What seats is the BRIDE Super Seat Rail RB Type compatible with?

Without additional hardware, the RB Type is compatible with BRIDE GIAS series, STRADIA series, edirb 023, edirb 033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, and PROS; RECARO SR series and L series; and GULL and D&W seats. With the use of an import side stay, compatibility extends to the RECARO SPG-N and SPARCO CORSA, REVII, PRO2000, and EVO, as well as any other seat within the 260mm x 405mm mounting dimensions.

How does the RB Type differ from the RO Type?

Both the RB Type and RO Type share the same mounting dimensions of 260mm (25mm + 235mm) x 405mm and the same seat compatibility range, including the same import side stay requirements. The RB Type is priced higher at JPY 40,700 compared to the RO Type at JPY 29,700, reflecting differences in construction approach. Both carry the same seat height caveat that the seat position may not be lower depending on the vehicle, and both require the dedicated LR type rail for GIAS and STRADIA series seats in vehicles where a dedicated LR type is available.

Should I use the RB Type or the LR Type for a BRIDE GIAS or STRADIA series seat?

This depends on your specific vehicle. For vehicle models where a dedicated LR type rail is available, BRIDE recommends using the LR type when fitting a reclining LOW MAX series seat such as the GIAS or STRADIA series. The RB Type is compatible with these seats but should only be used in vehicles where no dedicated LR type rail exists. Confirm whether an LR type rail is available for your vehicle before purchasing the RB Type for use with these seats.

Will the RB Type lower the seat position in my vehicle?

Not necessarily. Depending on the vehicle, the seat position may not be lower after installation compared to the standard seating height. Buyers for whom achieving a lower seat position is a priority should confirm the position drop the RB Type delivers for their specific vehicle before purchasing.

Do I need an import side stay to fit a SPARCO or RECARO SPG-N seat with the RB Type?

Yes. The RECARO SPG-N and SPARCO CORSA, REVII, PRO2000, and EVO require an import side stay to be used alongside the RB Type. Without the import side stay, these seats are not compatible. Confirm availability of the appropriate import side stay before purchasing if fitting any of these seats.

Is the RB Type compatible with BRIDE performance fixed bucket seats?

No. The RB Type is designed for reclining and comfort seat models. BRIDE performance fixed bucket seats such as the ZIEG IV, ZETA IV, and XERO series use different mounting dimensions and require the appropriate performance rail such as the FO Type, FG Type, or equivalent within the BRIDE performance rail range.

Is the BRIDE Super Seat Rail RB Type made in Japan?

Yes. The RB Type is manufactured in Japan to BRIDE's quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BRIDE RB Super Seat Rail

The BRIDE Super Seat Rail RB Type is a Japanese-manufactured reclining seat rail, designed for the BRIDE reclining and comfort seat lineup alongside a broad range of RECARO, SPARCO, and other aftermarket seats. With mounting dimensions of 260mm in length (25mm + 235mm) and 405mm in breadth, the RB Type shares its dimensional footprint with the RO Type rail but sits at a higher price point, reflecting differences in construction and engineering approach. For BRIDE seats, the RB Type supports the GIAS series, STRADIA series, edirb 023, edirb 033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, and PROS. For RECARO seats, it is compatible with the SR series and L series. Additional compatibility covers GULL and D&W seats. With the use of an import side stay, the rail also supports the RECARO SPG-N and SPARCO CORSA, REVII, PRO2000, and EVO, as well as any other seat that falls within the stated mounting dimensions.

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

BRIDE relies on Faurecia (France), one of the world‘s leading mechanical parts manufacturers, to provide exclusively made components for their BRIDE super seat rail sliders, which are a vital part
The sliders are equipped with top rails that measure 2.0mm in thickness and base rails measuring a slightly more substantial 2.3mm, providing locking on both the left and right sides to ensure there is no rattling during use while also offering superior strength as well as durability due to its 10 mm pitch over 220 mm of slide amount.

ASEA-Approved High Quality & Peace of Mind

This product, dubbed the ‘Super Seat Rail‘, has been certified by ASEA – an industry body made up of motorsport companies and suppliers who produce/sell tuning parts. The item meets all criteria laid out by ASEA in line with Japanese standards.

Features

Manufactured in Japan
Seat mounting dimensions / length:
- 260mm (25mm＋235mm) x 405mm

Applications

Notes

If the LOW MAX Series (GIAS / STRADIA series) reclines and there is a set of dedicated rails for your vehicle, please use the LR type that was made specifically for it
The shoulder area and the door of a car may come into conflict, depending on which model it is
The position of the seat will vary depending on what kind of vehicle it is

Frequently Asked Questions

What seats is the BRIDE Super Seat Rail RB Type compatible with? Without additional hardware, the RB Type is compatible with BRIDE GIAS series, STRADIA series, edirb 023, edirb 033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, and PROS; RECARO SR series and L series; and GULL and D&W seats. With the use of an import side stay, compatibility extends to the RECARO SPG-N and SPARCO CORSA, REVII, PRO2000, and EVO, as well as any other seat within the 260mm x 405mm mounting dimensions.
How does the RB Type differ from the RO Type? Both the RB Type and RO Type share the same mounting dimensions of 260mm (25mm + 235mm) x 405mm and the same seat compatibility range, including the same import side stay requirements. The RB Type is priced higher at JPY 40,700 compared to the RO Type at JPY 29,700, reflecting differences in construction approach. Both carry the same seat height caveat that the seat position may not be lower depending on the vehicle, and both require the dedicated LR type rail for GIAS and STRADIA series seats in vehicles where a dedicated LR type is available.
Should I use the RB Type or the LR Type for a BRIDE GIAS or STRADIA series seat? This depends on your specific vehicle. For vehicle models where a dedicated LR type rail is available, BRIDE recommends using the LR type when fitting a reclining LOW MAX series seat such as the GIAS or STRADIA series. The RB Type is compatible with these seats but should only be used in vehicles where no dedicated LR type rail exists. Confirm whether an LR type rail is available for your vehicle before purchasing the RB Type for use with these seats.
Will the RB Type lower the seat position in my vehicle? Not necessarily. Depending on the vehicle, the seat position may not be lower after installation compared to the standard seating height. Buyers for whom achieving a lower seat position is a priority should confirm the position drop the RB Type delivers for their specific vehicle before purchasing.
Do I need an import side stay to fit a SPARCO or RECARO SPG-N seat with the RB Type? Yes. The RECARO SPG-N and SPARCO CORSA, REVII, PRO2000, and EVO require an import side stay to be used alongside the RB Type. Without the import side stay, these seats are not compatible. Confirm availability of the appropriate import side stay before purchasing if fitting any of these seats.
Is the RB Type compatible with BRIDE performance fixed bucket seats? No. The RB Type is designed for reclining and comfort seat models. BRIDE performance fixed bucket seats such as the ZIEG IV, ZETA IV, and XERO series use different mounting dimensions and require the appropriate performance rail such as the FO Type, FG Type, or equivalent within the BRIDE performance rail range.
Is the BRIDE Super Seat Rail RB Type made in Japan? Yes. The RB Type is manufactured in Japan to BRIDE’s quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.

About BRIDE

BRIDE is a Japan-based manufacturer specializing in seats and rail components designed to sit closest to the driver, offering maximum protection in a collision. Their ASEA-accredited products meet full vehicle inspection standards and pass six rigorous safety tests covering seat back impact, head restraint performance, seat and belt mounting, and flame resistance. BRIDE is also the first Japanese company to receive FIA endorsement for its seats, with nine models approved for international competition. Every seat is built by hand in Japan using precision-engineered shells and technical fabrics, with all components sourced domestically to keep quality tightly controlled from start to finish. For BRIDE, “Made in Japan” reflects a long-held standard built on ingenuity, meticulous craftsmanship, and technical knowledge; qualities that make their seats a trusted choice in the demanding environment of motorsport.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BRIDE RB Super Seat Rail [TYPE-RB]

Guaranteed Safe Checkout

BRIDE RB Super Seat Rail

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

ASEA-Approved High Quality & Peace of Mind

Features

Applications

Notes

Frequently Asked Questions

About BRIDE

Reviews