Do the BILSTEIN EVO S Coilovers for G20 fit the M440i?

Yes. BILSTEIN lists the rear-drive M440i from 2021 to 2025 alongside the 330i, 430i and the 2020 to 2022 M340i, all without electronic suspension. xDrive cars use a separate EVO S kit with different front hardware, which Bulletproof Automotive also stocks.

How much lower will the rear-drive G20 and G22 sit?

BILSTEIN quotes lowering of 35mm to 50mm at the front and 30mm to 55mm at the rear on the 330i, 430i and M440i, and 20mm to 35mm at the front and 15mm to 40mm at the rear on the M340i. On the G20 3 Series, the threaded bodies set the exact height inside that range. The EVO S Coilovers for G20 are rated for axle loads up to 1,115kg front and 1,325kg rear.

What is the difference between EVO S and EVO T1?

For the rear-drive G20 and G22, both are threaded, height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping chosen by BILSTEIN for everyday street use, while EVO T1 adds a 10-stage damping adjuster for owners who also take the G20 3 Series to the track. For a G20 3 Series that only needs a lower, tighter stance on the road, EVO S is the simpler choice.

Does the kit need a wheel alignment afterwards?

Yes. Any change to ride height alters camber and toe, so the rear-drive G20 and G22 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the EVO S kit with its Limited 5-Year Warranty, and any claim for the rear-drive G20 and G22 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series

BILSTEIN’s EVO S Coilovers for G20 BMW 3 Series and G22 4 Series fit the rear-drive 330i, 430i and M440i through 2025 and the M340i of 2020 to 2022, on cars without adaptive dampers. It is the simplest EVO kit: threaded, height-adjustable dampers with fixed valving that BILSTEIN sets for each car, for an owner who wants a better stance and a tighter road car.

Design and Performance

Springs run 405 lbs/in front and 756 lbs/in rear, both progressive. BILSTEIN gives the M340i a smaller front drop, 20mm to 35mm, than the 330i, 430i and M440i.

Features

Fixed damping valving chosen by BILSTEIN for the G20 3 Series, with nothing to set or forget
Height-adjustable monotube and twintube dampers with threaded bodies for setting the stance of the G20 3 Series
Springs and dampers tuned as a pair for the G20 3 Series, with progressive spring rates and a black finish
Built in Germany, the EVO S Coilovers for G20 are backed by the BILSTEIN Limited 5-Year Warranty

Specifications

Damping adjustment: Fixed, valved by BILSTEIN for the application
Damper design: Monotube and twintube
Front spring rate: 405 lbs/in, progressive
Rear spring rate: 756 lbs/in, progressive
Front lowering: 35-50mm or 20-35mm, by model
Rear lowering: 30-55mm or 15-40mm, by model
Maximum axle load: Up to 1,115kg front, 1,325kg rear, by model
Finish: Grey dampers, black springs
Country of origin: Germany
Warranty: BILSTEIN Limited 5-Year Warranty

Applications

BMW 3 Series: G20 (330i 2019-2025, M340i 2020-2022) | 2019-2025
BMW 4 Series: G22 (430i 2021-2025, M440i 2021-2025) | 2021-2025

Notes

BILSTEIN lists the kit for cars without electronic suspension
For xDrive cars, BILSTEIN makes the EVO S Coilovers for G20 xDrive
BILSTEIN specifies its coilover spanner wrench for setting the spring seats and lock rings on this kit
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Do the BILSTEIN EVO S Coilovers for G20 fit the M440i? Yes. BILSTEIN lists the rear-drive M440i from 2021 to 2025 alongside the 330i, 430i and the 2020 to 2022 M340i, all without electronic suspension. xDrive cars use a separate EVO S kit with different front hardware, which Bulletproof Automotive also stocks.
How much lower will the rear-drive G20 and G22 sit? BILSTEIN quotes lowering of 35mm to 50mm at the front and 30mm to 55mm at the rear on the 330i, 430i and M440i, and 20mm to 35mm at the front and 15mm to 40mm at the rear on the M340i. On the G20 3 Series, the threaded bodies set the exact height inside that range. The EVO S Coilovers for G20 are rated for axle loads up to 1,115kg front and 1,325kg rear.
What is the difference between EVO S and EVO T1? For the rear-drive G20 and G22, both are threaded, height-adjustable BILSTEIN EVO coilover kits. EVO S has fixed damping chosen by BILSTEIN for everyday street use, while EVO T1 adds a 10-stage damping adjuster for owners who also take the G20 3 Series to the track. For a G20 3 Series that only needs a lower, tighter stance on the road, EVO S is the simpler choice.
Does the kit need a wheel alignment afterwards? Yes. Any change to ride height alters camber and toe, so the rear-drive G20 and G22 needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the G20 3 Series before the alignment, so it is only paid for once.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the EVO S kit with its Limited 5-Year Warranty, and any claim for the rear-drive G20 and G22 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the G20 3 Series is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series [47-300118]

Guaranteed Safe Checkout

BILSTEIN EVO S Coilovers for G20 BMW 3 Series and G22 4 Series

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews