Do the ID1750-XDS 60mm Fuel Injectors fit a supercharged FJ Cruiser?

Yes. Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors with the 14mm top and Denso lower cushion for the FJ Cruiser, 4Runner and Tundra. With a supercharger or turbo kit and E85, the set gives the engine far more fuel than the factory injectors, and the calibration must be updated to match.

Which set fits an RB26 with a 14mm top rail?

This one. Injector Dynamics lists the R32, R33 and R34 Skyline GT-R with a Denso lower cushion in both 11mm and 14mm top versions. If your rail takes a 14mm top seal, this set fits; for an 11mm top, choose the version with the blue 11mm adapter in the same flow class.

Which fuels can an RB26 or FJ Cruiser run with this set?

Injector Dynamics approves methanol, ethanol, MTBE, nitromethane and all known hydrocarbon fuels, which covers pump gasoline, race fuel and E85. Keep the filter on the Skyline or Toyota truck in good condition, since the one year warranty depends on correct fuel and proper filtration.

Is the 1750 too much injector for a stock 4Runner or Tundra?

Yes. At 1728cc per minute each, the six are sized for a supercharged or turbocharged engine on ethanol, and a stock Toyota truck cannot use that flow. For a mild build, the ID1050-XDS at 1065cc per minute and up to 10 bar, also offered in a 60mm body, is the more sensible choice.

Can a single injector be replaced if one fails?

Yes, through Injector Dynamics rather than off the shelf, so the replacement keeps the flow match across all six on the RB26 or Toyota truck. Manufacturer defects are covered for one year from purchase when the injectors have run correct fuel with proper filtration.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 14mm Top and Denso Lower Cushion, Set of 6

Injector Dynamics’ ID1750-XDS 60mm Fuel Injectors in this set of six pair a purple 14mm top adapter with a Denso lower cushion, and Injector Dynamics lists them for the R32, R33 and R34 Skyline GT-R and for the Toyota FJ Cruiser, 4Runner and Tundra. On an RB26 with a big single turbo or E85, 1728cc/min per injector is a large step up in fuel supply. The Toyota trucks only need this set once a supercharger or turbo kit goes on. Kept stock, either platform is better served by the factory parts or a smaller flow class.

Configuration

The Denso lower cushion matches the Denso-style manifold bores on these engines, and the purple adapter sets a 14mm top. Injector Dynamics also lists the Skyline GT-R with an 11mm top, so check your fuel rail before choosing.

Features

Denso lower cushions with purple 14mm top adapters on all six injectors
Better cylinder-to-cylinder balance at low pulsewidths for steadier idle and light cruise
Improved pressure sensitivity compared with the ID1700

Specifications

Nominal flow: 1728cc/min at 3.0 bar (43.5 psi), E10 certification fuel at 49C (120F)
Maximum differential fuel pressure: 7.0 bar (101.5 psi)
Offset: 1169 microseconds at 43.5 psi and 12 volts
Electrical connector: USCAR
Body length: 60mm
Top: 14mm adapter (purple)
Lower: Denso lower cushion

What’s Included

ID1750-XDS fuel injectors with purple 14mm top adapters and Denso lower cushions (x6)

Applications

Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors in this configuration for:

Nissan Skyline GT-R: R32 / R33 / R34
Toyota: FJ Cruiser, 4Runner, Tundra

Notes

The Skyline GT-R is also listed with an 11mm top and Denso lower cushion; match the top size to your fuel rail
USCAR connectors are fitted; Denso, EV1 and OBD2 Honda wiring needs plug-and-play adapters, sold separately; for Denso plugs see the Injector Dynamics USCAR to Denso PnP Adapter
The engine must be recalibrated with the Injector Dynamics characterization data before it is driven

Frequently Asked Questions

Do the ID1750-XDS 60mm Fuel Injectors fit a supercharged FJ Cruiser? Yes. Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors with the 14mm top and Denso lower cushion for the FJ Cruiser, 4Runner and Tundra. With a supercharger or turbo kit and E85, the set gives the engine far more fuel than the factory injectors, and the calibration must be updated to match.
Which set fits an RB26 with a 14mm top rail? This one. Injector Dynamics lists the R32, R33 and R34 Skyline GT-R with a Denso lower cushion in both 11mm and 14mm top versions. If your rail takes a 14mm top seal, this set fits; for an 11mm top, choose the version with the blue 11mm adapter in the same flow class.
Which fuels can an RB26 or FJ Cruiser run with this set? Injector Dynamics approves methanol, ethanol, MTBE, nitromethane and all known hydrocarbon fuels, which covers pump gasoline, race fuel and E85. Keep the filter on the Skyline or Toyota truck in good condition, since the one year warranty depends on correct fuel and proper filtration.
Is the 1750 too much injector for a stock 4Runner or Tundra? Yes. At 1728cc per minute each, the six are sized for a supercharged or turbocharged engine on ethanol, and a stock Toyota truck cannot use that flow. For a mild build, the ID1050-XDS at 1065cc per minute and up to 10 bar, also offered in a 60mm body, is the more sensible choice.
Can a single injector be replaced if one fails? Yes, through Injector Dynamics rather than off the shelf, so the replacement keeps the flow match across all six on the RB26 or Toyota truck. Manufacturer defects are covered for one year from purchase when the injectors have run correct fuel with proper filtration.

About Injector Dynamics

Injector Dynamics is an Arizona injector specialist and an authorized technical partner of Bosch Motorsport, developing its injectors to its own specification rather than modifying production parts. It introduced slope and offset matching in 2007, and its Dual Slope Matching, developed by engineer Aaron Looft, extends matching into the short pulse widths that boosted and ethanol engines rely on. Its flow benches are built in house and calibrated against a NIST-traceable flow prover. Injector Dynamics supplied the emissions-compliant injectors for the twin-turbo Noble M600, and its injectors were fitted to the first seven-second Nissan GT-R and the first 300 mph motorcycle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 14mm Top and Denso Lower Cushion, Set of 6 [1750.60.14.D.6]

Guaranteed Safe Checkout

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 14mm Top and Denso Lower Cushion, Set of 6

Configuration

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Injector Dynamics

Reviews