Brixton Forged Carbon+ Series FDE01 Wheel

The Brixton Forged Carbon+ Series was put together for a specific kind of owner; one who understands that on a supercar or hypercar, unsprung weight reduction isn’t a talking point, it’s a measurable variable that affects acceleration, braking, and handling. The construction pairs APP 6061-T6 aerospace-grade forged aluminum faces with DYMAG Boxstrom BX-F carbon fiber barrels and RAU titanium assembly hardware, cutting roughly 25% of the weight compared to an all-aluminum equivalent. What the series delivers on top of that weight reduction is the configurability of a multi-piece wheel, which means fitment and offset options that a one-piece carbon wheel can’t offer. The result has been validated against the demands of both track use and everyday supercar driving.

Weight Comparison

• DYMAG’s focus has always been on where performance hardware actually gets tested; acceleration, braking, and handling at the limit. Their carbon fiber barrels come in up to 40% lighter than cast aluminum and 20% lighter than forged aluminum, which is a meaningful number on a platform where rotating mass has a direct effect on how the car behaves. Every DYMAG wheel goes through testing that meets TÜV, SAE, JWL, and VIA certification requirements, with FEA backing the structural claims rather than replacing physical validation.
  • Cast Aluminum Weight: 15kg (based on 20×9.0) (100%)
  • Forged Aluminum Weight: 12kg (20% reduction) (80%)
  • DYMAG Carbon Fiber Weight: 9kg (40% reduction) (60%)

DYMAG Carbon Fiber Barrel Options

• Brixton Forged DYMAG carbon fiber barrels are available in twill and forged carbon fiber styles, each with multiple finish treatments depending on the final look of the build. Configuration options include full carbon fiber barrel setups or builds that isolate the carbon to the outer lip, with gloss and satin finishes available across select styles.
  • Full gloss twill carbon fiber barrel
  • Full satin twill carbon fiber barrel
  • Gloss forged carbon fiber outer lip only
  • Satin forged carbon fiber outer lip only
  • Full gloss forged carbon fiber barrel
  • Full satin forged carbon fiber barrel

Hardware Options

• Carbon+ 2-piece wheels are built exclusively with fully exposed hardware, which means titanium assembly hardware throughout in place of the stainless steel used on most other applications. That’s not just an aesthetic choice; titanium brings a weight advantage that stainless doesn’t, which matters on a wheel spec’d specifically for performance.
  • PVD black
  • Raw

Center-Cap Options

• Brixton Forged’s original center-cap options cover all standard 5 and 6-lug PCD applications, keeping fitment on the most common platforms straightforward without any custom work required.
  • Satin piano black
  • Classic gloss twill carbon fiber
  • Gloss forged carbon fiber
• Centerlock fitments are handled through dedicated options developed for specific vehicles, and Brixton Forged also offers direct OEM badge replacements for Porsche and Lamborghini centerlock applications.
  • Classic gloss twill carbon fiber
  • Gloss forged carbon fiber

Text & Groove Fill Options

• The Text and Groove Fill program lets buyers add epoxy color accents to specific design details rather than leaving everything to the base finish. Placement options include the Brixton logo, wheel name, series name, and design-specific grooves or spokes, with up to 3 fill instances per wheel depending on the design. Standard colors include Black, Blue, Green, Grey, Orange, Purple, Red, White, and Yellow, with all other colors available on request.

Finishing Options

• Brixton Forged carries over 6,000 powder-coat and Cerakote finish options across their forged wheel lineup, covering solid opaque, textured, and transparent clear categories to address the practical range of what most builds require.
  • Standard Colors: Solid opaques, textures, metallics
    • Solid finishes are selected annually through collaboration with international partners, with the seasonal direction developed to keep gloss, matte, satin, and textured options cohesive and considered rather than arbitrary.
      • Firecracker black
      • Forged bronze
      • Hastings blue
      • Kingsport grey
      • Lunar white
      • ODB
      • Sterling silver
      • Trofeo gold
  • Premium Colors: Transparent clear hues over brushed or polished aluminum
    • Premium transparent finishes are built over ceramic-polished aluminum with multiple layers of transparent high-grade powder coat applied to develop surface depth and clarity. Brushed finishes open with 120-grit hand-brushed aluminum before a transparent coat seals the grain and preserves the hand-finished character of the surface. Available options across both finish paths include Polished Mirror Gloss, Polished Anodized Satin, Brushed Gloss, and Brushed Satin.
      • Carbon bronze
      • Carbon red
      • Classic bronze
      • Double tint
      • Olympic bronze
      • Oxford gold
      • Raw aluminum
      • Single tint
      • Smoke black
      • Triple tint

Specifications

• Construction: Lightweight 2-piece Carbon+
• Features: Weight reduction back-pad pocketing & water channeling
• Sizing:
  • 18″:
    • 18×8
    • 18×9.5
    • 18×11
    • 18×13
  • 19″:
    • 19×8
    • 19×9.5
    • 19×10
  • 20″:
    • 20×9
    • 20×9.5
    • 20×10
    • 20×10.5
    • 20×11
    • 20×12
    • 20×12.5
  • 21″:
    • 21×9.5
    • 21×10
    • 21×11
    • 21×12.5
    • 21×13
  • 22″:
    • 22×10.5
    • 22×12.5
  • 23″:
    • 23×10.5
    • 23×12
• Offsets: Custom
• Hardware: Fully exposed

Other FDE01 Configurations

• AEROTECH SERIES 5-piece vented modular
• FDE SERIES 1-piece lightweight monoblock
• FDE SERIES 2-piece concave duoblock
• FDE SERIES 3-piece floated deep concave
• MAGNESIUM+ SERIES 1-piece lightweight magnesium monoblock
• MGCARBON+ SERIES 2-piece lightweight magnesium carbon+

Notes

• All Brixton Forged wheels are individually crafted from the finest materials to your individual spec. There are no “off the shelf” Brixton wheels and as such, a lead time of a few weeks is to be expected once your spec has been finalized. The Bulletproof Team will serve as your concierge throughout the entire process to ensure you get the perfect wheel for your application.
• Standard PCD center caps are not available in any PCD lower than 100mm, OEM center cap adapters may be required
• If the Text & Groove Fill option is selected, a Bulletproof Automotive Wheel Specialist will reach out to you to go over options. Please note, only up to 3 fill instances are available per wheel; all color options are available.

About Brixton Forged

Brixton Forged wheels are entirely conceived and hand-crafted in their manufacturing facility based in Los Angeles, California. With its origins in Los Angeles, their product development team brings decades of experience in creating the highest quality forged wheels in the industry. The team consists of professional Mechanical Engineers and Machinists who spare no effort in the product development process, ensuring no corners are cut. They have a thorough understanding of Vehicle Dynamics, OEM load ratings, and Material Science, equipping them with the necessary skills to engineer wheels that are not only visually stunning but also safe and designed to perform. Brixton Forged has its own team of Mechanical Engineers and technical staff who individually engineer and conduct FEA testing on every wheel set. Their product development team’s wealth of experience enables them to consistently deliver wheels of the highest quality in the industry. Their team of professional Mechanical Engineers ensures no compromises are made throughout the product development process. With a deep understanding of Vehicle Dynamics, OEM load ratings, and Material Science, their team possesses the necessary skills to engineer wheels that are both visually impressive and safe, designed to deliver exceptional performance.