Brixton Forged MgCarbon+ Series FDE03 Wheel

The Brixton Forged MgCarbon+ Series was built for a specific kind of owner; one running a supercar or hypercar where material selection at the wheel level has measurable consequences on how the car performs. An AZ80 magnesium face paired with a DYMAG carbon fiber barrel in a 2-piece format brings the construction in approximately 30% lighter than forged aluminum by volume, with that weight reduction showing up in acceleration, handling feel, and overall responsiveness on platforms engineered to be sensitive to those inputs. AZ80 magnesium carries 12% greater specific strength than aluminum alongside high dampening and shock absorption capacity, which keeps the wheel structurally sound and the ride quality composed through the kind of sustained hard use supercars and hypercars are built around.

DYMAG Weight Comparison

• DYMAG’s engineering focus is squarely on what happens when acceleration, braking, and handling are pushed to their limits, and the carbon fiber barrels in the MgCarbon+ Series are built from that starting point. Coming in up to 40% lighter than cast aluminum and 20% lighter than forged aluminum, the weight advantage translates into how the car feels and responds under hard driving rather than just sitting on a spec sheet. Every DYMAG barrel is put through testing that satisfies TÜV, SAE, JWL, and VIA certification requirements, with FEA used to sharpen the structural design in parallel with physical validation rather than as a replacement for it.
  • Cast Aluminum Weight: 15kg (based on 20×9.0) (100%)
  • Forged Aluminum Weight: 12kg (20% reduction) (80%)
  • DYMAG Carbon Fiber Weight: 9kg (40% reduction) (60%)

DYMAG Carbon Fiber Barrel Options

• DYMAG carbon fiber barrels for the MgCarbon+ Series are offered in twill and forged carbon fiber styles, each with multiple finish treatments to suit the build direction. Full carbon fiber barrel configurations are available alongside setups that isolate the carbon to the outer lip, with gloss and satin finishes across select styles.
  • Full gloss twill carbon fiber barrel
  • Full satin twill carbon fiber barrel
  • Gloss forged carbon fiber outer lip only
  • Satin forged carbon fiber outer lip only
  • Full gloss forged carbon fiber barrel
  • Full satin forged carbon fiber barrel

Hardware Options

• MgCarbon+ 2-piece wheels are built with fully exposed titanium assembly hardware exclusively, with titanium replacing the stainless steel found on most other applications. The shift to titanium is a weight decision as much as an aesthetic one, and on a wheel spec’d specifically around mass reduction, that distinction is worth understanding.
  • PVD black
  • Raw

Center-Cap Options

• Brixton Forged’s original center-cap options are available across all standard 5-lug PCD applications, taking care of fitment on the most commonly used platforms without any custom work involved.
  • Satin piano black
  • Classic gloss twill carbon fiber
  • Gloss forged carbon fiber
• Centerlock fitments are covered through dedicated options developed around specific vehicles, and Brixton Forged also produces direct OEM badge replacements for Porsche and Lamborghini centerlock applications.
  • Classic gloss twill carbon fiber
  • Gloss forged carbon fiber

Text & Groove Fill Options

• Brixton’s Text and Groove Fill program gives buyers a way to use color to separate specific design details from the base finish. Epoxy accents can be placed on the Brixton logo, wheel name, series name, and design-specific grooves or spokes, with up to 3 fill locations per wheel depending on the design. Standard colors are Black, Blue, Green, Grey, Orange, Purple, Red, White, and Yellow, with all other colors available on request.

Finishing Options

• The MgCarbon+ Series is finished in Brixton Forged’s standard powder-coat color range, updated annually through collaboration with international partners and global collaborators to keep gloss, matte, satin, and textured options deliberate and consistent from one season to the next.
  • Firecracker black
  • Forged bronze
  • Gloss blue
  • Gloss green
  • Gloss grey
  • Gloss orange
  • Gloss purple
  • Gloss red
  • Gloss yellow
  • Hastings blue
  • Kingsport grey
  • Lunar white
  • ODB
  • Sterling silver
  • Trofeo gold

Features

• MgCarbon+ Series
• 2-piece AZ80 magnesium & DYMAG carbon fiber
• 30% lighter than forged aluminum by volume
• High dampening / Shock absorption for better handling
• Weight reduction back-pad pocketing & water channeling
• 12% stronger than aluminum
• Micro-arc oxidation coating & various powder-coat options

Specifications

• Construction: 2-piece ultra-lightweight magnesium+ / carbon+
• Sizing:
  • 18″:
    • 18×8
    • 18×9.5
    • 18×11
    • 18×13
  • 19″:
    • 19×8
    • 19×9.5
    • 19×10
  • 20″:
    • 20×9
    • 20×9.5
    • 20×10
    • 20×10.5
    • 20×11
    • 20×12
    • 20×12.5
  • 21″:
    • 21×9.5
    • 21×10
    • 21×11
    • 21×12.5
    • 21×13
  • 22″:
    • 22×10.5
    • 22×12.5
• Offsets: Custom
• Hardware: Fully exposed

Other FDE03 Configurations

• AEROTECH SERIES vented modular classic profile
• CARBON+ SERIES 2-piece lightweight carbon+
• FDE SERIES 1-piece lightweight monoblock
• FDE SERIES 2-piece concave duoblock
• FDE SERIES 3-piece floated deep concave
• MAGNESIUM+ SERIES 1-piece lightweight magnesium+ monoblock

Notes

• All Brixton Forged wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” Brixton wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The Bulletproof Team will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.
• Standard PCD center caps are not available in any PCD lower than 100mm, OEM center cap adapters may be required
• If the Text & Groove Fill option is selected, a Bulletproof Automotive Wheel Specialist will reach out to you to go over options. Please note, only up to 3 fill instances are available per wheel; all color options are available.

About Brixton Forged

Brixton Forged™ wheels are entirely conceived and hand-crafted in their manufacturing facility based in Los Angeles, California. With its origins in Los Angeles, their product development team brings decades of experience in creating the highest quality forged wheels in the industry. The team consists of professional Mechanical Engineers and Machinists who spare no effort in the product development process, ensuring no corners are cut. They have a thorough understanding of Vehicle Dynamics, OEM load ratings, and Material Science, equipping them with the necessary skills to engineer wheels that are not only visually stunning but also safe and designed to perform. Brixton Forged has its own team of Mechanical Engineers and technical staff who individually engineer and conduct FEA testing on every wheel set. Their product development team’s wealth of experience enables them to consistently deliver wheels of the highest quality in the industry. Their team of professional Mechanical Engineers ensures no compromises are made throughout the product development process. With a deep understanding of Vehicle Dynamics, OEM load ratings, and Material Science, their team possesses the necessary skills to engineer wheels that are both visually impressive and safe, designed to deliver exceptional performance.