What seats is this BRIDE comfort seat rail compatible with?

This rail is compatible with the following seats: BRIDE EUROSTER series, DIGO series, edirb 032, edirb 054, EURO II series, BRIX (old), ERGO (old), XAX (old), and REVS; and SPARCO STAR2, TORINO2, MILANO2, MONZA, SPORTIVO, SPEED, and SPRINT. No import side stay is required for any of the listed compatible seats.

What are the mounting dimensions of this rail?

This rail has two sets of mounting dimensions: 330mm length x 290mm breadth, and 271mm length x 345mm breadth. The dual dimension configuration accommodates the varied mounting footprints found across the comfort and reclining seat models it is designed to support.

Will this rail lower the seat position in my vehicle?

Not necessarily. Depending on the vehicle, the seat position may not be lower after installation compared to other rail options. If achieving the lowest possible seat height is important for your fitment, confirm whether this rail delivers the required position drop for your specific vehicle before purchasing.

How does this rail differ from the standard BRIDE comfort seat rail?

Both rails share the same mounting dimensions and seat compatibility list. The distinction is that this rail carries a vehicle-dependent seat height caveat; depending on the vehicle, it may not achieve a lower seat position. The standard comfort rail does not carry this note. Buyers for whom seat height is a critical factor should compare both options against their specific vehicle before purchasing.

Is an import side stay required to use this rail?

No. All seats listed as compatible with this rail are directly compatible without the need for an import side stay, consistent with the standard BRIDE comfort rail and unlike certain configurations of the performance-oriented RO Type and FO Type rails.

Is this rail compatible with BRIDE performance bucket seats?

No. This rail is designed for BRIDE comfort and reclining seat models. Performance fixed-back bucket seats such as the ZIEG IV, ZETA IV, and XERO series use different mounting dimensions and require the appropriate performance rail such as the RO Type or FO Type.

Is this BRIDE seat rail made in Japan?

Yes. This rail is manufactured in Japan to BRIDE's quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BRIDE MB Super Seat Rail

This BRIDE Japanese-manufactured seat rail is built for comfort and reclining seat models, with dual mounting dimensions of 330mm length x 290mm breadth and 271mm length x 345mm breadth. It shares the same seat compatibility range as the previous comfort rail in the BRIDE lineup, covering the EUROSTER series, DIGO series, edirb 032, edirb 054, EURO II series, legacy BRIDE comfort models including the BRIX, ERGO, and XAX, and the REVS. For SPARCO seats, it is compatible with the STAR2, TORINO2, MILANO2, MONZA, SPORTIVO, SPEED, and SPRINT. The key fitment consideration specific to this rail is that, depending on the vehicle, the seat position may not be lower after installation compared to other rail options. Buyers for whom achieving the lowest possible seating height is a priority should confirm whether this rail delivers the required position drop in their specific vehicle before purchasing.

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

BRIDE employs Faurecia (France), a top–tier mechanical parts producer, to exclusively produce and provide the parts for the BRIDE super seat rail‘s necessary sliders
This sliding mechanism is equipped with 2.0mm thick upper rails and 2.3mm thick lower rails, and it is able to securely fasten on both the left and right sides. Additionally, it is designed to be exceptionally sturdy and durable, without any rattling noise, and has a pitch of 10 mm with a slide amount of 220 mm.

ASEA-Approved High Quality & Peace of Mind

The super seat rail has been approved by ASEA, an industry organization consisting of motorsports companies and associated tuning parts manufacturers and distributors from Japan, meeting all of the organization‘s standards.

Features

Manufactured in Japan
Seat mounting dimensions / length:
- 330mm x 290mm, 271mm x 345mm

Applications

Notes

The seat position may vary depending on the kind of vehicle

Frequently Asked Questions

What seats is this BRIDE comfort seat rail compatible with? This rail is compatible with the following seats: BRIDE EUROSTER series, DIGO series, edirb 032, edirb 054, EURO II series, BRIX (old), ERGO (old), XAX (old), and REVS; and SPARCO STAR2, TORINO2, MILANO2, MONZA, SPORTIVO, SPEED, and SPRINT. No import side stay is required for any of the listed compatible seats.
What are the mounting dimensions of this rail? This rail has two sets of mounting dimensions: 330mm length x 290mm breadth, and 271mm length x 345mm breadth. The dual dimension configuration accommodates the varied mounting footprints found across the comfort and reclining seat models it is designed to support.
Will this rail lower the seat position in my vehicle? Not necessarily. Depending on the vehicle, the seat position may not be lower after installation compared to other rail options. If achieving the lowest possible seating height is important for your fitment, confirm whether this rail delivers the required position drop for your specific vehicle before purchasing.
How does this rail differ from the standard BRIDE comfort seat rail? Both rails share the same mounting dimensions and seat compatibility list. The distinction is that this rail carries a vehicle-dependent seat height caveat; depending on the vehicle, it may not achieve a lower seat position. The standard comfort rail does not carry this note. Buyers for whom seat height is a critical factor should compare both options against their specific vehicle before purchasing.
Is an import side stay required to use this rail? No. All seats listed as compatible with this rail are directly compatible without the need for an import side stay, consistent with the standard BRIDE comfort rail and unlike certain configurations of the performance-oriented RO Type and FO Type rails.
Is this rail compatible with BRIDE performance bucket seats? No. This rail is designed for BRIDE comfort and reclining seat models. Performance fixed-back bucket seats such as the ZIEG IV, ZETA IV, and XERO series use different mounting dimensions and require the appropriate performance rail such as the RO Type or FO Type.
Is this BRIDE seat rail made in Japan? Yes. This rail is manufactured in Japan to BRIDE’s quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.

About BRIDE

BRIDE is a Japan-based manufacturer specializing in seats and rail components designed to sit closest to the driver, offering maximum protection in a collision. Their ASEA-accredited products meet full vehicle inspection standards and pass six rigorous safety tests covering seat back impact, head restraint performance, seat and belt mounting, and flame resistance. BRIDE is also the first Japanese company to receive FIA endorsement for its seats, with nine models approved for international competition. Every seat is built by hand in Japan using precision-engineered shells and technical fabrics, with all components sourced domestically to keep quality tightly controlled from start to finish. For BRIDE, “Made in Japan” reflects a long-held standard built on ingenuity, meticulous craftsmanship, and technical knowledge; qualities that make their seats a trusted choice in the demanding environment of motorsport.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BRIDE MB Super Seat Rail [TYPE-MB]

Guaranteed Safe Checkout

BRIDE MB Super Seat Rail

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

ASEA-Approved High Quality & Peace of Mind

Features

Applications

Notes

Frequently Asked Questions

About BRIDE

Reviews