Do the GiroDisc BMW G8X 370mm rear rotors fit carbon ceramic cars?

No. The GiroDisc BMW G8X 370mm rear rotors are for cars without carbon ceramic brakes. If your M2, M3, or M4 came with carbon ceramic brakes, you need the GiroDisc rear iron rotor conversion (A2-322), which is a different part.

What are the GiroDisc BMW G8X 370mm rear rotors made of?

The GiroDisc BMW G8X 370mm rear rotors use 370mm rings machined from a proprietary high-carbon iron casting with 48 curved cooling vanes, a reusable 6061-T6 anodized aluminum hat, and cadmium-plated high-strength steel drive pins. All major parts are made in-house in Bellingham, WA.

What happens when the GiroDisc BMW G8X 370mm rear rotor rings wear out?

Only the rings need replacing, not the full assembly. The reusable 6061-T6 aluminum hat is retained, and new rings (D2-282) attach to it. Replace the rings at a minimum thickness of 22mm, or sooner if a crack reaches the edge of the ring.

Are the GiroDisc BMW G8X 370mm rear rotors noisy on the street?

No. The GiroDisc BMW G8X 370mm rear rotors use spring clips and Belleville washers that give race-ready float while staying street-friendly, with no noise from loose hardware. They are suited to both street and track use.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

GiroDisc Rear 370mm Slotted Rotors for G8X BMW M2, M3 and M4 (w/o carbon ceramic brakes)

BMW G8X 370mm rear rotors from GiroDisc are 2-piece, fully floating 370mm rear rotors, a direct replacement for the factory rear rotors on the G80 M3, G82 / G83 M4, and G87 M2 without carbon ceramic brakes. These GiroDisc BMW G8X 370mm rear rotors help shed unsprung weight and rotating mass, pairing a proprietary high-carbon iron ring with a reusable 6061-T6 aluminum hat for a race-ready assembly that stays street-friendly. The 48 curved vanes act as a centrifugal pump, pulling air in through the hub to effectively cool the rotors under hard use. Sold and priced per pair.

Why the GiroDisc BMW G8X 370mm Rear Rotors?

The GiroDisc BMW G8X 370mm rear rotors use a 2-piece, fully floating design that sheds unsprung weight and rotating mass versus the heavy factory one-piece rotor, improving braking response and reducing thermal transfer to the hub and bearings. The rings are machined from a proprietary casting of high-carbon iron formulated to GiroDisc’s specifications, superior metallurgy that holds up better under repeated hard stops. The assembly uses spring clips and Belleville washers for race-ready float while staying quiet on the street, with no noise from loose hardware.

Cooling and Construction

The 48 curved internal vanes of the GiroDisc BMW G8X 370mm rear rotors act as a centrifugal pump, pulling air in through the hub to cool the rings effectively when the brakes are working hardest. The reusable hat is machined from 6061-T6 aluminum and finished in black anodize, while the drive pins are made from a high-strength steel alloy and cadmium-plated to resist corrosion. All major components, including the hats, rings, and drive pins, are manufactured in-house in Bellingham, WA, from domestically sourced materials.

A Reusable Two-Piece Design

The 2-piece design of the GiroDisc BMW G8X 370mm rear rotors means the aluminum hat is reusable. When the rings wear out, you replace only the rings (GiroDisc part number D2-282) and reuse your existing hats, lowering the long-term cost of maintaining the brakes. GiroDisc recommends replacing the rings at a minimum thickness of 22mm, or sooner if a crack reaches the edge of the ring.

Features

2-piece, fully floating 370mm rear rotor assembly
Direct replacement for the factory rear rotors on non-carbon-ceramic cars
For the G80 M3, G82 / G83 M4, and G87 M2 without carbon ceramic brakes
High-carbon iron rings, proprietary GiroDisc casting
48 curved cooling vanes that pump air through the hub
Reusable 6061-T6 aluminum hat with black anodize finish
High-strength steel alloy drive pins, cadmium-plated for corrosion resistance
Spring clips and Belleville washers for race-ready float with no street noise
Sheds unsprung weight and rotating mass
Rings replaceable separately (D2-282) using the reusable hats
Manufactured in-house in the USA from domestically sourced materials

Applications

BMW M2: G87 | 2023-present
BMW M3: G80 | 2020-present
BMW M4: G82 / G83 | 2020-present

Notes

Sold and priced per pair (one set of rear rotors)
Fits cars without carbon ceramic brakes only. Cars originally equipped with carbon ceramic brakes require the rear iron rotor conversion (A2-322) instead.
This is the complete rotor assembly. When the rings wear, replacement rings (D2-282) reuse your existing GiroDisc hats and fit GiroDisc hats only, not OEM or other-brand hats.
Replace the rings at a minimum thickness of 22mm, or sooner if a crack reaches the edge of the ring
Stock photography may not depict the actual product

Frequently Asked Questions

Which cars do the GiroDisc BMW G8X 370mm rear rotors fit? The GiroDisc BMW G8X 370mm rear rotors are a direct replacement for the factory rear rotors on the G80 M3, G82/G83 M4, and G87 M2 without carbon ceramic brakes. Cars with factory carbon ceramic brakes require the rear iron rotor conversion (A2-322) instead.
Do the GiroDisc BMW G8X 370mm rear rotors fit carbon ceramic cars? No. The GiroDisc BMW G8X 370mm rear rotors are for cars without carbon ceramic brakes. If your M2, M3, or M4 came with carbon ceramic brakes, you need the GiroDisc rear iron rotor conversion (A2-322), which is a different part.
What are the GiroDisc BMW G8X 370mm rear rotors made of? The GiroDisc BMW G8X 370mm rear rotors use 370mm rings machined from a proprietary high-carbon iron casting with 48 curved cooling vanes, a reusable 6061-T6 anodized aluminum hat, and cadmium-plated high-strength steel drive pins. All major parts are made in-house in Bellingham, WA.
What happens when the GiroDisc BMW G8X 370mm rear rotor rings wear out? Only the rings need replacing, not the full assembly. The reusable 6061-T6 aluminum hat is retained, and new rings (D2-282) attach to it. Replace the rings at a minimum thickness of 22mm, or sooner if a crack reaches the edge of the ring.
Are the GiroDisc BMW G8X 370mm rear rotors noisy on the street? No. The GiroDisc BMW G8X 370mm rear rotors use spring clips and Belleville washers that give race-ready float while staying street-friendly, with no noise from loose hardware. They are suited to both street and track use.

About GiroDisc

GiroDisc designs, manufactures, and sells 2-piece, fully floating brake rotors for a wide range of performance vehicles. Every major component, including the hats, rotor rings, and drive pins, is manufactured in-house at their facility in Bellingham, Washington, from domestically sourced materials. GiroDisc rotors use a proprietary high-carbon iron ring formulated for superior metallurgy and thermal performance, paired with reusable machined-aluminum hats that reduce the long-term cost of maintaining a high-performance brake system. The 2-piece floating design sheds unsprung and rotating mass while remaining street-friendly, delivering race-proven braking for track and street use alike.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

GiroDisc Rear 370mm Slotted Rotors for G8X BMW M2, M3 and M4 (w/o carbon ceramic brakes) [A2-282]

Guaranteed Safe Checkout

GiroDisc Rear 370mm Slotted Rotors for G8X BMW M2, M3 and M4 (w/o carbon ceramic brakes)

Why the GiroDisc BMW G8X 370mm Rear Rotors?

Cooling and Construction

A Reusable Two-Piece Design

Features

Applications

Notes

Frequently Asked Questions

About GiroDisc

Reviews