Is the GT7 Crosstrek kit different from the GP7 kit?

Yes. RS-R lists XBIF512M for the 2018 to 2023 GT7 Crosstrek and XBIF513M for the 2013 to 2017 GP7. The two share spring rates and height ranges on paper, but the chassis changed between generations, so each kit is built for its own car and should be ordered by model year.

What ride height does the GT7 Crosstrek sit at on the RS-R Best-i Jouge Coilovers for GT7?

At the RS-R preset the Best-i Jouge Coilovers for GT7 kit sets the GT7 Crosstrek about 5mm to 10mm higher at both the front and the rear. RS-R recommends plus 40mm to minus 25mm at the front and plus 40mm to minus 25mm at the rear, and the full-length bodies keep the same stroke at any height.

Is the Best-i Jouge a good fit when the GT7 Crosstrek leaves the pavement?

It suits light gravel and rough roads well. RS-R lets the Best-i Jouge sit slightly above stock, so the GT7 Crosstrek can keep or gain clearance for unpaved roads while still controlling body roll, and the same kit can be lowered for a cleaner stance on the street. It is not built for serious off-road use or large lift heights.

Can the GT7 Crosstrek dampers be rebuilt when they wear?

Yes. RS-R assembles the Best-i Jouge range in-house in Japan, so the dampers on this GT7 Crosstrek kit can be overhauled to restore their original damping rather than replaced. RS-R USA covers the kit for 1 year or 12,000 miles from purchase, and Bulletproof Automotive handles any warranty claim with RS-R for the owner.

Should the RS-R coilovers on the GT7 Crosstrek be installed by a shop?

It is the safer choice. Fitting coilovers involves the suspension mounts, hubs and brake lines, and the GT7 Crosstrek needs a wheel alignment afterwards. A shop familiar with the car will also set the ride height evenly side to side and torque everything to specification before the alignment is done.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

RS-R Best-i Jouge Coilovers for GT7 Subaru Crosstrek (2018-2023)

RS-R’s Best-i Jouge Coilovers for GT7 Subaru Crosstrek (2018-2023) give the second-generation Crosstrek a height-adjustable suspension that can go up as well as down. RS-R presets the car about 5mm to 10mm above stock, recommends a range from 40mm up to 25mm down at each end, and fits 6.0 kg/mm front and 5.0 kg/mm rear Ti2000 springs. Monotube dampers with 36 steps at the front and 24 at the rear tighten body control on pavement while the extra height keeps trailheads and snowy roads within reach.

Features

36-step damping adjustment at the front and 24-step at the rear
Ride height adjustable above and below stock
Monotube dampers with a 40mm steel body (46mm on strut types)
Full-length adjustable bodies with a lock-seatless lower seat for quick height changes
Ti2000 springs, assembled in-house in Japan

Specifications

Spring rate, front: 6.0 kg/mm
Spring rate, rear: 5.0 kg/mm
Damping adjustment: 36 steps front, 24 steps rear
Preset ride height, front: +10mm to +5mm (+0.4in to +0.2in)
Preset ride height, rear: +10mm to +5mm (+0.4in to +0.2in)
Maximum adjustment, front: +50mm to -45mm (+2.0in to -1.8in)
Maximum adjustment, rear: +75mm to -55mm (+3.0in to -2.2in)
Warranty: 1 year or 12,000 miles from purchase

What’s Included

Front and rear dampers (x4)
Front and rear Ti2000 springs

Applications

Subaru Crosstrek: GT7 | 2018-2023 | gasoline models

Notes

The Best-i Jouge Coilovers for GT7 kit uses manual dampers adjusted at each corner
RS-R states fitment is unconfirmed on the hybrid model
The 2013-2017 Crosstrek kit is the RS-R Best-i Jouge Coilovers for GP7 Subaru Crosstrek (2013-2017); the 2024 and later kit is the RS-R Best-i Jouge Coilovers for GUH Subaru Crosstrek (2024+)
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Is the GT7 Crosstrek kit different from the GP7 kit? Yes. RS-R lists XBIF512M for the 2018 to 2023 GT7 Crosstrek and XBIF513M for the 2013 to 2017 GP7. The two share spring rates and height ranges on paper, but the chassis changed between generations, so each kit is built for its own car and should be ordered by model year.
What ride height does the GT7 Crosstrek sit at on the RS-R Best-i Jouge Coilovers for GT7? At the RS-R preset the Best-i Jouge Coilovers for GT7 kit sets the GT7 Crosstrek about 5mm to 10mm higher at both the front and the rear. RS-R recommends plus 40mm to minus 25mm at the front and plus 40mm to minus 25mm at the rear, and the full-length bodies keep the same stroke at any height.
Is the Best-i Jouge a good fit when the GT7 Crosstrek leaves the pavement? It suits light gravel and rough roads well. RS-R lets the Best-i Jouge sit slightly above stock, so the GT7 Crosstrek can keep or gain clearance for unpaved roads while still controlling body roll, and the same kit can be lowered for a cleaner stance on the street. It is not built for serious off-road use or large lift heights.
Can the GT7 Crosstrek dampers be rebuilt when they wear? Yes. RS-R assembles the Best-i Jouge range in-house in Japan, so the dampers on this GT7 Crosstrek kit can be overhauled to restore their original damping rather than replaced. RS-R USA covers the kit for 1 year or 12,000 miles from purchase, and Bulletproof Automotive handles any warranty claim with RS-R for the owner.
Should the RS-R coilovers on the GT7 Crosstrek be installed by a shop? It is the safer choice. Fitting coilovers involves the suspension mounts, hubs and brake lines, and the GT7 Crosstrek needs a wheel alignment afterwards. A shop familiar with the car will also set the ride height evenly side to side and torque everything to specification before the alignment is done.

About RS-R

RS-R began in 1968 as a car parts shop in Osaka and has produced its own suspension, coilovers and mufflers since 1972. Now headquartered in Toyonaka, Osaka, where its plant has been since 1999, RS-R manufactures in-house in Japan, with coilover ranges including Sports-i, Black-i and Best-i and the Ti2000 spring range.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

RS-R Best-i Jouge Coilovers for GT7 Subaru Crosstrek (2018-2023) [XBIF512M]

Guaranteed Safe Checkout

RS-R Best-i Jouge Coilovers for GT7 Subaru Crosstrek (2018-2023)

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About RS-R

Reviews