What seats is the BRIDE Super Seat Rail ZF Type compatible with?

The ZF Type is designed exclusively for the BRIDE ZODIA. No other seat models are listed as compatible. The ZODIA is also explicitly excluded from all other BRIDE performance rails, making the ZF Type the only supported rail for this seat.

Why does the ZODIA require a dedicated rail?

The ZODIA has a distinct mounting base geometry from other fixed bucket seats in the BRIDE range, requiring a rail breadth of 370mm that is unique within the BRIDE performance lineup. No other performance rail matches this dimension; the FO, FG, IG, FK, FB, and FT Types all use a 395mm breadth, and the XL Type uses 430mm. The ZF Type is specifically engineered to the ZODIA's mounting footprint to deliver the correct fitment and the full depth of the 80mm position drop.

How much does the ZF Type lower the seat position?

The ZF Type delivers a super low seating position of up to 80mm below standard, equal to the LF Type and the deepest position drop available in the BRIDE rail lineup. The actual reduction achieved is vehicle-dependent and the maximum 80mm is not guaranteed across all fitments. Buyers should confirm the achievable drop for their specific vehicle before purchasing.

Can any other rail be used with the ZODIA?

No. The ZODIA is explicitly excluded from every other performance rail in the BRIDE lineup, including the FO, FG, IG, FK, FB, FT, and LF Types. The ZF Type is the only supported rail for the ZODIA. There is no alternative within the BRIDE range.

How does the ZF Type compare to the LF Type?

Both the ZF Type and LF Type deliver a maximum seat position drop of up to 80mm, the deepest available in the BRIDE lineup, and are both priced at JPY 31,900. The difference is the seat they serve; the LF Type is exclusively for BRIDE LOWMAX series seats including the VIOS III series, ZIEG IV series, MAXIS III, and edirb 042 and 061, while the ZF Type is exclusively for the ZODIA. The two rails also use different breadth dimensions; the LF Type uses 395mm and the ZF Type uses 370mm, reflecting the different mounting footprints of the seats they support.

What are the mounting dimensions of the ZF Type rail?

The ZF Type has mounting dimensions of 290mm length with a ±5mm tolerance and 370mm breadth. The 370mm breadth is specific to the ZODIA and differs from every other performance rail in the BRIDE lineup. Dimensional similarity to other rails does not indicate cross-compatibility.

Is the BRIDE Super Seat Rail ZF Type made in Japan?

Yes. The ZF Type is manufactured in Japan to BRIDE's quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BRIDE ZF Super Seat Rail

The BRIDE Super Seat Rail ZF Type is a Japanese-manufactured performance seat rail, developed exclusively for the BRIDE ZODIA. With a super low seating position of up to 80mm below standard subject to vehicle type, the ZF Type matches the LF Type as the deepest position rail available in the BRIDE lineup, while being engineered specifically around the mounting geometry of the ZODIA rather than the LOWMAX series seats the LF Type supports. Mounting dimensions are 290mm length (±5mm tolerance) x 370mm breadth. The 370mm breadth is unique within the BRIDE performance rail range; narrower than the 395mm found on the FO, FG, IG, FK, FB, and FT Type rails and the 430mm of the XL Type, reflecting the specific base geometry of the ZODIA. No other seat is listed as compatible with the ZF Type and no other BRIDE performance rail supports the ZODIA, which is explicitly excluded from every other rail in the lineup.

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

BRIDE utilizes exclusively manufactured parts from Faurecia (France), one of the world‘s premier mechanical parts suppliers, for their BRIDE super seat rail sliders, which are a critical component
The sliders, boasting 2.0mm thick upper rails and 2.3mm thick lower rails, are equipped with locking mechanisms on both the left and right sides, providing exceptional strength and resilience without any rattling. Its 10 mm pitch and slide amount are both 220 mm.

ASEA-Approved High Quality & Peace of Mind

The super seat rail has been approved by ASEA, a prestigious organization that involves motorsports companies and manufacturers and sellers of tuning parts in Japan, and has passed all of their standards

Features

The position of the lowest point can vary up to 80mm, depending on the type of vehicle
Manufactured in Japan
Seat mounting dimensions / length:
- 290mm (+5/-5) x 370mm
Only for ZODIA

Applications

ZODIA Series

Frequently Asked Questions

What seats is the BRIDE Super Seat Rail ZF Type compatible with? The ZF Type is designed exclusively for the BRIDE ZODIA. No other seat models are listed as compatible. The ZODIA is also explicitly excluded from all other BRIDE performance rails, making the ZF Type the only supported rail for this seat.
Why does the ZODIA require a dedicated rail? The ZODIA has a distinct mounting base geometry from other fixed bucket seats in the BRIDE range, requiring a rail breadth of 370mm that is unique within the BRIDE performance lineup. No other performance rail matches this dimension; the FO, FG, IG, FK, FB, and FT Types all use a 395mm breadth, and the XL Type uses 430mm. The ZF Type is specifically engineered to the ZODIA’s mounting footprint to deliver the correct fitment and the full depth of the 80mm position drop.
How much does the ZF Type lower the seat position? The ZF Type delivers a super low seating position of up to 80mm below standard, equal to the LF Type and the deepest position drop available in the BRIDE rail lineup. The actual reduction achieved is vehicle-dependent and the maximum 80mm is not guaranteed across all fitments. Buyers should confirm the achievable drop for their specific vehicle before purchasing.
Can any other rail be used with the ZODIA? No. The ZODIA is explicitly excluded from every other performance rail in the BRIDE lineup, including the FO, FG, IG, FK, FB, FT, and LF Types. The ZF Type is the only supported rail for the ZODIA. There is no alternative within the BRIDE range.
How does the ZF Type compare to the LF Type? Both the ZF Type and LF Type deliver a maximum seat position drop of up to 80mm, the deepest available in the BRIDE lineup, and are both priced at JPY 31,900. The difference is the seat they serve; the LF Type is exclusively for BRIDE LOWMAX series seats including the VIOS III series, ZIEG IV series, MAXIS III, and edirb 042 and 061, while the ZF Type is exclusively for the ZODIA. The two rails also use different breadth dimensions; the LF Type uses 395mm and the ZF Type uses 370mm, reflecting the different mounting footprints of the seats they support.
What are the mounting dimensions of the ZF Type rail? The ZF Type has mounting dimensions of 290mm length with a ±5mm tolerance and 370mm breadth. The 370mm breadth is specific to the ZODIA and differs from every other performance rail in the BRIDE lineup. Dimensional similarity to other rails does not indicate cross-compatibility.
Is the BRIDE Super Seat Rail ZF Type made in Japan? Yes. The ZF Type is manufactured in Japan to BRIDE’s quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.

About BRIDE

BRIDE is a Japan-based manufacturer specializing in seats and rail components designed to sit closest to the driver, offering maximum protection in a collision. Their ASEA-accredited products meet full vehicle inspection standards and pass six rigorous safety tests covering seat back impact, head restraint performance, seat and belt mounting, and flame resistance. BRIDE is also the first Japanese company to receive FIA endorsement for its seats, with nine models approved for international competition. Every seat is built by hand in Japan using precision-engineered shells and technical fabrics, with all components sourced domestically to keep quality tightly controlled from start to finish. For BRIDE, “Made in Japan” reflects a long-held standard built on ingenuity, meticulous craftsmanship, and technical knowledge; qualities that make their seats a trusted choice in the demanding environment of motorsport.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BRIDE ZF Super Seat Rail [TYPE-ZF]

Guaranteed Safe Checkout

BRIDE ZF Super Seat Rail

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

Features

Applications

Frequently Asked Questions

About BRIDE

Reviews