Will the AWE ColdFront Heat Exchanger for Audi 3.0T fit my car?

This ColdFront Heat Exchanger for Audi 3.0T fits the 2010-2016 Audi S4 3.0T (B8 and B8.5), 2010-2016 Audi S5 3.0T Coupe, Cabriolet and Sportback (B8 and B8.5), 2013-2017 Audi Q5 3.0T and the other cars under Applications. AWE lists this heat exchanger as 49-state legal, so it is not for use on California-registered vehicles. Send us your VIN if you want fitment confirmed before ordering, and we will check it against the AWE fitment data.

Do I need the pump and reservoir too?

No. AWE sells the ColdFront Heat Exchanger, Reservoir and Coolant Pump separately, though they work best in combination. With the optional ColdFront Coolant Pump, AWE reports a 100 percent increase in coolant flow rate over the factory setup. We list each ColdFront part separately in our store.

How much power does it add?

AWE does not publish a dyno figure for this system on this car, so this listing makes no power claim. The case for it rests on the cooling and fitment details AWE does publish, listed above. If AWE publishes a test for this application, we will add the figures here.

It is a bolt-on part that fits in the factory location. AWE publishes an installation guide for it, linked in the Notes above. A shop with supercharged Audi experience can install it, and we can help confirm parts for your car before you order.

What guarantees come with it?

AWE backs this heat exchanger with its Perfect Fitment Guarantee. Contact Bulletproof Automotive with any warranty or fitment question and we will handle it directly with AWE on your behalf, including any claim that needs their review or a replacement part.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

AWE Tuning ColdFront Heat Exchanger for Audi 3.0T S4, S5, Q5 and SQ5

AWE Tuning’s ColdFront Heat Exchanger for Audi 3.0T S4, S5, Q5 and SQ5 is a larger front heat exchanger for the supercharged Audi 3.0T in the B8 and B8.5 S4 and S5 and the Q5 and SQ5, and AWE says it lowers intake air temperatures by up to 15 degrees F. It is the heat exchanger at the center of the AWE ColdFront system. AWE also reports coolant temperatures up to 24 degrees F lower, and it is the only heat exchanger on the market, per AWE, with a drain plug and bleed screw so no air is trapped when you add coolant.

The ColdFront System

The ColdFront Heat Exchanger, ColdFront Reservoir and ColdFront Coolant Pump work best in combination, but AWE sells each one separately. With the optional ColdFront Coolant Pump, AWE reports a 100 percent increase in coolant flow rate.

Drain Plug and Bleed Screw

AWE says this is the only heat exchanger on the market with a drain plug and bleed screw, which keeps air out of the system while adding coolant.

Features

ColdFront Heat Exchanger for Audi 3.0T, made for the cars listed under Applications
Intake air temperatures lowered by up to 15 degrees F, per AWE
Coolant temperatures lowered by up to 24 degrees F, per AWE
Drain plug and bleed screw for air-free filling
Maintains consistent power in extreme conditions
OEM fitment, designed in house at AWE
ColdFront Protection Screen sold separately

Specifications

Part Number: 4510-11032
Edition: ColdFront
Type: Heat Exchanger
Engine: Audi 3.0T supercharged V6
Service Features: Drain plug and bleed screw
Emissions: 49-state legal, per AWE
Guarantee: AWE Perfect Fitment

Applications

2010-2016 Audi S4 3.0T (B8 and B8.5)
2010-2016 Audi S5 3.0T Coupe, Cabriolet and Sportback (B8 and B8.5)
2013-2017 Audi Q5 3.0T
2014-2017 Audi SQ5 3.0T

Notes

This ColdFront Heat Exchanger for Audi 3.0T is listed for the vehicles under Applications only. AWE lists this heat exchanger as 49-state legal, so it is not for use on California-registered vehicles. Send us your VIN if you want fitment confirmed.
AWE does not publish a dyno figure for this system on this car, so no power gain is claimed.
AWE installation guide (PDF).

Frequently Asked Questions

Will the AWE ColdFront Heat Exchanger for Audi 3.0T fit my car? This ColdFront Heat Exchanger for Audi 3.0T fits the 2010-2016 Audi S4 3.0T (B8 and B8.5), 2010-2016 Audi S5 3.0T Coupe, Cabriolet and Sportback (B8 and B8.5), 2013-2017 Audi Q5 3.0T and the other cars under Applications. AWE lists this heat exchanger as 49-state legal, so it is not for use on California-registered vehicles. Send us your VIN if you want fitment confirmed before ordering, and we will check it against the AWE fitment data.
Do I need the pump and reservoir too? No. AWE sells the ColdFront Heat Exchanger, Reservoir and Coolant Pump separately, though they work best in combination. With the optional ColdFront Coolant Pump, AWE reports a 100 percent increase in coolant flow rate over the factory setup. We list each ColdFront part separately in our store.
How much power does it add? AWE does not publish a dyno figure for this system on this car, so this listing makes no power claim. The case for it rests on the cooling and fitment details AWE does publish, listed above. If AWE publishes a test for this application, we will add the figures here.
How does it install? It is a bolt-on part that fits in the factory location. AWE publishes an installation guide for it, linked in the Notes above. A shop with supercharged Audi experience can install it, and we can help confirm parts for your car before you order.
What guarantees come with it? AWE backs this heat exchanger with its Perfect Fitment Guarantee. Contact Bulletproof Automotive with any warranty or fitment question and we will handle it directly with AWE on your behalf, including any claim that needs their review or a replacement part.

About AWE Tuning

AWE Tuning began in 1991 as an installer of aftermarket parts, which is why every AWE product carries a written Fitment Guarantee. It designs, machines and tests in-house at its headquarters in Horsham, Pennsylvania, outside Philadelphia, with its own Mustang chassis dynamometer; one recent AWE carbon intake took more than 350 hours of development. AWE is best known for its handcrafted Touring Edition, Track Edition and SwitchPath exhausts, alongside carbon fiber intakes and intercoolers.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

AWE Tuning ColdFront Heat Exchanger for Audi 3.0T S4, S5, Q5 and SQ5 [4510-11032]

Guaranteed Safe Checkout

AWE Tuning ColdFront Heat Exchanger for Audi 3.0T S4, S5, Q5 and SQ5

The ColdFront System

Drain Plug and Bleed Screw

Features

Specifications

Applications

Notes

Frequently Asked Questions

About AWE Tuning

Reviews