DISCONTINUED – BRIDE DIGO III LIGHT Reclining Bucket Seat – DISCONTINUED

BRIDE DIGO III LIGHT Reclining Bucket Seat

The DIGO II Series, DIGO II LIGHT and DIGO III offer an ultra–compact seat with a shoulder width of 465mm specifically designed for cars that have tight interiors such as light vehicles of 550 cc or less. The model‘s slimmed down shoulder support ensures comfortability while its lower knee section enhances convenience when entering/exiting the car – making it perfect for use in lightweight and small automobiles.

More Compact & Comfort New Model DIGO III LIGHT

• The DIGO Ⅲ model is a sleek and simple design that does away with the belt hole of its backrest. Compared to it‘s predecessor, the DIGO II LIGHT, this new version has lowered its overall height by 3cm which means that more models can now be mounted on it. Furthermore, there are two storage pockets added for extra practicality – making this an ideal sport seat choice for commercial vehicles such as small cars, trucks or vans.

High Hold Ability and High Quality Sitting Comfort Achieved By A High-Tensile Net

• The DIGO II LIGHT and DIGO III LIGHT have achieved an impressive level of hold that wraps around the body, as well as superior riding comfort due to a high–tensile net in their seat surfaces and backrests. This enables drivers to remain comfortable even on lengthy trips without suffering from fatigue.

Angle Can Be Adjusted With A Single Touch

• A Super Recliner that is Simple to Utilize
• Both the DIGO II LIGHT and DIGO III LIGHT are fitted with a super recliner, making it convenient to alter the angle of their backrests. All you need is one touch for these chairs‘ backs to fold forward. Additionally, users can take advantage of its quick lever which enables effortless positioning adjustments so that they always have an ideal sitting position tailored just for them.

Abundant Color Variation With 4 Colors

• The DIGO collection offers a wide range of colors to suit all types of vehicles
• In addition, for each model variant you can opt to get one that is equipped with a seat heater

With The Total Height of The Back Rest Reduced By 3cm

• It is compatible with the majority of cars for installation
• A reclining chair with a slim silhouette, upholstered in luxurious suede material
• The DIGO III LIGHT has enabled a more compact seat width of 485mm by slimming down the shoulder support and seat surface. Its design was created with boarding/exiting convenience in mind, as well as having lowered knee supports for improved comfortability. The polyurethane material on the seat surface is softer than before, while also providing an added pocket to its back rest for extra utility purposes
• This piece of furniture features a luxurious suede fabric for its seat material. It has an exquisite texture and also offers some slip–resistance, which provides just the right amount of grip.

A Compact Size Perfect For Car Models With Tight Interiors Such As Small Cars

• The DIGO III LIGHT has had its shoulder support area significantly reduced, resulting in a much more compact design with a seat width of 485mm. This makes it an ideal choice for vehicles with small interiors where the installation of sports seats would otherwise be impractical — such as those found in compacts cars.

Seat Heater Installation Models Can Also Be Selected

• DIGO III LIGHT models can all be equipped with seat heaters that come pre–installed with a built–in heater on the back and seating surface. Unlike an air conditioner, which runs off of engine heat, this seat warmer will quickly warm up even in cold winter weather. When used together with an AC unit, it warms your body directly from the core in no time while also reducing moisture inside a vehicle‘s interior; connection to any 12V car cigar socket is quick and easy for two temperature control stages so as to maintain ideal temperatures – perfect for open cars too!

Seat Rail Compatibility

• MO
• MB
• MK
• YZ

Notes

• The seat heater unit cannot be purchased as a stand–alone item or installed after the initial purchase
• It is not possible to use more than one seat heater at once

About BRIDE

For safety. Made using only Made in Japan.

• BRIDE produces all its seats and seat rail products, which are closest to the driver and also protect the driver’s body in the case of an accident, domestically in Japan. BRIDE’s seats are ASEA-approved products which have cleared the standards of ASEA, the industry organization whose members comprise motorsports companies and related tuning parts manufacture and sales companies which represent Japan, and are models which conform to vehicle inspections and have cleared rigorous safety benchmarks. The safety benchmark comprises 6 items–“seat back rear surface crash test”, “head restraint forward crash test”, “head restraint static test”, “seat and seat mounting test”, “seat belt mounting test”, and “flame resistance test”–in which a great amount of force is applied to the seats assuming an accident to check whether the seats are damaged and whether they can be maintained for the regulated time, and to confirm the safety of the seats.
• Also, BRIDE’s seats are the first seats produced in Japan to be licensed by FIA, and they provide 9 models which can be used in international races. In order to maintain and improve product quality to pass safety benchmarks and strict FIA strength tests, BRIDE conducts thorough management of its manufacturing process.

In order to provide high quality seats, craftsmen with the highly refined skills to manufacture by hand, materials developed with advanced technology such as shells and cloth, and the logistics to manufacture and ship to the market with stability are all essential. In order to strictly control and maintain seat quality, they only use Made in Japan.

And at BRIDE, they also feel that the words “Made in Japan” indicate a trust developed by Japan over many years and a quality recognized around the world. These words show the face of a manufacturer, and imply Japan’s unique fine skills, abundant creative power, and commitment to refined hand-made technology and sensitivity.

Always keeping in mind the racing scene where lives are on the line, “Made in Japan” is an essential commitment for BRIDE in its production of safe and high quality seats.