Which Artura body styles does the Spring Kit for McLaren Artura cover?

RYFT names only the Artura for this kit, and the Spider version is not listed separately. The Spider adds a retractable hard top and carries more weight, so Bulletproof Automotive confirms fitment details with RYFT before ordering the Spring Kit for McLaren Artura for an open car.

Why does the Artura get its own spring rates?

The Artura combines a V6, an electric motor and a 7.4 kWh battery on a carbon chassis, so its mass and balance differ from McLaren V8 models. RYFT says each kit is application specific with custom spring rates, which is why it sells a separate kit for this car.

Can the stance be adjusted once fitted?

Yes. RYFT includes adjustable ride height among the features of the kit, so the installer can set the final height on the car and adjust it later. An alignment should be done after any change so camber and toe stay within specification.

Who should install the Artura spring kit?

A McLaren specialist or a suspension shop that works on high voltage hybrids. The Artura has a battery pack and electric drive components on board, and the job ends with corner height measurement and a full alignment, which needs proper equipment.

Which RYFT parts pair with the Artura kit?

RYFT brings the look of a GT4 race car to the Artura with a carbon front splitter, side skirts, diffuser, rear GT wing and more, and it builds a titanium race exhaust for the car. A lower stance suits that motorsport look, though splitter clearance should be checked.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

RYFT Performance Spring Kit for McLaren Artura

RYFT’s spring kit for McLaren Artura coupes is matched to McLaren’s plug-in hybrid V6 supercar, built on the McLaren Carbon Lightweight Architecture with a 3.0 liter M630 twin-turbo V6 and an axial flux electric motor. RYFT developed it with Moton Suspension. We see it as the right choice for an Artura owner who wants the car lower and tidier over its wheels for street use.

Development

The Artura carries a 7.4 kWh battery and introduced a new multi-link rear suspension that McLaren says raises toe stiffness by 75 percent. RYFT sets its own rates for this car and says its kits are built for racing stresses while staying comfortable on the street. Its dealers describe cold wound high-carbon steel springs and billet 7075-T6 aluminum adjusters.

Features

Rates RYFT developed for the Artura and its hybrid weight
Adjustable ride height
High-carbon steel springs, cold wound and then stress relieved
Lightweight billet 7075-T6 aluminum hardware
Complements the RYFT Artura GT4-inspired carbon program

Applications

McLaren Artura: 2023-present | 3.0L M630 twin-turbo V6 plug-in hybrid

Notes

RYFT lists the Spring Kit for McLaren Artura without naming the Artura Spider
RYFT does not publish ride height change, spring rates or damper details for the Artura kit
For sound, see the RYFT Titanium Race Exhaust for McLaren Artura
Aero and trim are in the RYFT Artura range

Frequently Asked Questions

Which Artura body styles does the Spring Kit for McLaren Artura cover? RYFT names only the Artura for this kit, and the Spider version is not listed separately. The Spider adds a retractable hard top and carries more weight, so Bulletproof Automotive confirms fitment details with RYFT before ordering the Spring Kit for McLaren Artura for an open car.
Why does the Artura get its own spring rates? The Artura combines a V6, an electric motor and a 7.4 kWh battery on a carbon chassis, so its mass and balance differ from McLaren V8 models. RYFT says each kit is application specific with custom spring rates, which is why it sells a separate kit for this car.
Can the stance be adjusted once fitted? Yes. RYFT includes adjustable ride height among the features of the kit, so the installer can set the final height on the car and adjust it later. An alignment should be done after any change so camber and toe stay within specification.
Who should install the Artura spring kit? A McLaren specialist or a suspension shop that works on high voltage hybrids. The Artura has a battery pack and electric drive components on board, and the job ends with corner height measurement and a full alignment, which needs proper equipment.
Which RYFT parts pair with the Artura kit? RYFT brings the look of a GT4 race car to the Artura with a carbon front splitter, side skirts, diffuser, rear GT wing and more, and it builds a titanium race exhaust for the car. A lower stance suits that motorsport look, though splitter clearance should be checked.

About RYFT

RYFT is an American performance house building titanium exhausts, carbon fiber exterior parts and spring kits for Ferrari, Lamborghini, McLaren, Porsche, Audi and Chevrolet performance vehicles. Its titanium exhausts are made by hand around RYFT’s proprietary velocity loops, its carbon fiber exterior parts are made in exposed weave for specific models, and its spring kits are developed with Moton Suspension. The HYPR Titanium system for the Lamborghini Revuelto is designed, tested and manufactured in the USA with 3D-printed titanium collectors and tips.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

RYFT Performance Spring Kit for McLaren Artura [29-70-6002]

Guaranteed Safe Checkout

RYFT Performance Spring Kit for McLaren Artura

Development

Features

Applications

Notes

Frequently Asked Questions

About RYFT

Reviews