Do the BILSTEIN EVO SE Plug and Play Coilovers for G20 fit the M340i?

Yes. BILSTEIN lists the rear-drive M340i from 2020 to 2025 with adaptive dampers, along with the 330i from 2019, the 330e from 2021 and the 430i from 2021. xDrive cars take a separate EVO SE kit, which Bulletproof Automotive also stocks.

What ride height range does the kit give the rear-drive G20 and G22?

BILSTEIN quotes lowering of 25mm to 45mm at the front and 20mm to 45mm at the rear on the 330e and 330i, and 25mm to 40mm at the front and 20mm to 45mm at the rear on the 430i and M340i. On the G20 3 Series, the threaded bodies set the exact height inside that range. The EVO SE Plug and Play Coilovers are rated for axle loads up to 1,075kg front and 1,325kg rear.

Is any coding needed after installation?

BILSTEIN describes EVO SE as a true plug and play package that works through the original damper control of the rear-drive G20 and G22. The dampers connect at the factory plugs and the G20 3 Series keeps running its own electronic damping, so the job is mechanical, followed by a wheel alignment.

Does the kit need a wheel alignment afterwards?

Yes. Any change to ride height alters camber and toe, so the rear-drive G20 and G22 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the EVO SE kit with its Limited 5-Year Warranty, and any claim for the rear-drive G20 and G22 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series

BILSTEIN’s EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series fit the rear-drive 330i, 330e, M340i and 430i built with adaptive dampers. The EVO SE dampers connect at the factory plugs and answer to the original control unit, so the drive modes stay, and threaded bodies bring the car 25mm to 45mm closer to the road at the front.

Design and Performance

Progressive springs at 405 lbs/in front and 756 lbs/in rear, finished in blue on this kit, sit on grey twintube EVO SE dampers.

Features

Electronic damping control through the factory system of the G20 3 Series, connected at the original plugs
Height-adjustable twintube dampers with threaded bodies for setting the stance of the G20 3 Series
Progressive springs finished in blue, with rates matched to the front and rear axle loads of the G20 3 Series
BILSTEIN Limited 5-Year Warranty, with the EVO SE Plug and Play Coilovers made in Germany

Specifications

Damping adjustment: Electronic, through the factory adaptive system
Damper design: Twintube
Front spring rate: 405 lbs/in, progressive
Rear spring rate: 755.96 lbs/in, progressive
Front lowering: 25-45mm or 25-40mm, by model
Rear lowering: 20-45mm
Maximum axle load: Up to 1,075kg front, 1,325kg rear, by model
Finish: Grey dampers, blue springs
Country of origin: Germany
Warranty: BILSTEIN Limited 5-Year Warranty

Applications

BMW 3 Series: G20 (330e 2021-2022, 330i 2019-2021, M340i 2020-2025) | 2019-2025
BMW 4 Series: G22 (430i 2021-2025) | 2021-2025

Notes

BILSTEIN lists the kit for cars with electronic suspension (adaptive dampers)
For xDrive cars with adaptive dampers, BILSTEIN makes the EVO SE Plug and Play Coilovers for G20 xDrive
BILSTEIN specifies its coilover spanner wrench for setting the spring seats and lock rings on this kit
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Do the BILSTEIN EVO SE Plug and Play Coilovers for G20 fit the M340i? Yes. BILSTEIN lists the rear-drive M340i from 2020 to 2025 with adaptive dampers, along with the 330i from 2019, the 330e from 2021 and the 430i from 2021. xDrive cars take a separate EVO SE kit, which Bulletproof Automotive also stocks.
What ride height range does the kit give the rear-drive G20 and G22? BILSTEIN quotes lowering of 25mm to 45mm at the front and 20mm to 45mm at the rear on the 330e and 330i, and 25mm to 40mm at the front and 20mm to 45mm at the rear on the 430i and M340i. On the G20 3 Series, the threaded bodies set the exact height inside that range. The EVO SE Plug and Play Coilovers are rated for axle loads up to 1,075kg front and 1,325kg rear.
Is any coding needed after installation? BILSTEIN describes EVO SE as a true plug and play package that works through the original damper control of the rear-drive G20 and G22. The dampers connect at the factory plugs and the G20 3 Series keeps running its own electronic damping, so the job is mechanical, followed by a wheel alignment.
Does the kit need a wheel alignment afterwards? Yes. Any change to ride height alters camber and toe, so the rear-drive G20 and G22 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the EVO SE kit with its Limited 5-Year Warranty, and any claim for the rear-drive G20 and G22 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series [49-303391]

Guaranteed Safe Checkout

BILSTEIN EVO SE Plug and Play Coilovers for G20 BMW 3 Series and G22 4 Series

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews