Which cars does the Type MZ 1-Way Front LSD with 2-Way Option for CE9A fit?

Cusco USA lists part number LSD 134 A for the Mitsubishi Lancer Evolution III (CE9A, 1995-1996), the Mitsubishi Lancer Evolution II (CE9A, 1994-1995), the Mitsubishi Galant VR-4 (E38, E39, 1987-1993) and the other cars listed under Applications. The Type MZ 1-Way Front LSD with 2-Way Option for CE9A replaces the factory front differential, so check the notes on this page for any model or transmission limits before ordering.

What does 1-way mean?

A 1-way LSD locks only under acceleration. When the driver lifts or brakes it stays open like a factory diff, so the car turns in and rotates freely off the throttle. It is the most forgiving setting for a car that is also driven on the street, and the least likely to make the car push on corner entry.

How does the Type MZ differ from the Type RS?

The Type MZ uses a high-pressure cone spring that works against the activation pressure, which gives it the highest initial torque of any Cusco LSD and a linear build to full lock. The Type RS uses coil springs for a lower initial torque and smoother, quicker engagement, which makes it the friendlier choice for a street car.

Can the ramp setting be changed later?

Cusco lists the setting for this unit as 1 way (1 and 2 way). Where Cusco names an alternate or optional ramp set, the unit can be changed over when the differential is opened, so it is best combined with a differential service rather than treated as a quick change at the track.

What should I know before installing it?

On a front differential the transmission must be removed and split to fit the Cusco unit, so most owners have a drivetrain specialist do it. Plan on fresh gear oil, since Cusco sells its own LSD oil for clutch-type differentials, and read the notes on this page for any extra parts Cusco says the job needs.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Cusco Type MZ 1-Way Front LSD with 2-Way Option for CE9A Mitsubishi Lancer Evolution III, Lancer Evolution II, Galant VR-4 and Lancer Evolution I

Cusco’s Type MZ 1-Way Front LSD with 2-Way Option for CE9A and related Mitsubishi models replaces the factory front differential with a clutch-type limited-slip unit built around a high-pressure cone spring, which gives the Type MZ the highest initial torque of any Cusco LSD. In 1-way form it locks under acceleration only and stays open off the throttle, so turn-in feels close to stock. The cone spring brings the clutch pack to full lock at a linear rate, so the locking effect builds predictably. It suits a car that sees competition, where strong locking matters more than street manners.

Features

High-pressure cone spring for the highest initial torque in the Cusco range
1-way action: locks on acceleration only
Linear build to full clutch-pack lock
Clutch-type multi-plate design in place of the factory front differential
Built for the Lancer Evolution III and related models

Specifications

Cusco part number: LSD 134 A
Type: Type MZ
Action: 1-way
Cusco setting: 1 way (1 & 2 way)
Position: Front differential

Applications

Mitsubishi Galant VR-4: E38 | 1987-1993
Mitsubishi Lancer Evolution III: CE9A | 1995,1996
Mitsubishi Lancer Evolution II: CE9A | 1994,1995
Mitsubishi Galant VR-4: E39 | 1988-1993
Mitsubishi Lancer Evolution I: CD9A | 1992,1993

Notes

Fitting the Type MZ 1-Way Front LSD with 2-Way Option for CE9A means removing the transmission and splitting it to swap the differential; installation labor is not included
Cusco: Comes with speed meter driven gear & ring gear bolts. To use this LSD for OE Viscous LSD equipped vehicle, requires to replace ring gear and side shafts.

Frequently Asked Questions

Which cars does the Type MZ 1-Way Front LSD with 2-Way Option for CE9A fit? Cusco USA lists part number LSD 134 A for the Mitsubishi Lancer Evolution III (CE9A, 1995-1996), the Mitsubishi Lancer Evolution II (CE9A, 1994-1995), the Mitsubishi Galant VR-4 (E38, E39, 1987-1993) and the other cars listed under Applications. The Type MZ 1-Way Front LSD with 2-Way Option for CE9A replaces the factory front differential, so check the notes on this page for any model or transmission limits before ordering.
What does 1-way mean? A 1-way LSD locks only under acceleration. When the driver lifts or brakes it stays open like a factory diff, so the car turns in and rotates freely off the throttle. It is the most forgiving setting for a car that is also driven on the street, and the least likely to make the car push on corner entry.
How does the Type MZ differ from the Type RS? The Type MZ uses a high-pressure cone spring that works against the activation pressure, which gives it the highest initial torque of any Cusco LSD and a linear build to full lock. The Type RS uses coil springs for a lower initial torque and smoother, quicker engagement, which makes it the friendlier choice for a street car.
Can the ramp setting be changed later? Cusco lists the setting for this unit as 1 way (1 and 2 way). Where Cusco names an alternate or optional ramp set, the unit can be changed over when the differential is opened, so it is best combined with a differential service rather than treated as a quick change at the track.
What should I know before installing it? On a front differential the transmission must be removed and split to fit the Cusco unit, so most owners have a drivetrain specialist do it. Plan on fresh gear oil, since Cusco sells its own LSD oil for clutch-type differentials, and read the notes on this page for any extra parts Cusco says the job needs.

About CUSCO

CUSCO is the brand of Carrosser Co., Ltd., founded in December 1977 and based in Takasaki, Gunma Prefecture, Japan. Carrosser designs and builds coilovers, limited-slip differentials, clutches, roll cages and chassis parts, sells its steel cages under the Safety 21 name, and competes in every All Japan Championship category from circuit racing to rally and gymkhana. CUSCO USA, a division of Carrosser, is based in Huntington Beach, California.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Cusco Type MZ 1-Way Front LSD with 2-Way Option for CE9A Mitsubishi Lancer Evolution III, Lancer Evolution II, Galant VR-4 and Lancer Evolution I [LSD 134 A]

Guaranteed Safe Checkout

Cusco Type MZ 1-Way Front LSD with 2-Way Option for CE9A Mitsubishi Lancer Evolution III, Lancer Evolution II, Galant VR-4 and Lancer Evolution I

Features

Specifications

Applications

Notes

Frequently Asked Questions

About CUSCO

Reviews