How does the ETS Dual 3.0-inch Exhaust System for C8 flow so well?

The ETS Dual 3.0-inch Exhaust System for C8 uses full mandrel bent 304 stainless tubing throughout, so the diameter stays constant through every bend. ETS calls it one of the highest flowing exhausts on the market for the C8 Corvette.

Can I choose a quieter version?

Yes. ETS builds the system with or without mufflers. The muffled version suits a car that sees daily driving, while the version without mufflers gives the loudest sound. Tell BA which you want when you place the order. Both share the same tubing.

What do the TurboFlex sections do?

The two 3.0 inch TurboFlex sections use an interlock liner and isolate the exhaust from engine movement. That protects the welds and joints from cracking as the engine rocks under load, which matters on a high power C8. It also reduces vibration.

Is any cutting needed?

No. ETS designed the system as a direct bolt-on with no cutting or modification required, and describes its fitment as industry leading. The quad brushed tips can be left as supplied or coated to suit the car. Basic tools handle the install.

ETS fabricates the exhaust entirely in house in the USA, using locally sourced 304 stainless steel so it can control quality from raw material to finished system. Every system is TIG welded and hand built. Each one leaves the shop ready to bolt on.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

ETS Dual 3.0-inch Exhaust System for C8 Chevrolet Corvette

The ETS Dual 3.0-inch Exhaust System for C8 Chevrolet Corvette is one of the highest flowing exhausts ETS has developed for the C8, using full mandrel bent 304 stainless tubing throughout to maximize flow. ETS builds every system in house from USA sourced material, with performance and sound in mind, and finishes it with quad brushed tips.

Design

The system is a full dual 3.0-inch layout with 3.0-inch TurboFlex sections that use an interlock liner to isolate engine movement. It bolts on directly with no cutting or modification, and ETS describes its fitment as industry leading.

Muffler Choice

ETS builds the system with or without mufflers. Tell BA which version you want when ordering, since the choice changes the sound of the car considerably.

Features

Full dual 3.0-inch layout
Mandrel bent 304 stainless steel, USA sourced
3.0-inch TurboFlex sections with interlock
With or without mufflers
Quad brushed tips
Direct bolt-on, hand built in the USA

Specifications

Layout: Dual 3.0 in
Material: 304 stainless steel, mandrel bent
Flex sections: 3.0 in TurboFlex with interlock
Tips: Quad, brushed
Mufflers: With or without (specify when ordering)
SKU: 1050-10-EXH-004

Applications

Chevrolet Corvette Stingray: C8 | 2020-2026 | 6.2L LT2

Notes

Specify with or without mufflers when ordering
Ask BA to confirm how this system connects to your headers or turbo kit before ordering
This part cannot be shipped to California addresses

Frequently Asked Questions

How does the ETS Dual 3.0-inch Exhaust System for C8 flow so well? The ETS Dual 3.0-inch Exhaust System for C8 uses full mandrel bent 304 stainless tubing throughout, so the diameter stays constant through every bend. ETS calls it one of the highest flowing exhausts on the market for the C8 Corvette.
Can I choose a quieter version? Yes. ETS builds the system with or without mufflers. The muffled version suits a car that sees daily driving, while the version without mufflers gives the loudest sound. Tell BA which you want when you place the order. Both share the same tubing.
What do the TurboFlex sections do? The two 3.0 inch TurboFlex sections use an interlock liner and isolate the exhaust from engine movement. That protects the welds and joints from cracking as the engine rocks under load, which matters on a high power C8. It also reduces vibration.
Is any cutting needed? No. ETS designed the system as a direct bolt-on with no cutting or modification required, and describes its fitment as industry leading. The quad brushed tips can be left as supplied or coated to suit the car. Basic tools handle the install.
Where is it made? ETS fabricates the exhaust entirely in house in the USA, using locally sourced 304 stainless steel so it can control quality from raw material to finished system. Every system is TIG welded and hand built. Each one leaves the shop ready to bolt on.

About Extreme Turbo Systems

Extreme Turbo Systems designs and builds turbo kits, intercoolers, charge piping and exhaust systems at its facility in Ridgefield, Washington, and proves the hardware on its own drag cars. The ETS-G R35 GT-R set the GT-R drag record of 6.54 seconds in 2019 and held it for two years. The ETS Pro Mod GT-R, driven by owner JR Perrott, has run 5.94 seconds at 244 mph on twin Precision turbochargers, and the ETS C8 Corvette has run 8.64 seconds at 170 mph in the quarter mile and made 1,383 whp on the dyno with an ETS PT6870 turbo kit. ETS builds for the Subaru, Mitsubishi, Nissan GT-R, Toyota Supra, Ford, BMW, Corvette and Lamborghini platforms.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

ETS Dual 3.0-inch Exhaust System for C8 Chevrolet Corvette [1050-10-EXH-004]

Guaranteed Safe Checkout

ETS Dual 3.0-inch Exhaust System for C8 Chevrolet Corvette

Design

Muffler Choice

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Extreme Turbo Systems

Reviews