What are the 7Design Intakes for LB634 Lamborghini Temerario made from?

The ARIA Intakes for LB634 Lamborghini Temerario are laid up from pre-preg carbon fiber against tooling made by 7Design and built in the USA. Twill carbon is the standard finish, with forged carbon and tinted twill carbon offered as paid options. All three share the same structural layup, so the finish is chosen on surface character.

Do the side engine intakes add power?

7Design has published no power figure for the ARIA intakes, so none is quoted here. The pieces are shaped to accelerate air on its way to the twin-turbo V8 in the Temerario and to sharpen the side profile; any change in output would depend on the rest of the intake and exhaust package on the car and has not been measured by the maker.

Are the intakes sold as a pair?

Yes. They are supplied as a set covering both sides of the vehicle, because the intakes are handed and work as a matched pair on the left and right quarter panels. One order covers the complete installation rather than a single side.

Which Lamborghini Temerario do the side engine intakes fit?

They fit the LB634 Lamborghini Temerario from 2025 onward, the 4.0L twin-turbo V8 hybrid car. The pieces were drawn around that chassis and no other Lamborghini model is covered. A Temerario already carrying side aero from another maker should be confirmed with the team before ordering.

How difficult is installation?

Level-2 install difficulty. The intakes locate on the Temerario factory intake surrounds and need no cutting or drilling, though a shop used to fitting carbon on exotics will set the edges flush first time. Hardware, finishing and final alignment sit with the installing shop rather than shipping preset.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

7Design ARIA Carbon Fiber Side Engine Intakes for LB634 Lamborghini Temerario

7Design’s ARIA Carbon Fiber Side Engine Intakes for LB634 Lamborghini accelerate air toward the Temerario’s twin-turbo V8, and they sharpen the car’s side profile in the process. Lightweight carbon replaces the factory treatment with something more technical to look at, a set of surfaces that read as engineering rather than trim, and the pieces sit against Lamborghini’s own lines instead of competing with them. Laid up in pre-preg carbon over 7Design’s tooling and built in the USA, in twill, forged or tinted finish. Sold as a set for both sides, for the owner who reads a car from the quarter panel first.

Design and Performance

The intakes occupy the flanks just behind the doors, where the Temerario draws air for its 4.0L twin-turbo V8, and 7Design shaped them to speed that air up on its way in rather than simply to dress the opening. The visual gain is a harder, more technical quarter panel: carbon surfaces with a clear direction to them, which changes how the car reads from the side far more than the size of the pieces suggests. They are the least expensive ARIA component and one of the most visible, which is why they rarely stay in the considering column for long. Fitted, the ARIA Intakes for LB634 Lamborghini Temerario alter the quarter panel far more than their footprint suggests.

Features

Accelerates air toward the 4.0L twin-turbo V8’s side intakes
Sharpens the quarter panel with directional carbon surfacing
Lightweight pre-preg carbon fiber laid over 7Design’s own tooling
Locates on the factory intake surround with no bodywork modification required
Twill carbon standard, with forged carbon and tinted twill carbon optional
Built in the USA

Applications

Lamborghini Temerario: LB634 | 2025-present | 4.0L Twin-Turbo V8 Hybrid

Notes

Sold as a set covering both sides of the vehicle
Offered in twill carbon fiber as standard, with forged carbon and tinted twill carbon available as options (both priced above the standard twill finish)
Each ARIA component is laid up to order in the USA, so it is listed on backorder and the team confirms build time at the point of order
Developed in computational fluid dynamics and fitted to the factory mounting points, with no bodywork modification required
The ARIA Intakes for LB634 Lamborghini Temerario are one of eighteen pieces in the program; the complete kit is the 7Design ARIA Carbon Fiber Body Kit

Frequently Asked Questions

What are the 7Design Intakes for LB634 Lamborghini Temerario made from? The ARIA Intakes for LB634 Lamborghini Temerario are laid up from pre-preg carbon fiber against tooling made by 7Design and built in the USA. Twill carbon is the standard finish, with forged carbon and tinted twill carbon offered as paid options. All three share the same structural layup, so the finish is chosen on surface character.
Do the side engine intakes add power? 7Design has published no power figure for the ARIA intakes, so none is quoted here. The pieces are shaped to accelerate air on its way to the twin-turbo V8 in the Temerario and to sharpen the side profile; any change in output would depend on the rest of the intake and exhaust package on the car and has not been measured by the maker.
Are the intakes sold as a pair? Yes. They are supplied as a set covering both sides of the vehicle, because the intakes are handed and work as a matched pair on the left and right quarter panels. One order covers the complete installation rather than a single side.
Which Lamborghini Temerario do the side engine intakes fit? They fit the LB634 Lamborghini Temerario from 2025 onward, the 4.0L twin-turbo V8 hybrid car. The pieces were drawn around that chassis and no other Lamborghini model is covered. A Temerario already carrying side aero from another maker should be confirmed with the team before ordering.
How difficult is installation? Level-2 install difficulty. The intakes locate on the Temerario factory intake surrounds and need no cutting or drilling, though a shop used to fitting carbon on exotics will set the edges flush first time. Hardware, finishing and final alignment sit with the installing shop rather than shipping preset.

About 7Design

7Design is a design house based in New York that fuses carbon, art and performance for a short list of the world’s most desirable cars. Every ARIA component begins as a digital model refined over thousands of hours, with proportions, aerodynamic validation and panel integration settled before a mold is cut. Development runs in computational fluid dynamics, so the aero surfaces do measurable work rather than merely suggesting it, and every piece is built in the USA from the finest carbon fiber the firm can source. Twill, forged and tinted carbon are offered across the range, each treated as a considered choice rather than an afterthought.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.