Is any modification needed to fit the BILSTEIN B16 DampTronic Coilovers for C117 cars?

Yes. BILSTEIN states that the existing wiring harness has to be modified to install this kit. The work connects the BILSTEIN dampers to the factory damping control and is best done by a shop familiar with Mercedes-Benz electrical work, followed by a wheel alignment.

What ride height range does the kit give the C117 CLA with adaptive damping?

For the C117 CLA with adaptive damping, BILSTEIN quotes lowering of 25mm to 45mm front and rear compared with the factory ride height. The B16 DampTronic Coilovers for C117 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the C117 CLA can run in practice.

How is B16 DampTronic different from B16 PSS10?

B16 PSS10 uses a manual 10-click adjuster and suits a C117 CLA built without electronic dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the C117 CLA with adaptive damping; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the C117 CLA keeps managing the dampers.

Which CLA models does the kit fit?

BILSTEIN lists the CLA250 and CLA250 4MATIC from 2014 to 2019 and the AMG CLA 45 4MATIC over the same years, each with electronic suspension. CLA models without electronic damping take the manual-adjust B16 PSS10 kit, which Bulletproof Automotive also stocks.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the C117 CLA with adaptive damping goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the C117 CLA is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA

BILSTEIN’s B16 DampTronic Coilovers for C117 Mercedes-Benz CLA fit the 2014 to 2019 CLA250, front-drive and 4MATIC, and the AMG CLA 45 4MATIC, on cars built with electronic damping. The kit keeps the factory damper control working through the drive-mode selector and lowers the car 25mm to 45mm at each end on threaded bodies.

Design and Performance

Linear springs at 314 lbs/in front and 340 lbs/in rear sit on zinc-plated front and yellow rear dampers.

Features

Works with the factory electronic suspension of the C117 CLA, retaining its controls and active functions
Monotube dampers in zinc-coated threaded bodies, so the C117 CLA ride height is set on the car and the bodies resist road salt
Linear springs in blue, rated by BILSTEIN for the weight on each axle of the C117 CLA
The B16 DampTronic Coilovers for C117 are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty

Specifications

Damping adjustment: Electronic, through the factory damping control
Damper design: Monotube
Front spring rate: 314 lbs/in, linear
Rear spring rate: 340 lbs/in, linear
Front lowering: 25-45mm
Rear lowering: 25-45mm
Finish: Zinc front, yellow rear dampers, blue springs
Country of origin: Germany
Warranty: BILSTEIN Limited 5-Year Warranty

Applications

Mercedes-AMG CLA 45: C117 | 2014-2019
Mercedes-Benz CLA-Class: C117 (including CLA250 4Matic and CLA250) | 2014-2019

Notes

BILSTEIN states that modification to the existing wiring harness is required
For cars without electronic damping, BILSTEIN makes the B16 PSS10 Coilovers for C117 CLA
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Is any modification needed to fit the BILSTEIN B16 DampTronic Coilovers for C117 cars? Yes. BILSTEIN states that the existing wiring harness has to be modified to install this kit. The work connects the BILSTEIN dampers to the factory damping control and is best done by a shop familiar with Mercedes-Benz electrical work, followed by a wheel alignment.
What ride height range does the kit give the C117 CLA with adaptive damping? For the C117 CLA with adaptive damping, BILSTEIN quotes lowering of 25mm to 45mm front and rear compared with the factory ride height. The B16 DampTronic Coilovers for C117 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the C117 CLA can run in practice.
How is B16 DampTronic different from B16 PSS10? B16 PSS10 uses a manual 10-click adjuster and suits a C117 CLA built without electronic dampers. B16 DampTronic is the version for cars that left the factory with electronic damping, such as the C117 CLA with adaptive damping; it adds threaded height adjustment and BILSTEIN springs while the original control unit of the C117 CLA keeps managing the dampers.
Which CLA models does the kit fit? BILSTEIN lists the CLA250 and CLA250 4MATIC from 2014 to 2019 and the AMG CLA 45 4MATIC over the same years, each with electronic suspension. CLA models without electronic damping take the manual-adjust B16 PSS10 kit, which Bulletproof Automotive also stocks.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the B16 DampTronic kit with its Limited 5-Year Warranty, and any claim for the C117 CLA with adaptive damping goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the C117 CLA is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA [49-265262]

Guaranteed Safe Checkout

BILSTEIN B16 DampTronic Coilovers for C117 Mercedes-Benz CLA

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews