Does the APR Carbon Fiber Intake for B9 A4 fit every A4?

No. The APR Carbon Fiber Intake for B9 A4 and A5 does not fit engines with a mass airflow sensor on the intake. APR excludes engine codes including CVK, CVL, DBP, DEM, DKY, DLV and DRX, the 188 to 190 hp DBPA A4 and the 201 hp DMSA A4 quattro and A5 Sportback from 2021.

How do I check whether my A4 or A5 has a MAF on the intake?

The engine code is the most reliable check. It appears on the service sticker in the spare wheel well or trunk and on the build data from a dealer. If the code matches one APR excludes, or a mass airflow sensor sits in the factory intake tube, this system will not fit.

How much more air does the APR A4 intake flow?

APR rates the system at 46 percent more flow than the factory intake, with lower pressure drop at the turbocharger inlet. That lets the turbo spool sooner and run more efficiently. APR does not publish a horsepower figure for this intake, so none is quoted here.

Does the APR B9 A5 intake need a tune?

No. APR states that no new tuning is needed to run the system, and all the new clamps required for installation are included. It works on a car with factory software and pairs well with an APR calibration, where the extra airflow is used most effectively.

Is the APR A4 intake filter washable?

Yes. The 7 x 7 inch filter uses washable pleated cotton gauze with a 5.5 inch frontal inlet and a 4 inch outlet. It can be cleaned and reused for an extended life, and its large surface area keeps it breathing freely between cleanings.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

APR Carbon Fiber Intake for B9 Audi A4 and A5

APR’s Carbon Fiber Intake for B9 Audi A4 and A5 gives the EA888 Gen 3 and Gen 4 2.0 TFSI a full intake upgrade, from the inlet scoop through a carbon fiber airbox to piping that stays at full size all the way to the turbocharger. The system flows 46 percent more than stock and reduces pressure drop, which helps the single turbo spool sooner and work more efficiently. A T304 stainless heat shield keeps hot air from around the turbo away from the filter. It is a strong match for a tuned A4, A4 allroad or A5, provided the engine is one of the versions APR lists, since cars with a mass airflow sensor on the intake are excluded.

Design and Performance

The airbox draws from a dedicated scoop and adds flow paths that face away from the engine, keeping intake temperatures down while adding induction sound that never becomes overbearing. The 7 x 7 inch filter, with a 5.5 inch frontal inlet and a 4 inch outlet, uses washable pleated cotton gauze, and all new clamps are included for installation.

Features

Full system replacing the inlet, airbox, filter and inlet piping
Carbon fiber airbox with additional flow paths facing away from the engine
T304 stainless steel heat shield
Inlet piping kept at full diameter from the 4 inch filter to the turbocharger
Washable pleated cotton gauze filter, 7 x 7 inch
No new tuning required

Applications

Audi A4: B9 | 2017-2025 | 2.0L I4 TFSI (including quattro)
Audi A4 allroad: B9 | 2017-2025 | 2.0L I4 TFSI
Audi A5: B9 | 2018-2024 | 2.0L I4 TFSI (quattro)
Audi A5 Sportback: B9 | 2018-2025 | 2.0L I4 TFSI

Notes

The Carbon Fiber Intake for B9 A4 and A5 does not fit engines with a mass airflow sensor on the intake, including engine codes CVK, CVL, DBP, DEM, DKY, DLV and DRX
Excluded: 2017 and later A4 2.0T with MAF on the intake (DBPA, 188 to 190 hp), and 2021 and later A4 quattro and A5 Sportback 2.0T with MAF on the intake (DMSA, 201 hp)
APR does not publish a power figure for this intake; it rates the flow at 46 percent more than stock

Frequently Asked Questions

Does the APR Carbon Fiber Intake for B9 A4 fit every A4? No. The APR Carbon Fiber Intake for B9 A4 and A5 does not fit engines with a mass airflow sensor on the intake. APR excludes engine codes including CVK, CVL, DBP, DEM, DKY, DLV and DRX, the 188 to 190 hp DBPA A4 and the 201 hp DMSA A4 quattro and A5 Sportback from 2021.
How do I check whether my A4 or A5 has a MAF on the intake? The engine code is the most reliable check. It appears on the service sticker in the spare wheel well or trunk and on the build data from a dealer. If the code matches one APR excludes, or a mass airflow sensor sits in the factory intake tube, this system will not fit.
How much more air does the APR A4 intake flow? APR rates the system at 46 percent more flow than the factory intake, with lower pressure drop at the turbocharger inlet. That lets the turbo spool sooner and run more efficiently. APR does not publish a horsepower figure for this intake, so none is quoted here.
Does the APR B9 A5 intake need a tune? No. APR states that no new tuning is needed to run the system, and all the new clamps required for installation are included. It works on a car with factory software and pairs well with an APR calibration, where the extra airflow is used most effectively.
Is the APR A4 intake filter washable? Yes. The 7 x 7 inch filter uses washable pleated cotton gauze with a 5.5 inch frontal inlet and a 4 inch outlet. It can be cleaned and reused for an extended life, and its large surface area keeps it breathing freely between cleanings.

About APR Tuning

APR was founded in 1997 and develops performance hardware, software and calibrations for Volkswagen, Audi, SEAT, Skoda and Porsche vehicles, from intakes, intercoolers and turbocharger systems to exhausts, brakes and suspension. It designs and manufactures from an 80,000 square foot headquarters in Opelika, Alabama, which it shares with Dinan as part of Holley Performance Brands, and delivers its software worldwide through a 24-hour automated system run from the same site.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

APR Carbon Fiber Intake for B9 Audi A4 and A5 [CI100036]

Guaranteed Safe Checkout

APR Carbon Fiber Intake for B9 Audi A4 and A5

Design and Performance

Features

Applications

Notes

Frequently Asked Questions

About APR Tuning

Reviews