Does the Front Splitter for McLaren Artura fit the Artura Spider?

RYFT lists the splitter for the McLaren Artura and does not name the Spider, which arrived for the 2025 model year with a retractable hard top. Launch coverage places the main body changes of the open car at the buttresses and rear deck, yet Bulletproof Automotive confirms fitment details with RYFT before ordering a splitter for a Spider.

Is the splitter based on the Artura GT4 race car?

Yes. RYFT describes its Artura parts as motorsport inspired and aimed at the look of a factory GT4 race car. McLaren Motorsport built the Artura GT4 with its own splitter and dive planes, and the RYFT Front Splitter for McLaren Artura translates that idea into a road part in two by two twill carbon.

Will a splitter make the Artura more likely to scrape?

Yes, it can. Extending the lower edge of the nose reduces the margin over steep ramps, speed humps and parking blocks, so drivers should approach them at an angle and slowly. Clear protection film on the leading edge takes most of the light contact and keeps the twill looking clean.

Is the carbon on the splitter exposed?

Yes. RYFT lists a two by two twill weave for the Artura splitter and shows it in exposed carbon with a clear finish, which gives the diagonal pattern typical of twill. Painting it is possible at a body shop, but the visible weave is the point of the GT4 inspired look for most owners.

Should a specialist install the splitter?

Yes. The splitter is aligned to the lower edge of the bumper on a car that sits low, and correct fitting needs a proper lift, care around the paint and a check that the gap is even across the full width. A shop experienced with McLaren bodywork is the right choice.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

RYFT Carbon Fiber Front Splitter for McLaren Artura

RYFT’s carbon fiber front splitter for McLaren Artura owners is the clearest statement of what RYFT set out to do with this car: give the road Artura the look of the factory GT4 racer that McLaren Motorsport built on the same model. The Artura GT4 wears its own splitter and dive planes, and RYFT echoes that image with extended curved surfaces at the front. We rate it as the first part to buy for a RYFT Artura, because the nose is where the GT4 reference reads most clearly.

Motorsport Link

McLaren unveiled the Artura GT4 at the Goodwood Festival of Speed in June 2022 as the successor to the 570S GT4, and it raced for the first time at Daytona in January 2023 in the IMSA Michelin Pilot Challenge. That car runs the twin-turbo V6 of the road car without the hybrid system, which GT4 rules do not allow, and carries a dedicated splitter, dive planes and ducts in the hood. RYFT, which files this part as a race splitter, brings that extended front edge to the street car in 2×2 twill carbon.

Features

2×2 twill carbon fiber, the weave RYFT lists for its Artura parts
Extended curved surfaces at the front, following the RYFT Artura design
Styled after the McLaren Artura GT4 race car
Front anchor for the RYFT side skirts and rear diffuser

Applications

McLaren Artura: MCLA | 2023-present | 3.0L M630 twin-turbo V6 plug-in hybrid

Notes

RYFT lists this front splitter for McLaren Artura cars and does not name the Artura Spider
RYFT publishes no weight or clearance figure for this splitter
Carry the carbon rearward with the RYFT Carbon Fiber Side Skirts for McLaren Artura
Browse the RYFT Artura range

Frequently Asked Questions

Does the Front Splitter for McLaren Artura fit the Artura Spider? RYFT lists the splitter for the McLaren Artura and does not name the Spider, which arrived for the 2025 model year with a retractable hard top. Launch coverage places the main body changes of the open car at the buttresses and rear deck, yet Bulletproof Automotive confirms fitment details with RYFT before ordering a splitter for a Spider.
Is the splitter based on the Artura GT4 race car? Yes. RYFT describes its Artura parts as motorsport inspired and aimed at the look of a factory GT4 race car. McLaren Motorsport built the Artura GT4 with its own splitter and dive planes, and the RYFT Front Splitter for McLaren Artura translates that idea into a road part in two by two twill carbon.
Will a splitter make the Artura more likely to scrape? Yes, it can. Extending the lower edge of the nose reduces the margin over steep ramps, speed humps and parking blocks, so drivers should approach them at an angle and slowly. Clear protection film on the leading edge takes most of the light contact and keeps the twill looking clean.
Is the carbon on the splitter exposed? Yes. RYFT lists a two by two twill weave for the Artura splitter and shows it in exposed carbon with a clear finish, which gives the diagonal pattern typical of twill. Painting it is possible at a body shop, but the visible weave is the point of the GT4 inspired look for most owners.
Should a specialist install the splitter? Yes. The splitter is aligned to the lower edge of the bumper on a car that sits low, and correct fitting needs a proper lift, care around the paint and a check that the gap is even across the full width. A shop experienced with McLaren bodywork is the right choice.

About RYFT

RYFT is an American performance house building titanium exhausts, carbon fiber exterior parts and spring kits for Ferrari, Lamborghini, McLaren, Porsche, Audi and Chevrolet performance vehicles. Its titanium exhausts are made by hand around RYFT’s proprietary velocity loops, its carbon fiber exterior parts are made in exposed weave for specific models, and its spring kits are developed with Moton Suspension. The HYPR Titanium system for the Lamborghini Revuelto is designed, tested and manufactured in the USA with 3D-printed titanium collectors and tips.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

RYFT Carbon Fiber Front Splitter for McLaren Artura [29-20-1026]

Guaranteed Safe Checkout

RYFT Carbon Fiber Front Splitter for McLaren Artura

Motorsport Link

Features

Applications

Notes

Frequently Asked Questions

About RYFT

Reviews