What comes in the CAN Flex Fuel Package NIS-005?

The CAN Flex Fuel Package NIS-005 contains seven COBB products: the AP3-NIS-005 Accessport V3, the powdercoated aluminum Big SF Intake System, a High Flow Fuel Pump Kit, the CAN Gateway Module, the Gateway Harness and Bracket Kit, the CAN Gateway Flex Fuel Kit with its ethanol sensor, and a COBB Vehicle Badge for the car.

Is this kit street legal in California?

No. COBB states that it is not legal for sale or use in California on any emission controlled motor vehicle, and that testing with the California Air Resources Board is pending. Outside California, COBB supports on-street sale through SEMA Garage Emissions Certification SC-COB01-0086 in states that accept the Clean Air Act and EPA Anti-Tampering Policy.

Is there an off the shelf flex fuel map for this setup?

Yes. COBB lists a Stage 1+ Big SF Flex Fuel map for the 005 and 006 Accessports, matched to this intake and gateway hardware. Owners with further modifications can have a COBB Protuner build a custom map and load it through the same Accessport.

Which GT-R models will accept this package?

COBB confirms USDM R35 cars from 2009 through 2014, JDM cars from 2008 through 2013, and ADM, East Asia, EDM, Gulf Spec and South Africa cars from 2009 through 2013, plus 2009 and 2010 Vspec models. Later cars use the NIS-007 kits.

Can I add fuel pressure monitoring later?

Yes. The CAN Gateway in this kit also accepts the separate CAN Gateway Fuel Pressure Monitoring Kit, which places a COBB 0-150 psi sensor at the factory fuel rail. COBB sells a package that includes it and lists custom tuning as a requirement once that pressure kit is fitted.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

COBB Tuning Stage 1+ CAN Flex Fuel Package NIS-005 for R35 Nissan GT-R

COBB Tuning’s CAN Flex Fuel Package NIS-005 readies a 2009-2014 R35 GT-R for gasoline through E85,, with a CAN Gateway reporting measured ethanol content to the ECU. The AP3-NIS-005 Accessport V3 and aluminum Big SF Intake form the Stage 1+ base, and a High Flow Fuel Pump Kit adds the volume ethanol demands. Buy it with a dependable E85 pump nearby; owners staying on gasoline should choose the plain Stage 1+ package.

Flex Fuel Hardware

The ethanol sensor sits on a powder-coated billet bracket, plumbed with E85-compatible SAE 30R9 hose and a PTFE-lined -6AN line to the factory rails, which stay along with the stock regulator. Since the Gateway sends ethanol content digitally, the CAN Flex Fuel Package NIS-005 takes over no factory 0-5V input.

Features

Mandrel bent 3.0 inch aluminum Big SF tubing finished in wrinkle black powdercoat
Custom K&N cone filter elements with 3-ply steel reinforced silicone couplers
Larger tubing gives the factory MAF sensors more airflow headroom
Knock indicator and boost gauge past 20 psi on the factory display
COBB Fast ECU Flashing completes a map change in 40 seconds or less

What’s Included

Accessport V3 (AP3-NIS-005)
Big SF Intake System (7C1150)
High Flow Fuel Pump Kit (3C1450)
CAN Gateway Module (860600)
CAN Gateway Harness and Bracket Kit (3C16RL)
CAN Gateway Flex Fuel Kit (3C1700)
COBB Vehicle Badge (800200)

Applications

Nissan GT-R: R35 | 2009-2014 | USDM
Nissan GT-R: R35 | 2008-2013 | International markets (JDM 2008-2013; ADM, East Asia, EDM, Gulf Spec and South Africa 2009-2013)
Nissan GT-R Vspec: R35 | 2009-2010 | EDM, Gulf Spec and JDM (including Vspec Race)

Notes

Not legal for sale or use in California on any emission controlled motor vehicle; CARB testing is pending
The CAN Gateway Fuel Pressure Monitoring Kit is not part of this package
The CAN Flex Fuel Package NIS-005 needs a flex fuel calibration on the Accessport before running ethanol
The AP3-NIS-005 does not flash the transmission or offer adjustable launch control
Confirm left or right hand drive for the Gateway harness kit

Frequently Asked Questions

What comes in the CAN Flex Fuel Package NIS-005? The CAN Flex Fuel Package NIS-005 contains seven COBB products: the AP3-NIS-005 Accessport V3, the powdercoated aluminum Big SF Intake System, a High Flow Fuel Pump Kit, the CAN Gateway Module, the Gateway Harness and Bracket Kit, the CAN Gateway Flex Fuel Kit with its ethanol sensor, and a COBB Vehicle Badge for the car.
Is this kit street legal in California? No. COBB states that it is not legal for sale or use in California on any emission controlled motor vehicle, and that testing with the California Air Resources Board is pending. Outside California, COBB supports on-street sale through SEMA Garage Emissions Certification SC-COB01-0086 in states that accept the Clean Air Act and EPA Anti-Tampering Policy.
Is there an off the shelf flex fuel map for this setup? Yes. COBB lists a Stage 1+ Big SF Flex Fuel map for the 005 and 006 Accessports, matched to this intake and gateway hardware. Owners with further modifications can have a COBB Protuner build a custom map and load it through the same Accessport.
Which GT-R models will accept this package? COBB confirms USDM R35 cars from 2009 through 2014, JDM cars from 2008 through 2013, and ADM, East Asia, EDM, Gulf Spec and South Africa cars from 2009 through 2013, plus 2009 and 2010 Vspec models. Later cars use the NIS-007 kits.
Can I add fuel pressure monitoring later? Yes. The CAN Gateway in this kit also accepts the separate CAN Gateway Fuel Pressure Monitoring Kit, which places a COBB 0-150 psi sensor at the factory fuel rail. COBB sells a package that includes it and lists custom tuning as a requirement once that pressure kit is fitted.

About COBB Tuning

COBB Tuning was founded by Trey Cobb in 1999 in Rockwall, Texas, as a Subaru performance shop in the back of his father’s tire shop, and is now headquartered in Austin, Texas. In 2004 COBB introduced the Accessport, a handheld ECU tuning device that flashes COBB’s off-the-shelf maps or a custom tune and doubles as a real-time gauge and datalogger. The range has since grown from Subaru to Ford, Volkswagen, Audi, Porsche, Nissan, Honda, Mazda, Mitsubishi and Toyota platforms, with intakes, intercoolers, exhausts and flex fuel kits engineered alongside the tuning, and many COBB parts carry California Air Resources Board Executive Order numbers for use in all 50 states.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

COBB Tuning Stage 1+ CAN Flex Fuel Package NIS-005 for R35 Nissan GT-R [NIS005001PFF]

Guaranteed Safe Checkout

COBB Tuning Stage 1+ CAN Flex Fuel Package NIS-005 for R35 Nissan GT-R

Flex Fuel Hardware

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About COBB Tuning

Reviews