Do these Öhlins Road & Track coilovers fit the Mitsubishi Lancer Evo 10?

Yes. The Öhlins Road & Track coilovers are designed specifically for the Mitsubishi Lancer Evo 10. Contact Bulletproof Automotive before ordering to confirm fitment for your specific build, trim level, or regional variant.

How does the DFV adjustment work on the Evo 10 coilover kit?

The Dual Flow Valve (DFV) uses a single gold knob on each damper. Turning it clockwise engages race mode, adjusting low-speed compression, high-speed compression, low-speed rebound, and high-speed rebound all at once. Turning it back returns the damper to road mode. No tools are required for the adjustment.

What is the ride height adjustment range for these coilovers?

Both the front and rear dampers offer approximately 10 to 35 mm of lowering adjustment. Each corner uses a separate damper length adjuster alongside a spring preload adjuster, so ride height and spring load can be set independently of one another.

Do the front top mounts include camber adjustment?

Yes. The front aluminum ball joint top mounts include adjustable camber, allowing front geometry to be dialed in to suit specific alignment targets or driving setups. The rear aluminum ball joint top mounts are fixed rather than adjustable.

What are the spring rates on the Öhlins Evo 10 coilover kit?

The front spring rate is 100 N/mm and the rear spring rate is 80 N/mm. The stiffer front rate supports the Evo 10's front-heavy weight distribution and keeps the front axle composed under the high cornering and braking loads the car generates on track.

Are these Öhlins coilovers TÜV approved?

Yes. The Öhlins Road & Track coilovers for Mitsubishi Lancer Evo 10 carry TÜV approval, confirming they meet the technical and safety standards required for road use in TÜV-regulated markets.

Can these dampers be rebuilt after extended track use?

Yes. Every damper in the Öhlins Road & Track kit for Mitsubishi Lancer Evo 10 is fully rebuildable. This allows for servicing after heavy use and makes custom tuning possible for drivers who want to optimize the setup for a specific track or driving style.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Öhlins DFV Road & Track Coilovers for CZ4A Mitsubishi EVO X

The Öhlins Road & Track coilovers for Mitsubishi Lancer Evo 10 are built for a car with genuine rally heritage and a chassis engineered to perform at the limit. The Evo 10 arrived from the factory with all-wheel drive, active yaw control, and suspension geometry developed through decades of competitive motorsport; this kit gives that foundation the damping capability it deserves, delivering race-grade control on track without giving up the usability that made the Evo 10 one of the most capable all-weather performance cars ever produced.

How the DFV System Works

Öhlins’ Dual Flow Valve (DFV) technology handles the transition between road and race damping with a single adjustment. Turning the gold knob clockwise engages race mode across all four damping zones at once: low-speed compression, high-speed compression, low-speed rebound, and high-speed rebound. Reverse it and the damper returns to a relaxed road setting. No tools, no separate adjustments per corner. On track, the DFV internals respond quickly to surface changes, keeping all four tires loaded through corners and stable under hard braking. The Evo 10’s all-wheel-drive platform and active differentials already manage traction with precision; this kit gives the chassis the damping support to make the most of all that capability at the limit and keep the car balanced and predictable when you’re pushing it hard. Off track, the same system softens its response and filters road imperfections without the harshness that typically comes with a 100N/mm front spring rate.

Suspension Specs and Adjustment Range

The front uses McPherson strut monotube upside-down technology, positioning the damper mass lower in the assembly to reduce unsprung weight and sharpen response. The front includes a spring preload adjuster and a separate damper length adjuster, with approximately 10 to 35mm of lowering adjustment and a 100N/mm spring rate. The front aluminum ball joint top mounts include adjustable camber, giving you the ability to dial in front geometry to suit your alignment targets and driving style. The rear uses an aluminum monotube shock absorber with a spring preload adjuster, a separate damper length adjuster, approximately 10 to 35mm of lowering adjustment, and an 80N/mm spring rate. The rear aluminum ball joint top mounts are fixed rather than adjustable. Both ends use a single adjuster covering compression and rebound damping together, keeping the setup process straightforward without sacrificing meaningful adjustability. The 1-way 25-click range gives enough resolution to shift the character of the car meaningfully between road and track use.

Features

DFV technology (Dual Flow Valve)
Broad, 20-click damping adjustment
Individual height adjustment
Rebuildable dampers for custom tuning
Corrosion salt spray tested (ISO 9227)
2-year warranty
TÜV approved

Specifications

Front
- McPherson strut, monotube upside-down technology
- Spring preload adjuster
- Separate damper length adjuster
- Approximately 10-35mm lowering adjustment range
- 100N/mm spring rate
- Aluminum ball joint top mounts with adjustable camber

Rear
- Aluminum monotube shock absorber
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Separate damper length adjuster
- Approximately 10-35mm lowering adjustment range
- 80N/mm spring rate

Applications

Mitsubishi Lancer Evolution X: CZ4A | 2007-2015

Notes

Image(s) may differ from actual product

Frequently Asked Questions

Do these Öhlins Road & Track coilovers fit the Mitsubishi Lancer Evo 10? Yes. The Öhlins Road & Track coilovers are designed specifically for the Mitsubishi Lancer Evo 10. Contact Bulletproof Automotive before ordering to confirm fitment for your specific build, trim level, or regional variant.
How does the DFV adjustment work on the Evo 10 coilover kit? The Dual Flow Valve (DFV) uses a single gold knob on each damper. Turning it clockwise engages race mode, adjusting low-speed compression, high-speed compression, low-speed rebound, and high-speed rebound all at once. Turning it back returns the damper to road mode. No tools are required for the adjustment.
What is the ride height adjustment range for these coilovers? Both the front and rear dampers offer approximately 10 to 35mm of lowering adjustment. Each corner uses a separate damper length adjuster alongside a spring preload adjuster, so ride height and spring load can be set independently of one another.
Do the front top mounts include camber adjustment? Yes. The front aluminum ball joint top mounts include adjustable camber, allowing front geometry to be dialed in to suit specific alignment targets or driving setups. The rear aluminum ball joint top mounts are fixed rather than adjustable.
What are the spring rates on the Öhlins Evo 10 coilover kit? The front spring rate is 100N/mm and the rear spring rate is 80N/mm. The stiffer front rate supports the Evo 10’s front-heavy weight distribution and keeps the front axle composed under the high cornering and braking loads the car generates on track.
Are these Öhlins coilovers TÜV approved? Yes. The Öhlins Road & Track coilovers for Mitsubishi Lancer Evo 10 carry TÜV approval, confirming they meet the technical and safety standards required for road use in TÜV-regulated markets.
Can these dampers be rebuilt after extended track use? Yes. Every damper in the Öhlins Road & Track kit for Mitsubishi Lancer Evo 10 is fully rebuildable. This allows for servicing after heavy use and makes custom tuning possible for drivers who want to optimize the setup for a specific track or driving style.

About Ohlins

For nearly 50 years, Öhlins has been a cornerstone of the motorsport, motorcycle, and automotive industries, guided by a clear mission to deliver uncompromising quality in products, service, and support from the MotoGP circuit to grassroots racing events in over 50 distributing countries. Trusted by aftermarket customers, OEM partners, and professional racing teams, the company designs and manufactures advanced suspension systems that push the limits of precision, control, and reliability. Rooted in a rich motorsport heritage and driven by a passion for innovation, Öhlins extends beyond its racing DNA to inspire riders and drivers everywhere with high-performance solutions that are rigorously developed, tested, and refined to transform vehicle dynamics. Through close collaboration with leading manufacturers and racing teams, the company sets the benchmark for suspension performance, integrating insights directly into its shock absorbers, front forks, steering dampers, and advanced electronic suspension systems for both OEM and aftermarket applications. Its products deliver track-proven performance with minimal modification, enabling professional competitors, enthusiasts, and everyday drivers to achieve greater comfort, control, and confidence.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Ohlins DFV Road & Track Coilovers for CZ4A Mitsubishi EVO X [MIS Mi10S1]

Guaranteed Safe Checkout