Does the Alcon Front Race Brake Kit for AP1 S2000 fit the factory upright?

Yes. Alcon USA lists this Front Race Brake Kit for AP1 S2000 for the factory front upright on 2000-2005 cars, so no aftermarket upright is needed. Later 2006-2009 cars take a separate Alcon front race kit, and BA can confirm which suits your car.

Will the kit work with the stock S2000 ABS and master cylinder?

Yes. Alcon sizes the caliper pistons for the stock S2000 master cylinder, booster and ABS, so the kit fits without hydraulic changes and the factory stability systems keep working. The forged calipers are also compatible with aftermarket ABS systems, which matters on cars that later move to a motorsport ABS unit.

Do I need the rear kit as well?

No. The front kit works on its own with the factory rear brakes, because Alcon sizes the calipers for the stock S2000 master cylinder, booster and ABS. Alcon also offers a matching S2000 rear kit and a front and rear set for owners who want Alcon hardware at both ends of the car.

What are the rotors made from?

The rotors are two-piece assemblies: grey cast iron discs machined by Pro-System in Mooresville, North Carolina, from an iron formulated for thermal stability and consistent friction, mounted on anodized aluminum hats. The discs float on anti-rattle clips, so the iron can expand with heat without stressing the hat.

How difficult is installation on a S2000 Honda?

It is a bolt-on upgrade using the supplied brackets and hardware, with no cutting and no hydraulic changes. Brakes are safety-critical, so BA recommends a professional shop that will torque every fastener to specification, bleed the system and confirm wheel clearance before the car is driven.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Alcon Pro-System Front Race Brake Kit for AP1 Honda S2000 (2000-2005)

Alcon’s Pro-System Front Race Brake Kit for AP1 Honda S2000 (2000-2005) is the front brake for an S2000 that has moved from canyon roads to race grids. Alcon USA lists it for the factory front upright, and it pairs forged four-piston Alcon calipers with 332 x 32 mm two-piece rotors, grey cast iron discs machined by Pro-System in Mooresville, North Carolina, floating on anodized hats. Rotors and pads are dyno-bedded before shipping, and the pistons are sized for the stock master cylinder and ABS, keeping the S2000’s famously precise pedal while adding the heat capacity the factory brakes lack.

Features

Forged aluminum four-piston Alcon front calipers with stainless steel pistons
332 x 32 mm two-piece front rotors in grey cast iron, machined by Pro-System in Mooresville, North Carolina
Fully floating rotor attachment with anti-rattle clips on anodized aluminum hats
Anodized caliper finish
Staggered piston diameters and a bolted pad retainer for even pad wear and a firm pedal
Quick-change pads that come out without removing the caliper
High performance pads included and dyno-bedded to the rotors
The Front Race Brake Kit for AP1 is sold as a complete front axle set

What’s Included

Four-piston front calipers (L/R)
332 x 32 mm front rotors with aluminum hats (x2)
Caliper mounting brackets
High performance brake pads (front axle set)
Anti-rattle clips and mounting hardware

Applications

Honda S2000: AP1 | 2000-2005

Notes

Alcon USA lists this kit for the factory front upright
Turn 14 lists this part for the 2000-2005 S2000; Alcon offers a separate front race kit for 2006-2009 cars
Rear brakes are sold separately; see the S2000 rear race kit
Brakes are a safety-critical system, and BA recommends installation by a professional shop

Frequently Asked Questions

Does the Alcon Front Race Brake Kit for AP1 S2000 fit the factory upright? Yes. Alcon USA lists this Front Race Brake Kit for AP1 S2000 for the factory front upright on 2000-2005 cars, so no aftermarket upright is needed. Later 2006-2009 cars take a separate Alcon front race kit, and BA can confirm which suits your car.
Will the kit work with the stock S2000 ABS and master cylinder? Yes. Alcon sizes the caliper pistons for the stock S2000 master cylinder, booster and ABS, so the kit fits without hydraulic changes and the factory stability systems keep working. The forged calipers are also compatible with aftermarket ABS systems, which matters on cars that later move to a motorsport ABS unit.
Do I need the rear kit as well? No. The front kit works on its own with the factory rear brakes, because Alcon sizes the calipers for the stock S2000 master cylinder, booster and ABS. Alcon also offers a matching S2000 rear kit and a front and rear set for owners who want Alcon hardware at both ends of the car.
What are the rotors made from? The rotors are two-piece assemblies: grey cast iron discs machined by Pro-System in Mooresville, North Carolina, from an iron formulated for thermal stability and consistent friction, mounted on anodized aluminum hats. The discs float on anti-rattle clips, so the iron can expand with heat without stressing the hat.
How difficult is installation on a S2000 Honda? It is a bolt-on upgrade using the supplied brackets and hardware, with no cutting and no hydraulic changes. Brakes are safety-critical, so BA recommends a professional shop that will torque every fastener to specification, bleed the system and confirm wheel clearance before the car is driven.

About Alcon

Alcon Components has engineered racing brakes and clutches in Tamworth, Staffordshire, England, and has supplied brakes to top-level teams and constructors since 1983. Its hardware won world rally titles with Audi in 1984 and Volkswagen in 2016, put Alcon into Formula One with Beatrice-Haas in 1986 and made it the sole braking supplier to Formula E from 2014. On the road it supplied the carbon ceramic upgrade for the Bentley Continental GT and the foundation brakes for all 40 Aston Martin Valkyrie AMR Pro cars. In 2017 Alcon took a substantial stake in Pro-System of Mooresville, North Carolina, which machines the rotors, hats and hardware for Alcon brake kits sold in the US.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Alcon Pro-System Front Race Brake Kit for AP1 Honda S2000 (2000-2005) [BRK.200610]

Guaranteed Safe Checkout

Alcon Pro-System Front Race Brake Kit for AP1 Honda S2000 (2000-2005)

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Alcon

Reviews