Are the BILSTEIN EVO R Coilovers for G20 cars meant for the street?

EVO R is the BILSTEIN motorsport line, built for track and competition use with 2-way adjustable dampers and a Limited 90-Day Warranty. For a road car, the EVO S, EVO T1 or EVO SE kits for the G20 and G22 are better suited, and Bulletproof Automotive stocks those too.

How much does the kit lower the G20, G22, G42, G29 and A90?

BILSTEIN quotes up to 70mm of lowering at the front on the 2, 3 and 4 Series, with 20mm to 70mm at the rear on rear-drive cars and 20mm to 60mm on xDrive cars, 10mm to 30mm on the Z4 and 30mm to 50mm on the GR Supra. The EVO R Coilovers for G20 cars set height on threaded bodies.

What are the EVO R adjusters for?

EVO R dampers for the G20, G22, G42, G29 and A90 have separate rebound and compression adjusters, giving 100 combinations. That lets a driver or race engineer tune the G20 3 Series for a particular circuit, tire and setup rather than living with one compromise, and BILSTEIN hand builds each EVO R kit for its application.

Does the kit need a wheel alignment afterwards?

Yes. Any change to ride height alters camber and toe, so the G20, G22, G42, G29 and A90 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the EVO R kit with its Limited 90-Day Warranty, and any claim for the G20, G22, G42, G29 and A90 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra

BILSTEIN’s EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra are BILSTEIN’s motorsport kit for the current BMW rear-drive and xDrive platform, including the G42 230i and the M340i and M440i. Hand built in Germany, each damper has independent rebound and compression adjustment, and the threaded bodies allow up to 70mm of lowering.

Design and Performance

EVO R uses red springs on grey monotube dampers. BILSTEIN backs it with a Limited 90-Day Warranty, consistent with a kit built for track use rather than daily driving.

Features

2-way adjustable dampers for the G20 3 Series, with independent rebound and compression control and 100 combinations
Height-adjustable monotube dampers with threaded bodies for setting the stance of the G20 3 Series
N/A springs finished in red, with rates matched to the front and rear axle loads of the G20 3 Series
BILSTEIN Limited 90-Day Warranty, with the EVO R Coilovers for G20 made in Germany

Specifications

Damping adjustment: 2-way, independent rebound and compression, 100 combinations
Damper design: Monotube
Front lowering: 30-70mm or 10-30mm or 30-50mm, by model
Rear lowering: 20-70mm or 20-60mm or 10-30mm or 30-50mm, by model
Finish: Grey dampers, red springs
Country of origin: Germany
Warranty: BILSTEIN Limited 90-Day Warranty

Applications

BMW 2 Series: G42 | 2022-2024
BMW 3 Series: G20 | 2019-2024
BMW 4 Series: G22 | 2020-2025
BMW Z4: G29 | 2020-2026
Toyota GR Supra: A90 | 2020-2026

Notes

BILSTEIN lists the kit for cars without electronic suspension
For road use, see the EVO T1 Coilovers for G20 and the EVO S Coilovers for G20
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Are the BILSTEIN EVO R Coilovers for G20 cars meant for the street? EVO R is the BILSTEIN motorsport line, built for track and competition use with 2-way adjustable dampers and a Limited 90-Day Warranty. For a road car, the EVO S, EVO T1 or EVO SE kits for the G20 and G22 are better suited, and Bulletproof Automotive stocks those too.
How much does the kit lower the G20, G22, G42, G29 and A90? BILSTEIN quotes up to 70mm of lowering at the front on the 2, 3 and 4 Series, with 20mm to 70mm at the rear on rear-drive cars and 20mm to 60mm on xDrive cars, 10mm to 30mm on the Z4 and 30mm to 50mm on the GR Supra. The EVO R Coilovers for G20 cars set height on threaded bodies.
What are the EVO R adjusters for? EVO R dampers for the G20, G22, G42, G29 and A90 have separate rebound and compression adjusters, giving 100 combinations. That lets a driver or race engineer tune the G20 3 Series for a particular circuit, tire and setup rather than living with one compromise, and BILSTEIN hand builds each EVO R kit for its application.
Does the kit need a wheel alignment afterwards? Yes. Any change to ride height alters camber and toe, so the G20, G22, G42, G29 and A90 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the EVO R kit with its Limited 90-Day Warranty, and any claim for the G20, G22, G42, G29 and A90 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra [89-312780]

Guaranteed Safe Checkout

BILSTEIN EVO R Coilovers for G20 BMW 3 Series, G22 4 Series, G29 Z4 and A90 Toyota GR Supra

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews