PRL Motorsports High Volume Intake System for CV1 Honda Accord 1.5T [PRL-HA10-15T-INT-HVI]
$430.00
-
PRL’s intake for the CV1 Honda Accord 1.5T pairs a 4-inch oiled cone filter and a 2-piece billet MAF housing with an HDPE rotomolded air box, with no ECU calibration required.
These items are typically not in stock and either made-to-order or special order from the manufacturer. After you order we will confirm the estimated lead time and other order details. If you have a specific deadline to receive this order please talk to us before placing your order to ensure that the manufacturer can meet your expectations.
This item and any similar items are not CARB approved and therefore not for sale in the state of California or other states that require CARB certification. No assessment is being made regarding this product's compliance with the EPA's anti tampering policy, only that the necessary testing and validation has not been completed. Please check with your local enforcement officials regarding legality of use in your place of residence.
PRL Motorsports High Volume Intake System for CV1 Honda Accord 1.5T
The PRL Accord High Volume Intake System pairs a 4-inch oiled cone filter with a 2-piece billet MAF housing and velocity stack to allow maximum airflow while delivering proper fuel trims. Its HDPE rotomolded air box uses the factory air duct, which seals against the integrated air box scoop to reduce heat soak. Custom-molded 4-ply silicone lets the components attach without blocking airflow, and no ECU calibration is required.
Features
Accord High Volume Intake System with a 4-inch oiled cone filter and a 2-piece billet MAF housing with velocity stack
HDPE rotomolded air box that uses the factory air duct and seals against the integrated air box scoop
Reduced heat soak
Custom-molded 4-ply silicone intake hose
Stainless mounting brackets, liner worm clamps and hardware included
What’s Included
HDPE air box assembly (1)
Air box lid (1)
2-piece billet MAF housing with velocity stack (1)
No ECU calibration required for the Accord High Volume Intake System
Fits all variant models including CVT, 6MT, RHD and international models
Not compatible with the Accord 2.0T, which has a separate PRL high volume intake
Not California legal and no CARB EO number is listed for this product
Frequently Asked Questions
What vehicles does the PRL Accord High Volume Intake System fit? The kit fits all 2018-2022 Honda Accord 1.5T (CV1) models with the 1.5L turbo L15B7 engine, including variants such as CVT, 6MT, RHD and international models. A 2021 Accord fits as long as it has the 1.5T engine.
Does the Accord High Volume Intake System require a tune? No. No ECU calibration is required.
What is included in the Accord High Volume Intake System? The kit includes an HDPE air box assembly and lid, a 2-piece billet MAF housing with velocity stack, a 4-inch oiled cone air filter, a billet aluminum EVAP fitting, a 4-ply silicone intake hose, stainless mounting brackets, three stainless steel liner worm clamps, an air duct seal, two OE-style push clips, and stainless hardware.
How does the PRL air box reduce heat soak? The Accord High Volume Intake System uses an HDPE rotomolded air box with the factory air duct, which seals against the integrated air box scoop. The design is intended to allow maximum airflow while delivering proper fuel trims and reducing heat soak.
Is the Accord High Volume Intake System California legal? No. PRL states the product is not California legal, and no CARB EO number is listed for it.
Does the Accord High Volume Intake System fit the 2.0T Accord? No. The kit does not fit the 2.0T Accord. PRL offers a separate high volume intake for the Accord 2.0T.
About PRL Motorsports
PRL Motorsports started in 2007 as PRL Racing, a small group of enthusiasts outside Pittsburgh, Pennsylvania, united by a single goal: faster lap times. What began trackside quickly earned a reputation for engineering excellence, producing race cars capable of 9-second quarter-mile passes as early as 2007 and 6-second times by 2009. By 2011, the operation had grown into PRL Motorsports, expanding from trackside tuning into full-scale product development and fabrication across Honda, Nissan, Mitsubishi, and Subaru platforms. In 2018, PRL Motorsports made a deliberate shift to focus entirely on manufacturing, concentrating their resources on engineering and producing performance components rather than installation and tuning services. Today, PRL Motorsports operates from a 25,000 sq/ft facility in Export, Pennsylvania, staffed by over 25 professionals and equipped with CNC machining departments, automated cutting stations, dual-spindle lathes, 5-axis milling centers, and robotic loading systems running 24-hour production capacity. Their catalog covers intercooler systems, intake systems, turbocharger systems, exhaust components, and throttle body and intake manifold adapters, many of which carry CARB compliance and SEMA Garage certification. From a 9-second S13 to tuning the first 10th-generation Civic into the 10-second range in 2019, PRL Motorsports has built its reputation on one principle: never settle, always push for the best possible outcome.
g 24-hour production capacity. Their catalog covers intercooler systems, intake systems, turbocharger systems, exhaust components, and throttle body and intake manifold adapters, many of which carry CARB compliance and SEMA Garage certification. From a 9-second S13 to tuning the first 10th-generation Civic into the 10-second range in 2019, PRL Motorsports has built its reputation on one principle: never settle, always push for the best possible outcome.
Additional Information
-+
The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.
Shipping Policy
-+
Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.
BP Pricing Difference
-+
We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well.
For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.
Reviews
-+
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Stay up to date with the latest product releases, Bulletproof Automotive builds and more. Sign up for our newsletter to receive the most up to date information in the aftermarket tuning world, and bring your build to a whole new level.
![Spoon Sports Engine Transmission Mounts for AP1 / AP2 Honda S2000 [50800-AP1-010]](https://bulletproofautomotive.com/wp-content/uploads/2026/10/50800-AP1-010-1-450x319.jpg)
![J’s Racing Phantom Side Fences for AP1 / AP2 Honda S2000 [PHGT-S1-SF]](https://bulletproofautomotive.com/wp-content/uploads/2026/10/1_000000002610-450x450.jpg)
![Esprit Rear Racing Diffuser (4 fin) for 1990-06 Honda NSX [NA1/NA2]](https://bulletproofautomotive.com/wp-content/uploads/2021/12/esprit-diffuser-4-fin-espritnsx9-1.347-450x450.jpg)
![DISCONTINUED – HKS Fuel Up Grade kit AP1 for GTSC for 1999-2003 Honda S2000 [AP1] 14007-AH001 – DISCONTINUED](https://bulletproofautomotive.com/wp-content/uploads/2021/12/hks-fuel-up-grade-kit-ap1-for-gtsc-hkss20008-1.347-450x400.jpg)
Reviews
There are no reviews yet.