Does the BILSTEIN B12 Pro-Kit for 997 Carrera 4 fit cars with PASM?

No. BILSTEIN lists this kit for the all-wheel-drive 997 without PASM, Porsche Active Suspension Management. For PASM cars, including the Turbo, BILSTEIN makes a separate B12 Pro-Kit, which Bulletproof Automotive also stocks. Check the options list or ask for a VIN check before ordering.

How much lower will the 997 Carrera 4 sit?

For the 997 Carrera 4, BILSTEIN quotes lowering of 20mm front and rear compared with the factory ride height. The springs set that height on the 997 Carrera 4, so it stays fixed once installed. The B12 Pro-Kit for 997 is rated for axle loads up to 825kg front and 1,250kg rear.

Why replace the dampers when lowering the 997 Carrera 4?

The factory dampers on the 997 Carrera 4 are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the 997 Carrera 4 underdamped and shorten damper life. BILSTEIN tunes the B12 dampers for the Eibach springs in this 997 Carrera 4 kit, so both suit the lower ride height.

Does the kit need a wheel alignment?

Yes. Lowering changes camber and toe, so the 997 Carrera 4 needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the 997 Carrera 4 is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the 997 Carrera 4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 997 Carrera 4 is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM

BILSTEIN’s B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM fits the all-wheel-drive 997 on conventional dampers: the Carrera 4 from 2006 to 2012, the Targa 4 from 2007 to 2012, and the 2008 Carrera 4S and Targa 4S. BILSTEIN dampers and Eibach Pro-Kit springs lower the car 20mm at each end.

Design and Performance

Because the kit replaces conventional dampers, there is no electronic system to consider; the springs fix the height and BILSTEIN sets the valving to match.

Features

BILSTEIN performance dampers paired with Eibach Pro-Kit lowering springs for the 997 Carrera 4
Valving set by BILSTEIN to control the lower spring, so the 997 Carrera 4 is not left underdamped
Fixed ride height on the 997 Carrera 4, with no threaded bodies or adjusters to set or maintain
The B12 Pro-Kit for 997 is made in Germany and covered by the BILSTEIN Limited Lifetime Warranty

Specifications

Damper design: Monotube
Front lowering: 20mm
Rear lowering: 20mm
Maximum axle load: 825kg front, 1,250kg rear
Finish: Yellow dampers, dark grey springs
Country of origin: Germany
Warranty: BILSTEIN Limited Lifetime Warranty

Applications

Porsche 911: 997 (including Carrera 4, Targa 4, Carrera 4S and Targa 4S) | 2006-2012

Notes

BILSTEIN lists this kit for cars without PASM (Porsche Active Suspension Management)
For PASM cars and the Turbo, BILSTEIN makes the B12 Pro-Kit for 997 Carrera 4 and Turbo with PASM
This is a fixed-height kit; ride height and damping are not adjustable
The images show a representative BILSTEIN B12 Pro-Kit kit; mounts, brackets and springs differ by vehicle
A wheel alignment is needed after installation

Frequently Asked Questions

Does the BILSTEIN B12 Pro-Kit for 997 Carrera 4 fit cars with PASM? No. BILSTEIN lists this kit for the all-wheel-drive 997 without PASM, Porsche Active Suspension Management. For PASM cars, including the Turbo, BILSTEIN makes a separate B12 Pro-Kit, which Bulletproof Automotive also stocks. Check the options list or ask for a VIN check before ordering.
How much lower will the 997 Carrera 4 sit? For the 997 Carrera 4, BILSTEIN quotes lowering of 20mm front and rear compared with the factory ride height. The springs set that height on the 997 Carrera 4, so it stays fixed once installed. The B12 Pro-Kit for 997 is rated for axle loads up to 825kg front and 1,250kg rear.
Why replace the dampers when lowering the 997 Carrera 4? The factory dampers on the 997 Carrera 4 are valved for the factory springs. Shorter, firmer lowering springs on worn or stock dampers can leave the 997 Carrera 4 underdamped and shorten damper life. BILSTEIN tunes the B12 dampers for the Eibach springs in this 997 Carrera 4 kit, so both suit the lower ride height.
Does the kit need a wheel alignment? Yes. Lowering changes camber and toe, so the 997 Carrera 4 needs a four-wheel alignment once the new springs and dampers have settled. Because the ride height of the 997 Carrera 4 is fixed by the springs, one alignment after installation is normally all the kit asks for, unless other suspension parts change later.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the B12 Pro-Kit kit with its Limited Lifetime Warranty, and any claim for the 997 Carrera 4 goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the 997 Carrera 4 is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM [46-193773]

Guaranteed Safe Checkout

BILSTEIN B12 Pro-Kit for 997 Porsche 911 Carrera 4 without PASM

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews