Which cars does the APR Intercooler for MK6 Gen 3 fit?

The APR Intercooler for MK6 Gen 3 fits the EA888 Gen 3 1.8T and 2.0T in the 2013 to 2018 Jetta and Jetta GLI, the 2013 to 2019 Beetle and the 2014 to 2022 Passat. Earlier EA113 and EA888 Gen 1 and Gen 2 cars use a different APR intercooler.

How much bigger is the APR Jetta GLI intercooler than stock?

APR rates the core at 40 percent larger than the factory unit, at 2.25 x 16.25 x 22 inches, with larger inlets and outlets. The extra capacity lowers charge air temperature and resists heat soak, so power stays consistent through repeated pulls and warm weather.

What comes with the APR Beetle intercooler?

The system includes the intercooler with smooth cast aluminum end tanks, a CNC machined billet adapter and multi-ply silicone hoses with the APR EZ-Flow stepped design. Barbed connections keep the hoses in place, and APR supplies full installation directions with the kit.

Does the APR Passat 1.8T intercooler need trimming?

No. APR designed it as a direct factory fitment with no trimming needed. It replaces the stock front mount intercooler on the listed Passat, Jetta and Beetle models with the EA888 Gen 3 1.8T or 2.0T engine, and APR includes full directions.

Does the APR MK6 Jetta intercooler need a tune?

No tune is needed to fit it. On a stock car it lowers charge air temperature and keeps power steady. On a tuned car, where higher boost creates more heat, the larger core helps the engine keep the timing and power the calibration asks for.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

APR Intercooler for MK6 Gen 3 1.8T and 2.0T VW

The APR Intercooler for MK6 Gen 3 cars fits the EA888 Gen 3 1.8T and 2.0T in the Jetta, Beetle and Passat, replacing the factory front mount with a larger bar and plate core and smooth cast end tanks. It lowers charge air temperature and resists heat soak far better than the stock cooler, so horsepower and torque hold up through repeated pulls and the core has headroom for power well past the factory level.

Construction

The 2.25 x 16.25 x 22 inch core is 40 percent larger than stock, with larger inlets and outlets. Cast aluminum end tanks use barbed connections for a slip proof fit and machined mounting points to save weight, and a CNC machined billet adapter and multi-ply silicone hoses with the APR EZ-Flow stepped design finish the kit.

Features

Bar and plate core, 40 percent larger than stock
Larger inlets and outlets
Smooth cast aluminum end tanks, pressure tested
Barbed hose connections for a slip proof fit
CNC machined billet adapter
Multi-ply silicone hoses with the APR EZ-Flow stepped design
Direct factory fitment with no trimming

Specifications

Core dimensions: 2.25 x 16.25 x 22 in
Cooler type: Air to air, bar and plate
Hoses: Multi-ply silicone with T-bolt clamps
Engine: EA888 Gen 3 1.8T and 2.0T

Applications

Volkswagen Jetta and Jetta GLI: MK6 | 2013-2018 | 1.8T and 2.0T
Volkswagen Beetle: 2013-2019 | 1.8T and 2.0T
Volkswagen Passat: NMS | 2014-2022 | 1.8T and 2.0T

Notes

The Intercooler for MK6 Gen 3 fits EA888 Gen 3 engines only. EA113 and EA888 Gen 1 and Gen 2 cars use the APR Intercooler for MK5 and MK6
APR does not publish a horsepower figure for this cooler; it rates it on core size and charge air temperature

Frequently Asked Questions

Which cars does the APR Intercooler for MK6 Gen 3 fit? The APR Intercooler for MK6 Gen 3 fits the EA888 Gen 3 1.8T and 2.0T in the 2013 to 2018 Jetta and Jetta GLI, the 2013 to 2019 Beetle and the 2014 to 2022 Passat. Earlier EA113 and EA888 Gen 1 and Gen 2 cars use a different APR intercooler.
How much bigger is the APR Jetta GLI intercooler than stock? APR rates the core at 40 percent larger than the factory unit, at 2.25 x 16.25 x 22 inches, with larger inlets and outlets. The extra capacity lowers charge air temperature and resists heat soak, so power stays consistent through repeated pulls and warm weather.
What comes with the APR Beetle intercooler? The system includes the intercooler with smooth cast aluminum end tanks, a CNC machined billet adapter and multi-ply silicone hoses with the APR EZ-Flow stepped design. Barbed connections keep the hoses in place, and APR supplies full installation directions with the kit.
Does the APR Passat 1.8T intercooler need trimming? No. APR designed it as a direct factory fitment with no trimming needed. It replaces the stock front mount intercooler on the listed Passat, Jetta and Beetle models with the EA888 Gen 3 1.8T or 2.0T engine, and APR includes full directions.
Does the APR MK6 Jetta intercooler need a tune? No tune is needed to fit it. On a stock car it lowers charge air temperature and keeps power steady. On a tuned car, where higher boost creates more heat, the larger core helps the engine keep the timing and power the calibration asks for.

About APR Tuning

APR was founded in 1997 and develops performance hardware, software and calibrations for Volkswagen, Audi, SEAT, Skoda and Porsche vehicles, from intakes, intercoolers and turbocharger systems to exhausts, brakes and suspension. It designs and manufactures from an 80,000 square foot headquarters in Opelika, Alabama, which it shares with Dinan as part of Holley Performance Brands, and delivers its software worldwide through a 24-hour automated system run from the same site.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

APR Intercooler for MK6 Gen 3 1.8T and 2.0T VW [IC100018]

Guaranteed Safe Checkout

APR Intercooler for MK6 Gen 3 1.8T and 2.0T VW

Construction

Features

Specifications

Applications

Notes

Frequently Asked Questions

About APR Tuning

Reviews