Do the AlphaRex LUXX-Series Black-Red tail lights fit the Tesla Model S?

Yes. The AlphaRex LUXX-Series Black-Red tail lights are built specifically for the Tesla Model S (MS), covering model years 2012 through 2021. They use direct OEM fitment with no cutting, drilling, or bracket modifications required. Tesla Model S vehicles outside that production window are not a compatible application for this tail light.

What is included with this version, and what does the trunk center piece replacement do?

Each purchase includes one pair of AlphaRex LUXX-Series Black-Red tail lights covering both the driver and passenger sides, along with a black trunk center piece replacement, all required mounting hardware, and installation instructions. The black trunk center piece replaces the factory center section between the tail lights to complete the blacked-out rear appearance that the Black-Red housing finish establishes. For full installation details on the center piece, confirm the process with AlphaRex before beginning the swap.

How does the sequential turn signal work on the LUXX-Series Tesla Model S tail lights?

The AlphaRex LUXX-Series uses an amber sequential turn signal that sweeps across the housing in a smooth, fluid motion rather than flashing all at once. On a vehicle like the Model S, where the rear lighting spans the full width of the car, the sweeping effect is particularly noticeable and more attention-grabbing than a conventional static flash. It runs on the factory turn signal circuit with no additional wiring required.

Can condensation form inside these tail lights, and how is it managed?

Yes, condensation is a risk in any sealed lighting housing. Temperature changes cause moisture inside the housing cavity to cool and collect on the lens interior, regardless of how well the housing is sealed. The AlphaRex LUXX-Series addresses this with Nitto Denko TEMISH CAPSEAL Air Breather vents integrated into the housing. These vents allow air to move in and out naturally so moisture can escape before it accumulates, rather than being trapped inside a fully sealed cavity.

What are the tail light housing and lenses made from?

The housing is polypropylene (PP), a material that resists heat and moisture across a range of climates and driving conditions. The lenses are polycarbonate with two coatings applied: an anti-fog coating to reduce internal fogging in variable weather, and a UV-resistant coating to slow yellowing and oxidation so the lenses stay clearer over time.

Is installation plug-and-play on the Tesla Model S?

Yes. The AlphaRex LUXX-Series Black-Red tail lights connect directly to the factory wiring harness with no modifications needed. Installation instructions are included in the box. As with any lighting modification on a Tesla, confirming compatibility with the vehicle's software and electrical system before installation is a reasonable precaution, since Tesla vehicles can flag non-OEM components through onboard diagnostics.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

AlphaRex LUXX-Series LED Tail Lights Black-Red (With Black Trunk Center Piece Replacement) for MS Tesla Model S

The Tesla Model S is a proven platform that continues to attract enthusiasts looking for purposeful lighting upgrades. AlphaRex has developed dedicated tail lights to complement the vehicle’s front-end character with a refined, OEM-inspired look with precision LED optics. The LUXX-Series tail lights are purpose-built to enhance both aesthetics and on-road visibility without compromising fit, function, or regulatory compliance.

Light Features

The Tesla Model S tail lights use a LED light design powered by high-output LED technology for both low and high beam. A slim LED tube along the lower edge of the housing provides distinctive accent lighting. Amber sequential turn signals create a sweeping, dynamic indicator effect. An activation startup sequence illuminates the front lighting array at ignition for a signature visual impression.

Breathing Vents

Condensation is a common challenge in both OEM and aftermarket tail lights, as moisture can accumulate inside housings due to temperature changes even with strong seals. To address this, Nitto Denko TEMISH® CAPSEAL™ air vents promote efficient moisture discharge in the Tesla Model S tail lights. These vents improve airflow within the housing so moisture can escape naturally, functioning like a breathing mechanism, earning them the “Air Breathers” name.

Housing

The tail lights housing is constructed from high-quality polypropylene (PP) for lasting durability. Polypropylene’s strong resistance to heat and moisture helps maintain reliable performance across a wide range of driving conditions and climates.

Lens

The Tesla Model S tail lights use high-quality polycarbonate lenses engineered to withstand extreme weather conditions while delivering excellent lighting performance. An anti-fog coating reduces internal fogging and improves visibility in changing conditions. A protective UV-resistant coating is also applied to resist yellowing and oxidation, keeping the lenses clear and looking newer for longer.

Features

LED tube accent
Activation startup sequence
Sequential turn signal
LED light source
Direct OEM fitment, no modifications required
Plug-and-play installation

What’s Included

One pair of AlphaRex LUXX-Series tail lights (driver and passenger side)
Required mounting hardware
Installation instructions

Applications

Tesla Model S: MS | 2012-2021

Frequently Asked Questions

Do the AlphaRex LUXX-Series Black-Red tail lights fit the Tesla Model S? Yes. The AlphaRex LUXX-Series Black-Red tail lights are built specifically for the Tesla Model S (MS), covering model years 2012 through 2021. They use direct OEM fitment with no cutting, drilling, or bracket modifications required. Tesla Model S vehicles outside that production window are not a compatible application for this tail light.
What is included with this version, and what does the trunk center piece replacement do? Each purchase includes one pair of AlphaRex LUXX-Series Black-Red tail lights covering both the driver and passenger sides, along with a black trunk center piece replacement, all required mounting hardware, and installation instructions. The black trunk center piece replaces the factory center section between the tail lights to complete the blacked-out rear appearance that the Black-Red housing finish establishes. For full installation details on the center piece, confirm the process with AlphaRex before beginning the swap.
How does the sequential turn signal work on the LUXX-Series Tesla Model S tail lights? The AlphaRex LUXX-Series uses an amber sequential turn signal that sweeps across the housing in a smooth, fluid motion rather than flashing all at once. On a vehicle like the Model S, where the rear lighting spans the full width of the car, the sweeping effect is particularly noticeable and more attention-grabbing than a conventional static flash. It runs on the factory turn signal circuit with no additional wiring required.
Can condensation form inside these tail lights, and how is it managed? Yes, condensation is a risk in any sealed lighting housing. Temperature changes cause moisture inside the housing cavity to cool and collect on the lens interior, regardless of how well the housing is sealed. The AlphaRex LUXX-Series addresses this with Nitto Denko TEMISH CAPSEAL Air Breather vents integrated into the housing. These vents allow air to move in and out naturally so moisture can escape before it accumulates, rather than being trapped inside a fully sealed cavity.
What are the tail light housing and lenses made from? The housing is polypropylene (PP), a material that resists heat and moisture across a range of climates and driving conditions. The lenses are polycarbonate with two coatings applied: an anti-fog coating to reduce internal fogging in variable weather, and a UV-resistant coating to slow yellowing and oxidation so the lenses stay clearer over time.
Is installation plug-and-play on the Tesla Model S? Yes. The AlphaRex LUXX-Series Black-Red tail lights connect directly to the factory wiring harness with no modifications needed. Installation instructions are included in the box. As with any lighting modification on a Tesla, confirming compatibility with the vehicle’s software and electrical system before installation is a reasonable precaution, since Tesla vehicles can flag non-OEM components through onboard diagnostics.

About AlphaRex

AlphaRex has emerged as a leader in the automotive lighting industry, driven by a relentless commitment to innovation and quality. Since its founding in June 2018, the company has grown from a small operation to an industry-renowned brand, overcoming challenges and seizing opportunities along the way. This dedication to technological advancement is matched by a steadfast commitment to regulatory compliance and industry standards, ensuring that every product not only meets but surpasses expectations.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

AlphaRex LUXX-Series LED Tail Lights Black-Red (With Black Trunk Center Piece Replacement) for MS Tesla Model S [BTL-TSS12-SA-YR-LB-21CVT/BTL-TSS12-SA-YR-LB]

Guaranteed Safe Checkout

AlphaRex LUXX-Series LED Tail Lights Black-Red (With Black Trunk Center Piece Replacement) for MS Tesla Model S

Light Features

Breathing Vents

Housing

Lens

Features

What’s Included

Applications

Frequently Asked Questions

About AlphaRex

Reviews