How does the Nitron Elise SC RacePro 3 help with exit traction?

The Nitron Elise SC RacePro 3 adjusts rebound, low-speed compression and high-speed compression independently at every corner. Rear low-speed compression controls how the supercharged Elise SC squats and loads its rear tires under power, while front rebound controls how quickly the nose unloads. Tuning both lets you balance traction and front grip out of every corner.

What does the 46mm piston do on the Nitron S2 Elise SC RacePro 3?

The 46mm piston in the Nitron S2 Elise SC RacePro 3 moves a larger volume of oil for every millimeter of travel. That gives the damper accurate control as loads build under braking, cornering and hard acceleration. Each adjuster click also makes a clear, repeatable change, which helps when you’re fine-tuning how the car puts its power down.

Are mounting brackets included with the Nitron Elise SC RacePro 3?

Yes. Mounting brackets are included with every Nitron Elise SC RacePro 3 kit and are supplied to suit your car’s drive side. Select LHD or RHD when ordering, and the kit arrives with the correct brackets to mount the coilovers and reservoirs to the factory double wishbone suspension.

How does the Nitron S2 Elise SC RacePro 3 differ from the NTR-R1 kits?

The Nitron S2 Elise SC RacePro 3 is the full-race kit, built around a 46mm piston with independent 3-way adjustment and remote reservoirs. The Nitron NTR-R1 FastRoad and ClubSport kits use a single combined adjuster and no reservoirs, with spring rates aimed at road driving and track days respectively.

How are the reservoirs mounted on the Nitron Elise SC RacePro 3?

The Nitron Elise SC RacePro 3 uses hose-mounted reservoirs at both ends, each connected to its damper by a hose. Nitron’s Bi-Axis fittings let each hose leave the damper at the correct angle, so routing past the wishbones, ducting and bodywork stays clean. Plan the reservoir locations so the adjusters are easy to reach between sessions.

How often should the Nitron S2 Elise SC RacePro 3 be rebuilt?

Service intervals depend on how hard and how often the car runs. Many race teams rebuild their Nitron S2 Elise SC RacePro 3 dampers between seasons, or sooner on a busy calendar. Every unit is fully serviceable, and revalving can be done at the same time if your tires, aero or series change.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Nitron RacePro 3 Coilover Kit for S2 Lotus Elise SC

On slicks, the supercharged Elise SC can deliver more drive out of a corner than the rear tires can comfortably take, especially on the way out of slow corners. How well that drive gets used depends on what happens at the rear axle in the first few feet after the apex. The Nitron Elise SC RacePro 3 coilover kit gives you direct control over that moment. It’s built to Nitron’s full-race specification around a 46mm piston, with independent rebound, low-speed compression and high-speed compression at every corner. Rear low-speed compression sets how quickly the car squats and loads the rear tires as you open the throttle. Front rebound controls how quickly the nose rises and unloads the front. Tuning the two together lets you balance exit traction against front-end grip, so the SC drives off the corner instead of spinning a tire or pushing wide. High-speed compression is set separately for curbs and bumps. Hose-mounted reservoirs front and rear keep the compression adjusters within reach between sessions. Mounting brackets for your car’s drive side are included, so the Nitron S2 Elise SC RacePro 3 fits straight into the factory double wishbone suspension.

Specialized Bi-Axis Hose Fittings

With reservoirs at both ends, the Elise SC has four hoses that each need a secure route past the wishbones, brake lines, ducting and bodywork. That route also depends on which side the car is driven from. Nitron’s exclusive Bi-Axis fittings swivel on two planes where each hose leaves the damper. That lets every hose on the Nitron S2 Elise SC RacePro 3 point directly toward its reservoir instead of being forced into a tight bend. With drive-side brackets supplied for your car, the installation stays neat at both ends, and the hoses stay clear through full bump, full droop and full steering lock.

Unique Technology

The Nitron RacePro 3 is built around a 46mm piston that pushes a larger volume of oil through the valving for every millimeter of shaft travel. Damping force builds accurately as loads rise, so the damper keeps control in reserve under heavy braking, through fast corners and during the sudden weight shift of hard acceleration. That accuracy is what makes exit tuning possible on the Nitron Elise SC RacePro 3. A small change to rear low-speed compression produces a clear, repeatable difference in how the car puts its power down. The hose-mounted reservoirs add oil volume away from the damper body, so damping stays consistent over a full race distance as temperatures climb. High- and low-speed compression adjust independently at each reservoir, which gives you the separation to change one behavior without disturbing another.
- Basic Damper Design:
  1. End Eye / Top Mount
  2. Damper Piston & Shim Stack
  3. Shaft / Rod
  4. Floating / Separator Piston
  5. Suspension Oil
  6. Compressed Nitrogen Gas

Bespoke Engineering

Each Nitron Elise SC RacePro 3 kit is hand-built to order, with springs and valving specified for the car’s tires, aero and series rather than for road comfort. That makes it the right fit for an S2 Elise SC prepared for circuit racing, a dedicated time-attack build or a competition car running slicks. Hard-anodized components and titanium hardware keep weight down on a car built around minimal mass, and they resist corrosion through wet race weekends and winter layups. Race dampers work hard and need regular attention. Every Nitron RacePro 3 unit can be fully serviced and rebuilt, and revalving for new tire compounds, aero changes or a different series keeps the kit matched to the car season after season.

Features

Hose reservoir type
16 clicks of high compression
26 clicks of low compression
24 clicks of rebound
Preload adjuster
3-way independent adjustment
Full alloy body
Consists of 4 coilovers, reservoirs, hoses, and mounting brackets (LHD or RHD)
Hand made to order

Specifications

Coilover Type: RacePro 3
Adjustment Type: 3-way independent
Adjustment: 16 clicks of high compression / 26 clicks of low compression / 24 clicks of rebound
Reservoir Type: Hose
Mounting Brackets: Included (LHD or RHD)
Recommended Spring Rates:
- Front: 550lbs/inch (96N/mm)
- Rear: 700lbs/inch (123N/mm)

Applications

Lotus Elise SC: S2 | 2008-2011

Other Suspension Kits for S2 Lotus Elise SC

Notes

Custom spring rates also available, please contact us directly here for more information or for a consultation on custom rates
Images used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

Frequently Asked Questions

How does the Nitron Elise SC RacePro 3 help with exit traction? The Nitron Elise SC RacePro 3 adjusts rebound, low-speed compression and high-speed compression independently at every corner. Rear low-speed compression controls how the supercharged Elise SC squats and loads its rear tires under power, while front rebound controls how quickly the nose unloads. Tuning both lets you balance traction and front grip out of every corner.
What does the 46mm piston do on the Nitron S2 Elise SC RacePro 3? The 46mm piston in the Nitron S2 Elise SC RacePro 3 moves a larger volume of oil for every millimeter of travel. That gives the damper accurate control as loads build under braking, cornering and hard acceleration. Each adjuster click also makes a clear, repeatable change, which helps when you’re fine-tuning how the car puts its power down.
Are mounting brackets included with the Nitron Elise SC RacePro 3? Yes. Mounting brackets are included with every Nitron Elise SC RacePro 3 kit and are supplied to suit your car’s drive side. Select LHD or RHD when ordering, and the kit arrives with the correct brackets to mount the coilovers and reservoirs to the factory double wishbone suspension.
How does the Nitron S2 Elise SC RacePro 3 differ from the NTR-R1 kits? The Nitron S2 Elise SC RacePro 3 is the full-race kit, built around a 46mm piston with independent 3-way adjustment and remote reservoirs. The Nitron NTR-R1 FastRoad and ClubSport kits use a single combined adjuster and no reservoirs, with spring rates aimed at road driving and track days respectively.
How are the reservoirs mounted on the Nitron Elise SC RacePro 3? The Nitron Elise SC RacePro 3 uses hose-mounted reservoirs at both ends, each connected to its damper by a hose. Nitron’s Bi-Axis fittings let each hose leave the damper at the correct angle, so routing past the wishbones, ducting and bodywork stays clean. Plan the reservoir locations so the adjusters are easy to reach between sessions.
How often should the Nitron S2 Elise SC RacePro 3 be rebuilt? Service intervals depend on how hard and how often the car runs. Many race teams rebuild their Nitron S2 Elise SC RacePro 3 dampers between seasons, or sooner on a busy calendar. Every unit is fully serviceable, and revalving can be done at the same time if your tires, aero or series change.

About Nitron Suspension

Nitron Suspension has been at the forefront of precision suspension engineering since 1998, founded by Guy Evans with the goal of building high-performance shocks for enthusiasts and professionals alike. Over 200 dealers now carry Nitron products across Europe, Asia, the US, Australasia, and Africa. In 2008, the company moved into a dedicated facility in the UK’s Motorsport Valley, adding dynamometers, 5-axis CNC machines, and 3D CAD capabilities to support both growing demand and continued product development. A second expansion came in 2023 with a new office in Murrieta, California. The team behind every Nitron product draws from deep backgrounds in machining, materials technology, hydraulics, bike engineering, and F1 racing, with many engineers bringing firsthand experience as competitive drivers and riders. That depth of knowledge across both the technical and competitive sides of motorsport shapes every product Nitron develops.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Nitron RacePro 3 Coilover Kit for S2 Lotus Elise SC [NTCLO019_RP3]

Guaranteed Safe Checkout

Nitron RacePro 3 Coilover Kit for S2 Lotus Elise SC

Specialized Bi-Axis Hose Fittings

Unique Technology

Bespoke Engineering

Features

Specifications

Applications

Other Suspension Kits for S2 Lotus Elise SC

Notes

Frequently Asked Questions

About Nitron Suspension

Reviews