks, all P552 generation with the 3.5L EcoBoost. The P702 Raptor from 2021 onward uses a different Accessport and is outside the confirmed applications.

About COBB Tuning

COBB Tuning was founded by Trey Cobb in 1999 in Rockwall, Texas, as a Subaru performance shop in the back of his father’s tire shop, and is now headquartered in Austin, Texas. In 2004 COBB introduced the Accessport, a handheld ECU tuning device that flashes COBB’s off-the-shelf maps or a custom tune and doubles as a real-time gauge and datalogger. The range has since grown from Subaru to Ford, Volkswagen, Audi, Porsche, Nissan, Honda, Mazda, Mitsubishi and Toyota platforms, with intakes, intercoolers, exhausts and flex fuel kits engineered alongside the tuning, and many COBB parts carry California Air Resources Board Executive Order numbers for use in all 50 states.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

COBB Tuning Stage 2 Power Package Black with Front Mount Intercooler and Intake for P552 Ford F-150 Raptor and Limited [FOR0050020BK]

Guaranteed Safe Checkout

COBB Tuning Stage 2 Power Package Black with Front Mount Intercooler and Intake for P552 Ford F-150 Raptor and Limited

Intake System

Front Mount Intercooler

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About COBB Tuning

Reviews