Which Evolution X models do the BILSTEIN B16 PSS10 Coilovers for CZ4A fit?

BILSTEIN lists the GSR and MR for 2008 and 2010 to 2015, the MR Touring for 2010 and 2011, and the 2015 Final Edition. The 2009 model year does not appear in the BILSTEIN application list, so check a 2009 car with Bulletproof Automotive before ordering.

What ride height range does the kit give the Lancer Evolution X?

For the Lancer Evolution X, BILSTEIN quotes lowering of 40mm to 50mm at the front and 30mm to 50mm at the rear compared with the factory ride height. The B16 PSS10 Coilovers for CZ4A set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the Evo X can run in practice.

What does the 10-stage adjuster change on the Lancer Evolution X?

On the Lancer Evolution X, each click changes rebound and compression damping together, so the damper firms up or softens as a whole. BILSTEIN sets the range for the Evo X, which keeps the softest position comfortable on a broken road and gives the firmest position the control a smooth circuit asks for.

Does the kit need a wheel alignment afterwards?

Yes. Any change to ride height alters camber and toe, so the Lancer Evolution X needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Evo X before the alignment, so it is only paid for once.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Lancer Evolution X goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Evo X is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN B16 PSS10 Coilovers for CZ4A Mitsubishi Lancer Evolution X

BILSTEIN’s B16 PSS10 Coilovers for CZ4A Mitsubishi Lancer Evolution X fit the GSR, MR, MR Touring and the 2015 Final Edition that closed out the Evolution line. The Evo X is a heavier, more refined car than the Evo IX, and it responds well to damping that controls its mass. This kit pairs German monotube dampers with progressive springs and a 10-click adjuster per corner.

Design and Performance

Progressive springs at 358 lbs/in front and 343 lbs/in rear keep the Evo X compliant on broken roads. The front drop of 40mm to 50mm is the most noticeable change, closing the gap that makes a stock Evo X look tall.

Features

10 damping settings per corner of the Evo X, with rebound and compression moving together on each click
Monotube dampers in zinc-coated threaded bodies, so the Evo X ride height is set on the car and the bodies resist road salt
Progressive springs in blue, rated by BILSTEIN for the weight on each axle of the Evo X
The B16 PSS10 Coilovers for CZ4A are made in Germany and covered by the BILSTEIN Limited 5-Year Warranty

Specifications

Damping adjustment: 10 stages, rebound and compression together
Damper design: Monotube
Front spring rate: 358 lbs/in, progressive
Rear spring rate: 343 lbs/in, progressive
Front lowering: 40-50mm
Rear lowering: 30-50mm
Finish: Zinc dampers, blue springs
Country of origin: Germany
Warranty: BILSTEIN Limited 5-Year Warranty

Applications

Mitsubishi Lancer: CZ4A (including Evolution GSR, Evolution MR, Evolution MR Touring and Evolution Final Edition) | 2008 and 2010-2015

Notes

BILSTEIN does not list the 2009 model year for this kit
BILSTEIN specifies its coilover spanner wrench for setting the spring seats and lock rings on this kit
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Which Evolution X models do the BILSTEIN B16 PSS10 Coilovers for CZ4A fit? BILSTEIN lists the GSR and MR for 2008 and 2010 to 2015, the MR Touring for 2010 and 2011, and the 2015 Final Edition. The 2009 model year does not appear in the BILSTEIN application list, so check a 2009 car with Bulletproof Automotive before ordering.
What ride height range does the kit give the Lancer Evolution X? For the Lancer Evolution X, BILSTEIN quotes lowering of 40mm to 50mm at the front and 30mm to 50mm at the rear compared with the factory ride height. The B16 PSS10 Coilovers for CZ4A set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the Evo X can run in practice.
What does the 10-stage adjuster change on the Lancer Evolution X? On the Lancer Evolution X, each click changes rebound and compression damping together, so the damper firms up or softens as a whole. BILSTEIN sets the range for the Evo X, which keeps the softest position comfortable on a broken road and gives the firmest position the control a smooth circuit asks for.
Does the kit need a wheel alignment afterwards? Yes. Any change to ride height alters camber and toe, so the Lancer Evolution X needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Evo X before the alignment, so it is only paid for once.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Lancer Evolution X goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Evo X is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN B16 PSS10 Coilovers for CZ4A Mitsubishi Lancer Evolution X [48-227186]

Guaranteed Safe Checkout

BILSTEIN B16 PSS10 Coilovers for CZ4A Mitsubishi Lancer Evolution X

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews