Do the Endless Brake Pads for DE5 Type S fit the standard Integra?

No. Endless lists EP357 front and EP524 rear for the Type S only, which Acura builds with Brembo four-piston monobloc front calipers and 13.8-inch two-piece front rotors. The 1.5-liter Integra is not on the Endless list for these shapes, so the Endless Brake Pads for DE5 Type S cars should not be ordered for it.

Are these the same pads Endless lists for the Civic Type R?

Yes. Endless lists the same two shapes, EP357 at the front and EP524 at the rear, for the Integra Type S and for the FK8 and FL5 Civic Type R, so the compounds and prices on this listing match those cars. A Type S fitted with an aftermarket big brake kit is the exception and needs the pads for those calipers.

Which compound suits a Type S at track days?

MX72 Plus is our choice for a Type S on street tires at track days, holding its braking force to 750C, or 1382F, with a consistent pedal release. Owners who run sticky tires or long sessions every month move to CC-Rg, rated to 800C, or 1472F, which Endless notes is noisy on the street. Race-prepared cars go on to the racing compounds.

Will Endless street pads add dust or noise on a daily driven Type S?

No, not in SSS or SSM Plus. SSS is rated for exceptionally low dust and long rotor life, and SSM Plus for low dust and low noise, with braking that builds with pedal pressure. MX72 and MX72 Plus keep dust and noise to a minimum too. Among the street-capable compounds, only CC-Rg comes with a noise warning from Endless.

Can MA45B be fitted at both ends of a Type S?

Yes. Endless prices MA45B for both EP357 and EP524, so this listing offers it front, rear or as a Front and Rear Set. MA45B is the endurance compound Endless says most Nurburgring and Spa 24 Hours entrants run, stable through a whole race. On a road car it is overkill, and like every racing compound it needs the Endless bedding procedure.

Endless Brake Pads for DE5 Acura Integra Type S

Endless’s Brake Pads for DE5 Acura Integra Type S take EP357 at the front and EP524 at the rear, the same two shapes Endless lists for the FK8 and FL5 Civic Type R. Acura gave the 320-horsepower Type S Brembo four-piston monobloc front calipers over 13.8-inch two-piece rotors, and Endless lists these shapes for the Type S only, not the 1.5-liter Integra. Every option on this listing comes for both axles, from SSS for clean daily use to MA45B for endurance racing. For a Type S that commutes and does track days on street tires, MX72 Plus is where we would start.

Features

Endless pad shapes EP357 front and EP524 rear
Five street and street-to-track compounds alongside eleven racing compounds
Racing compounds offered as Racing Group, W003 Group and MA45B
SSM Plus, MX72, MX72 Plus and CC-Rg front and rear sets at Endless combo-set prices
Every compound, MA45B included, available for the front axle, the rear axle or both

Choosing a Compound

On the Type S, compound choice follows how the car is used. SSS and SSM Plus are for an owner who wants a quiet commute and clean wheels. MX72 handles spirited road driving with the odd track day, MX72 Plus covers regular track days on street tires, and CC-Rg is for an owner who laps often and accepts more noise in traffic. The racing compounds belong on a car prepared for events. W007 and W008, which Endless prices for EP357 and EP524, are left off because Endless designs both for carbon ceramic rotors, and the Type S runs iron rotors.

Every figure below is Endless’s own. Friction is the compound’s average friction coefficient, so a higher number gives more bite for the same pedal pressure. The rotor range is the band of rotor temperatures Endless designs the compound to work in, so choose by the temperatures your car will see.

Street and street-to-track compounds

SSS (street): non-asbestos; friction 0.38-0.45; rotor range 0-480C (32-896F). Low wear, long rotor life, a strong initial response and exceptionally low dust, built for road and highway driving.
SSM Plus (street): non-asbestos; friction 0.33-0.40; rotor range 0-550C (32-1022F). Low dust, low noise and long life. Braking builds with pedal pressure rather than a sharp first bite, for drivers who want clean wheels and a quiet car.
MX72 (street to light track): ceramic carbon metal; friction 0.37-0.47; rotor range 50-700C (122-1292F). Minimal noise and dust, strong friction at low temperatures, reduced rotor wear and a better pedal feel than a typical semi-metallic pad. Endless’s dual-duty compound for a road car that sees the occasional track day.
MX72 Plus (street to circuit): ceramic carbon metal; friction 0.39-0.47; rotor range 50-750C (122-1382F). Holds its braking force to higher temperatures than MX72, with stable control and a consistent pedal release. Endless aims it at cars on street tires that run on track.
CC-Rg (track day, street capable): ceramic carbon metal; friction 0.38-0.45; rotor range 50-800C (122-1472F). High initial bite across a wide temperature range, even when cold, and modulation that works with the factory ABS under hard use. Endless notes it is noisy on the street; it is the step up from MX72 Plus for regular track days.

Racing compounds

Each option below is one choice in the Choose Compound menu. For a group, name your compound in the order notes and Bulletproof Automotive confirms it with your order. Every racing compound needs Endless’s bedding procedure: at 70 to 80 percent of normal pedal effort, bring the rotors gradually to 400C (752F), then let them cool below 150C (302F) before hard use.

Racing Group

ME22: dual braking style; friction 0.33-0.38; rotor range 150-800C (302-1472F). Developed from ME20 with lower friction for control, for light to mid-weight cars or heavier cars on slower circuits. Endless rates it for street and track.
ME20: trail-braking style; rotor range 150-800C (302-1472F). High, stable friction at high temperature with low wear, developed for touring cars and rally. Works front or rear, with stock or racing ABS.
N35S: trail-braking style; rotor range 300-800C (572-1472F). Quick, sharp and responsive, with stable modulation under high temperature and load. Endless’s flagship rally compound, also run in FIA GT, and its suggested starting point for drivers new to Endless racing pads.
N05U: trail-braking style; friction 0.46-0.53; rotor range 300-800C (572-1472F). More bite than N35S, popular in sprint-focused Porsche Cup cars.
N05S: trail-braking style; friction 0.45-0.53; rotor range 300-800C (572-1472F). Immediate high friction with little pedal effort, used in Japanese rally cars without brake boosters and in European and Australian sprint racing.
N30C: friction 0.50-0.60; rotor range 300-800C (572-1472F). High initial bite, gentle on rotors and low wear. A rally compound for cars without a brake booster.
S55G: Endless publishes no figures. It suits lightweight and front-wheel-drive cars, and the rear of front-wheel-drive cars, with high controllability.
PC35: Endless publishes no figures. More bite than N35S with high braking force and a stable pedal; Endless’s base pad for rally raid.

W003 Group

W003: trail-braking style; friction 0.40-0.45. Similar in character to N35S with better wear, tough and stable at high temperature with a linear torque curve; run in rally, touring cars, ALMS and PWC. Circuit only: Endless does not recommend it for the street and notes high rotor wear when cold.
S330: trail-braking style; friction 0.60-0.70; rotor range 300-850C (572-1562F). High friction for sprint racing, with good control at high levels and without accelerating rotor wear; run in Super GT, stock cars and GT2 and GT3 sprint racing.

Sold as its own option

MA45B: standard braking style; rotor range 300-800C (572-1472F). Endless’s endurance compound: low friction but stable for a whole race, with excellent heat resistance and wear. Most Nurburgring and Spa 24 Hours entrants run it.

Applications

Acura Integra Type S: DE5 | 2024-present | 2.0L Turbo

Notes

Each Front or Rear set of Brake Pads for DE5 Type S cars covers both wheels on one axle
In SSM Plus, MX72, MX72 Plus and CC-Rg, the Front and Rear Set is an Endless combo set, priced below the two axles bought separately
For the Type S with its factory Brembo front calipers; Endless does not list these shapes for the 1.5-liter Integra
For the factory brakes; a Type S converted to an aftermarket big brake kit takes the pads for those calipers

Frequently Asked Questions

Do the Endless Brake Pads for DE5 Type S fit the standard Integra? No. Endless lists EP357 front and EP524 rear for the Type S only, which Acura builds with Brembo four-piston monobloc front calipers and 13.8-inch two-piece front rotors. The 1.5-liter Integra is not on the Endless list for these shapes, so the Endless Brake Pads for DE5 Type S cars should not be ordered for it.
Are these the same pads Endless lists for the Civic Type R? Yes. Endless lists the same two shapes, EP357 at the front and EP524 at the rear, for the Integra Type S and for the FK8 and FL5 Civic Type R, so the compounds and prices on this listing match those cars. A Type S fitted with an aftermarket big brake kit is the exception and needs the pads for those calipers.
Which compound suits a Type S at track days? MX72 Plus is our choice for a Type S on street tires at track days, holding its braking force to 750C, or 1382F, with a consistent pedal release. Owners who run sticky tires or long sessions every month move to CC-Rg, rated to 800C, or 1472F, which Endless notes is noisy on the street. Race-prepared cars go on to the racing compounds.
Will Endless street pads add dust or noise on a daily driven Type S? No, not in SSS or SSM Plus. SSS is rated for exceptionally low dust and long rotor life, and SSM Plus for low dust and low noise, with braking that builds with pedal pressure. MX72 and MX72 Plus keep dust and noise to a minimum too. Among the street-capable compounds, only CC-Rg comes with a noise warning from Endless.
Can MA45B be fitted at both ends of a Type S? Yes. Endless prices MA45B for both EP357 and EP524, so this listing offers it front, rear or as a Front and Rear Set. MA45B is the endurance compound Endless says most Nurburgring and Spa 24 Hours entrants run, stable through a whole race. On a road car it is overkill, and like every racing compound it needs the Endless bedding procedure.

About Endless

Endless is a Japanese brake manufacturer that designs everything in-house and manufactures domestically in Japan, holding surface accuracy to 1/1000mm under strict quality control. The company developed its own laminated sintered wire-mesh backing plate and ceramic carbon rotors, and it proves its parts in competition, running its own factory motorsport program and supplying winning teams across Japanese and European racing. From pads and slit rotors to forged and monobloc calipers, brake fluid, and lines, Endless builds braking systems trusted on both street and circuit.

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.