What vehicles are these canards compatible with?

The ADRO Prepreg Front Bumper Canards are compatible with the 2020 to 2026 Toyota GR Supra 2.0, the 2020 to 2026 GR Supra 3.0, the 2020 to 2026 GR Supra 3.0 Premium, the 2023 and newer GR Supra A91-MT Edition, the 2022 and newer GR Supra A91-CF Edition, the 2021 and newer GR Supra A91 Edition, and the 2020 and newer GR Supra 3.0 Premium Launch Edition. The ADRO Facelift Front Bumper and V2 Front Lip are required.

Do these canards require the ADRO facelift bumper and V2 lip?

Yes. The canards are designed specifically for the ADRO GR Supra Facelift Front Bumper and are only compatible when paired with the V2 Front Lip. They are not compatible with the ADRO V1 Front Lip or the factory Toyota GR Supra bumper. Both the bumper and V2 lip must be fitted before the canards can be installed.

Why are the canards not compatible with the V1 front lip?

The canard geometry is developed to work with the V2 front lip configuration. The V2 lip changes the front end profile in a way that alters how the canards integrate with the overall aerodynamic system; the V1 lip does not create the same front-end geometry and the canards are not designed or validated for use with it.

How many canards are included and how do they install?

The kit includes two left-hand and two right-hand canards, supplied as a complete pair. 3M tape is included and is the recommended installation method for a seamless finish that integrates cleanly with the ADRO bumper lines. Bolt-on mounting is also available for owners who prefer a mechanical attachment.

What is prepreg carbon fiber and how is it different from standard wet carbon?

Prepreg carbon fiber, also known as dry carbon, is manufactured by pre-impregnating the carbon weave with resin at precise ratios before the component is cured under controlled heat and pressure. This process produces a component that is lighter, stronger, and dimensionally more consistent than wet-laid carbon fiber, where resin is applied manually and the distribution is harder to control. The reduced resin content of prepreg construction also delivers a meaningful weight reduction compared to conventional carbon fiber; a difference that is immediately apparent when handling the parts. The surface finish reflects the precision of the manufacturing process.

What downforce performance does the ADRO front aero program deliver?

The V1 front lip paired with ADRO's full front aero kit produced a documented 970% increase in downforce at a minimal drag penalty at 180 kph. The V2 front lip and these canards together are developed to push beyond that figure. Specific V2 downforce data is not provided in the source material, but the canards are a functional aerodynamic component within an engineered system rather than a cosmetic addition.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

ADRO Carbon Front Canards for A90 / A91 Toyota GR Supra

The V2 front lip is the next iteration of what ADRO has been developing for the GR Supra front aero program. Where the V1 established the foundation, the V2 extends it; more front overhang increases the aerodynamic surface area at the leading edge, the bolder silhouette adds visual presence that matches the aggressive character of the ADRO facelift bumper it is built for, and the overall form reflects the direction ADRO owners have been requesting since the original lip launched. The V2 is developed to work alongside the ADRO GR Supra Prepreg Front Bumper Canards as the complete front aero package. The documented performance context behind this pairing is significant; the original V1 lip with the full ADRO front aero kit produced a 970% increase in downforce at a minimal drag penalty at 180 kph. The V2 and canards together are developed to push beyond that. For a track-focused GR Supra build, the ADRO front aero system is not cosmetic; it is an engineered aerodynamic program with measurable performance results behind it.

Features

Prepreg carbon fiber construction; lighter, stronger, and more dimensionally consistent than wet-laid carbon
Precision-fitted to sit between the bumper vent and outer edge of the ADRO facelift bumper without disturbing the existing lines
Part of the ADRO front aero program; V2 lip and canards developed to exceed the 970% downforce increase achieved with V1 kit at 180 kph
Sold as a complete pair: 2x left-hand and 2x right-hand canards
3M tape included in the box

Applications

Toyota GR Supra: A90, A91 | 2020-present

ADRO Toyota GR Supra V2 Collection

Notes

Not Compatible with V1 Front Lip
Compatible with V2 Front Bumper & Lip only
Professional installation is highly recommended

Frequently Asked Questions

What vehicles are these canards compatible with? The ADRO Prepreg Front Bumper Canards are compatible with the 2020 to 2026 Toyota GR Supra 2.0, the 2020 to 2026 GR Supra 3.0, the 2020 to 2026 GR Supra 3.0 Premium, the 2023 and newer GR Supra A91-MT Edition, the 2022 and newer GR Supra A91-CF Edition, the 2021 and newer GR Supra A91 Edition, and the 2020 and newer GR Supra 3.0 Premium Launch Edition. The ADRO Facelift Front Bumper and V2 Front Lip are required.
Do these canards require the ADRO facelift bumper and V2 lip? Yes. The canards are designed specifically for the ADRO GR Supra Facelift Front Bumper and are only compatible when paired with the V2 Front Lip. They are not compatible with the ADRO V1 Front Lip or the factory Toyota GR Supra bumper. Both the bumper and V2 lip must be fitted before the canards can be installed.
Why are the canards not compatible with the V1 front lip? The canard geometry is developed to work with the V2 front lip configuration. The V2 lip changes the front end profile in a way that alters how the canards integrate with the overall aerodynamic system; the V1 lip does not create the same front-end geometry and the canards are not designed or validated for use with it.
How many canards are included and how do they install? The kit includes two left-hand and two right-hand canards, supplied as a complete pair. 3M tape is included and is the recommended installation method for a seamless finish that integrates cleanly with the ADRO bumper lines. Bolt-on mounting is also available for owners who prefer a mechanical attachment.
What is prepreg carbon fiber and how is it different from standard wet carbon? Prepreg carbon fiber, also known as dry carbon, is manufactured by pre-impregnating the carbon weave with resin at precise ratios before the component is cured under controlled heat and pressure. This process produces a component that is lighter, stronger, and dimensionally more consistent than wet-laid carbon fiber, where resin is applied manually and the distribution is harder to control. The reduced resin content of prepreg construction also delivers a meaningful weight reduction compared to conventional carbon fiber; a difference that is immediately apparent when handling the parts. The surface finish reflects the precision of the manufacturing process.
What downforce performance does the ADRO front aero program deliver? The V1 front lip paired with ADRO’s full front aero kit produced a documented 970% increase in downforce at a minimal drag penalty at 180 kph. The V2 front lip and these canards together are developed to push beyond that figure. Specific V2 downforce data is not provided in the source material, but the canards are a functional aerodynamic component within an engineered system rather than a cosmetic addition.

About ADRO

Founded in 2020, Aerodynamic Development Race Optimization (ADRO) is dedicated to delivering premium aerodynamic body kits. The company was born from the shared passion for racing of its co-founders, CEO Dongwan Yoo and CTO Sean Yoon, who connected through a mutual friend in 2010 and bonded over their love for race cars. Over several years, they perfected their craft by creating custom body kits for KDMs as a hobby. As demand for their work grew, they established ADRO to expand their offerings. ADRO’s high-quality products are designed in California and meticulously manufactured in South Korea.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

ADRO Carbon Front Canards for A90 / A91 Toyota GR Supra [A18A20-1601]

Guaranteed Safe Checkout

ADRO Carbon Front Canards for A90 / A91 Toyota GR Supra

Features

Applications

ADRO Toyota GR Supra V2 Collection

Notes

Frequently Asked Questions

About ADRO

Reviews