Does the red Wilwood DPHA Brake Kit for Honda Civic fit an EP3 Civic Si?

Yes. Wilwood lists the 2002-2003 Civic Si and SiR among the cars for this red DPHA Brake Kit for Honda Civic, along with the 1999-2000 Si coupe, the 1994-1995 Si hatchback, the 1990-2001 Integra except the Type R and the 2007-2013 Fit.

How is the DPHA caliper built?

The DPHA body is forged and machined from billet, based on the Wilwood DynaPro four-piston design. Stainless pistons load the pad evenly and resist heat soak and corrosion, and the high gloss powder coat is rated for high temperature and brake fluid contact.

Do I need a separate line kit?

No. Wilwood made the DPHA caliper to accept the factory brake hose, so the kit goes on without new lines. If the factory hoses are cracked or original to an older car, replacing them during the install is cheap insurance and improves pedal feel.

Will my wheels still fit?

The rotor stays at the factory 262mm and the hub offset is zero, so wheel position does not change. Many factory 15 inch wheels clear the caliper, but check the wheel clearance diagram from the gallery against your own wheel before ordering.

Can I get the calipers in a custom finish?

Yes. Wilwood offers caliper finishes beyond the standard black, red and Competition Blue at extra cost. Tell Bulletproof Automotive which finish you are after and we will check pricing and lead time with Wilwood before the order is ever placed.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Wilwood Red Drilled and Slotted Front DPHA Brake Kit for Honda Civic, Acura Integra and Honda Fit

Wilwood’s Red Drilled and Slotted Front DPHA Brake Kit for Honda Civic, Acura Integra and Honda Fit gives a 262mm-rotor Honda gloss red forged calipers and SRP drilled and slotted rotors without a bigger wheel. Each DPHA caliper clamps a 7812 BP-10 pad with two 1.62in stainless pistons per side, and Wilwood designed it to work with the stock master cylinder, ABS and brake hose.

Features

Red powder coat forged DPHA four-piston calipers
SRP drilled and slotted 10.32in vented rotors
Two 1.62in stainless pistons per side
Factory master cylinder, ABS and brake hose retained
Front DPHA Brake Kit for Honda Civic with no spacers or brackets

Specifications

Caliper: Wilwood Forged DPHA, four-piston, lug mount
Caliper finish: Red powder coat
Piston bores: 1.62in (x2) per side, stainless pistons
Piston area: 4.12 sq in
Pad shape, area and volume: 7812, 6.36 sq in, 2.1 cu in
Pad compound: BP-10
Rotor size: 10.32in x 0.83in (262mm x 21mm)
Rotor: SRP drilled and slotted vented iron rotor, black E-coat
Hub offset: 0.00in
Minimum wheel diameter: 15in

What’s Included

Wilwood Forged DPHA red calipers (L/R)
10.32in vented rotors (L/R)
BP-10 front brake pad set
Caliper mounting bolts and washers

Applications

Acura Integra: 1990-1996 | all trims
Acura Integra: 1997-2001 | all trims except Type R
Honda Civic Coupe: EX 1993-1995 | EX with rear disc 1994-1995 | EX 1996-2000 | Si 1999-2000
Honda Civic Hatchback: Si | 1994-1995
Honda Civic Sedan: EX 1990-2000 | EX with rear disc 1992-1995 | LX 1994-1996
Honda Civic: EX and GX 2001-2003 | EX, GX and LX 2004-2005 | DX, HX and VP 2005
Honda Civic Si and SiR: EP3 | 2002-2003
Honda Fit: GD / GE | Base and Sport 2007-2013 | DX and LX 2008-2013 | EX 2012-2013 | DX-A 2012

Notes

Covers both front corners in one kit
Wilwood lists the kit only for cars originally equipped with 262mm (10.32in) front rotors and their factory spindles
Brake lines are not part of the kit; the DPHA caliper is made to take the OE brake hose
Rated for some 15in wheels; confirm clearance with the wheel clearance diagram in the gallery
Want plain rotors with the red calipers? See the red plain face DPHA kit
Other caliper finishes are available from Wilwood at extra cost; contact us to order one
Wilwood recommends installation by a technician experienced with disc brake systems

Frequently Asked Questions

Does the red Wilwood DPHA Brake Kit for Honda Civic fit an EP3 Civic Si? Yes. Wilwood lists the 2002-2003 Civic Si and SiR among the cars for this red DPHA Brake Kit for Honda Civic, along with the 1999-2000 Si coupe, the 1994-1995 Si hatchback, the 1990-2001 Integra except the Type R and the 2007-2013 Fit.
How is the DPHA caliper built? The DPHA body is forged and machined from billet, based on the Wilwood DynaPro four-piston design. Stainless pistons load the pad evenly and resist heat soak and corrosion, and the high gloss powder coat is rated for high temperature and brake fluid contact.
Do I need a separate line kit? No. Wilwood made the DPHA caliper to accept the factory brake hose, so the kit goes on without new lines. If the factory hoses are cracked or original to an older car, replacing them during the install is cheap insurance and improves pedal feel.
Will my wheels still fit? The rotor stays at the factory 262mm and the hub offset is zero, so wheel position does not change. Many factory 15 inch wheels clear the caliper, but check the wheel clearance diagram from the gallery against your own wheel before ordering.
Can I get the calipers in a custom finish? Yes. Wilwood offers caliper finishes beyond the standard black, red and Competition Blue at extra cost. Tell Bulletproof Automotive which finish you are after and we will check pricing and lead time with Wilwood before the order is ever placed.

About Wilwood

Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Wilwood Red Drilled and Slotted Front DPHA Brake Kit for Honda Civic, Acura Integra and Honda Fit [140-12996-DR]

Guaranteed Safe Checkout

Wilwood Red Drilled and Slotted Front DPHA Brake Kit for Honda Civic, Acura Integra and Honda Fit

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Wilwood

Reviews