How much wider are the Front Fenders for EG6?

Each fender sits 9 mm wider than the factory part, so the Front Fenders for EG6 add 18 mm across the front of the car. Spoon kept the increase inside the limits of Japanese safety standards, which means an EG6 registered in Japan does not need a structural change inspection after fitting.

Do they look different from the factory fenders?

Yes, but only slightly. Spoon modeled them on the simple factory shape of the EG Civic, the same approach it took with its EG front bumper, so the car keeps its original character. The visible difference is the slightly wider stance at the front, which suits a wheel with a little more width or a lower offset.

Are they a direct replacement?

Yes. Go Tuning describes them as a direct replacement for the factory fenders, so they mount in the factory positions rather than being riveted over the original panels. Because they are FRP and arrive unpainted, the realistic install path is test fit, preparation, paint, then final fitting by a body shop.

What is the Spoon Timeless collection?

Go Tuning uses the name for Spoon parts that have been redeveloped with current engineering methods and technology for older Hondas. The idea is to let owners keep using and enjoying their cars regardless of age, and these EG fenders are one of those parts, shaped to look like the originals.

How should the FRP be prepared for paint?

Spoon uses wax in the molding process, so start by degreasing the fenders thoroughly. Scuff the surface with roughly 800 grit wet paper, then treat any pinholes, scratches or small cracks with polyester putty and surfacer. Trial fit before paint, and let the finish dry without heat to avoid distortion.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Spoon Sports Front Fenders for EG6 Honda Civic

The Spoon Sports Front Fenders for EG6 Honda Civic keep the clean, simple lines Honda gave the EG hatchback and add 9 mm of width per side, enough for a little more wheel and tire while staying within Japanese safety standards, so a car registered in Japan needs no structural change approval. Spoon shaped them to match its EG front bumper, so the two read as one design, and Go Tuning places them in the Spoon Timeless line: parts redeveloped with current engineering methods so older Hondas can stay in use and keep being enjoyed. They are made in Japan in FRP and replace the factory fenders directly. Supplied unpainted, they need proper preparation before paint. These suit an EG6 restoration or a restrained street build where the owner wants a touch more room for wider wheels without the look of bolted-on flares; for large width gains they are the wrong tool.

Features

9 mm wider per side than the factory fender
Styled after the factory EG fender shape
Within Japanese safety standard width limits
Direct replacement for the factory fenders, per Go Tuning
FRP, made in Japan

Applications

Honda Civic SiR: EG6 | 1991-1995 | 1.6L B16A

Notes

The Front Fenders for EG6 are sold as a set
Supplied unpainted in FRP; painting is required
Degrease first, as Spoon uses wax in production, then scuff with roughly 800-grit wet paper and fill pinholes or small cracks with polyester putty and surfacer
Test fit before paint and air dry below 40 degrees Celsius with no booth heat or spot heating
Designed to match the Spoon EG front bumper, which is sold separately

Frequently Asked Questions

How much wider are the Front Fenders for EG6? Each fender sits 9 mm wider than the factory part, so the Front Fenders for EG6 add 18 mm across the front of the car. Spoon kept the increase inside the limits of Japanese safety standards, which means an EG6 registered in Japan does not need a structural change inspection after fitting.
Do they look different from the factory fenders? Yes, but only slightly. Spoon modeled them on the simple factory shape of the EG Civic, the same approach it took with its EG front bumper, so the car keeps its original character. The visible difference is the slightly wider stance at the front, which suits a wheel with a little more width or a lower offset.
Are they a direct replacement? Yes. Go Tuning describes them as a direct replacement for the factory fenders, so they mount in the factory positions rather than being riveted over the original panels. Because they are FRP and arrive unpainted, the realistic install path is test fit, preparation, paint, then final fitting by a body shop.
What is the Spoon Timeless collection? Go Tuning uses the name for Spoon parts that have been redeveloped with current engineering methods and technology for older Hondas. The idea is to let owners keep using and enjoying their cars regardless of age, and these EG fenders are one of those parts, shaped to look like the originals.
How should the FRP be prepared for paint? Spoon uses wax in the molding process, so start by degreasing the fenders thoroughly. Scuff the surface with roughly 800 grit wet paper, then treat any pinholes, scratches or small cracks with polyester putty and surfacer. Trial fit before paint, and let the finish dry without heat to avoid distortion.

About Spoon Sports

Spoon Sports was founded in 1988 in Suginami, Tokyo, by Tatsuru Ichishima, a former Honda race car tester and driver, with backing from Honda and Mugen. The company has raced Hondas from its first season, when Ichishima’s own Civic became the first Civic to enter the Japan Touring Car Championship, and its Type One workshop, opened in 2001, services and tunes the cars its parts are developed on. Spoon builds engine, drivetrain, exhaust, chassis and aero parts for Honda models and proves them on circuits and in endurance racing, including the 25 Hours of Thunderhill.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Spoon Sports Front Fenders for EG6 Honda Civic [60200-EG6-000]

Guaranteed Safe Checkout

Spoon Sports Front Fenders for EG6 Honda Civic

Features

Applications

Notes

Frequently Asked Questions

About Spoon Sports

Reviews