How much power does the ETS Titanium Intake for CZ4A Mitsubishi Evo X add?

ETS measured more than 56 whp with the ETS Titanium Intake for CZ4A Mitsubishi Evo X and a boost controller set to 22 psi on the factory turbo. That figure depends on the boost controller, so a car without one will see a smaller gain.

Which MAF option should I choose?

Keep the factory MAF housing for a car on the stock turbo or a mild upgrade. The ETS 3.5 inch large MAF housing suits higher-airflow turbo builds, but it changes the airflow reading, so the car must be tuned for it.

Will the intake change the sound?

Yes. The large ETS-spec filter and billet stack increase turbo induction sound, and the blow-off valve becomes much more audible because it is relocated with the new intake pipe. Expect a noticeably more mechanical soundtrack under boost, especially through the mid range.

How long does it take to build?

ETS currently quotes a build time of about two to three weeks for this titanium intake. BA confirms the timing with ETS when the order is placed and keeps you updated until it ships to you. Both finishes take the same time.

Is it hard to install?

No. ETS describes installation as simple: the intake mounts in the stock location and uses the factory MAF housing unless the larger ETS housing is chosen. If the 3.5 inch MAF housing is ordered, book the tune for the same day as the install.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

ETS Stock Location Titanium Intake for CZ4A Mitsubishi Evo X

ETS’s Stock Location Titanium Intake for CZ4A Mitsubishi Evo X pairs a large ETS-spec K&N filter with a billet velocity stack and a CNC mandrel-bent titanium pipe to the turbo. On its own test car ETS measured more than 56 whp with the intake and a boost controller at 22 psi on the factory turbo, with more available on a bigger turbo. It is the right intake for an Evo X on the factory turbo or a mild upgrade; the large MAF option covers higher-airflow builds.

Sound and Setup

The larger filter and stack bring out more induction noise, and relocating the blow-off valve with the intake pipe makes its release more audible. Choose the factory MAF housing or the ETS 3.5-inch large MAF housing, burned or natural titanium.

Features

ETS-spec K&N high-flow filter
Billet velocity stack
CNC mandrel-bent titanium intake pipe
Stock location
Factory or ETS 3.5-inch MAF housing
Burned or natural titanium finish

Specifications

ETS test result: 56+ whp with a boost controller at 22 psi, factory turbo
Filter: ETS-spec K&N
MAF housing: Factory or ETS 3.5 in
Material: Titanium
Build time (ETS): About 2 to 3 weeks

Applications

Mitsubishi Lancer Evolution X: CZ4A | 2008-2015 | 2.0L 4B11T

Notes

ETS measured the gain with a boost controller at 22 psi on the factory turbo; results without one will differ
The 3.5-inch MAF housing requires a tune
This part cannot be shipped to California addresses

Frequently Asked Questions

How much power does the ETS Titanium Intake for CZ4A Mitsubishi Evo X add? ETS measured more than 56 whp with the ETS Titanium Intake for CZ4A Mitsubishi Evo X and a boost controller set to 22 psi on the factory turbo. That figure depends on the boost controller, so a car without one will see a smaller gain.
Which MAF option should I choose? Keep the factory MAF housing for a car on the stock turbo or a mild upgrade. The ETS 3.5 inch large MAF housing suits higher-airflow turbo builds, but it changes the airflow reading, so the car must be tuned for it.
Will the intake change the sound? Yes. The large ETS-spec filter and billet stack increase turbo induction sound, and the blow-off valve becomes much more audible because it is relocated with the new intake pipe. Expect a noticeably more mechanical soundtrack under boost, especially through the mid range.
How long does it take to build? ETS currently quotes a build time of about two to three weeks for this titanium intake. BA confirms the timing with ETS when the order is placed and keeps you updated until it ships to you. Both finishes take the same time.
Is it hard to install? No. ETS describes installation as simple: the intake mounts in the stock location and uses the factory MAF housing unless the larger ETS housing is chosen. If the 3.5 inch MAF housing is ordered, book the tune for the same day as the install.

About Extreme Turbo Systems

Extreme Turbo Systems designs and builds turbo kits, intercoolers, charge piping and exhaust systems at its facility in Ridgefield, Washington, and proves the hardware on its own drag cars. The ETS-G R35 GT-R set the GT-R drag record of 6.54 seconds in 2019 and held it for two years. The ETS Pro Mod GT-R, driven by owner JR Perrott, has run 5.94 seconds at 244 mph on twin Precision turbochargers, and the ETS C8 Corvette has run 8.64 seconds at 170 mph in the quarter mile and made 1,383 whp on the dyno with an ETS PT6870 turbo kit. ETS builds for the Subaru, Mitsubishi, Nissan GT-R, Toyota Supra, Ford, BMW, Corvette and Lamborghini platforms.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

ETS Stock Location Titanium Intake for CZ4A Mitsubishi Evo X

Guaranteed Safe Checkout

ETS Stock Location Titanium Intake for CZ4A Mitsubishi Evo X

Sound and Setup

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Extreme Turbo Systems

Reviews