Will the Front Camber Plate Assembly for A90 fit my coilovers?

Yes, if your coilovers reuse the OEM top hat. The Front Camber Plate Assembly for A90 replaces the factory top hats directly, and Verus Engineering confirms fitment with Bilstein, KW and MCS coilovers. Ohlins Road and Track coilovers need a taller bushing, so contact us first, and coilovers that use their own top mounts are not compatible.

How much camber do the Verus plates allow?

Up to -3 degrees of negative camber, depending on your suspension setup, according to Verus Engineering. The rest of the suspension decides how much of that range a given car can use. Adjustment is quick and easy, and an alignment shop should set the final figure to match how and where the Supra is driven.

Do the camber plates change ride height?

No. Verus Engineering designed the plates as direct replacements for the OEM top hats with the same installed height as the factory units, so fitting them does not raise or lower the car. That makes them a good match for owners running OE or aftermarket springs on factory dampers who want more front tire performance without changing the stance.

Why run negative camber on a track car?

During cornering the tire tends to roll onto its outer edge. Negative camber tilts the top of the wheel inward to counter that, keeping more of the tread on the road through the turn for more grip and higher cornering speed. Verus Engineering notes that negative camber is generally desired on track cars, which is where these plates deliver the most.

What bearing do the Verus camber plates use?

Each plate carries a wide series spherical bearing with a PTFE liner and a high-strength alloy steel race. Verus Engineering chose high-end wide body spherical bearings to sharpen driver feel and connection with the road without sacrificing longevity, and supplies the spherical bushings, nuts and lock nuts with the assembled left and right plates.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Front Camber Plate Assembly for A90 Toyota GR Supra

Verus Engineering’s Front Camber Plate Assembly for A90 Toyota GR Supra replaces the factory front top hats with billet plates that allow up to -3 degrees of camber, depending on the suspension setup, so the front tires keep more rubber on the road through a corner. The plates retain the installed height of the OEM top hats and suit factory or aftermarket springs on the factory dampers, as well as coilovers that reuse the OEM top hat. Negative camber pays off in hard cornering, so this is a track-oriented part first.

Construction

Each plate is machined in-house in Indianapolis from billet 6061-T6 aluminum and anodized for corrosion resistance. A wide series spherical bearing with a PTFE liner and a high-strength alloy steel race reduces compliance for more feel behind the wheel without giving up longevity, clinch press-in studs make the install OEM-like, and the design saves more than half a pound per side.

Features

Up to -3 degrees of front camber, depending on the setup
Quick and easy adjustment
Lightweight, saving over 1/2 lb per side
Reduced compliance for an enhanced feel behind the wheel
Stainless hardware, anodized in blue, black or red

What’s Included

Assembled camber plates (L/R)
Spherical bushings (x2)
Spherical nuts (x2)
Spherical lock nuts (x2)
Hardware bag with all nuts and bolts for the install

Applications

Toyota GR Supra: A90 | 2020-2026

Notes

The Front Camber Plate Assembly for A90 works only with suspension that uses the OEM top hats
Verus confirms fitment with Bilstein, KW and MCS coilovers; Ohlins Road and Track coilovers need a taller bushing, so contact us before ordering for that setup
The camber available depends on the rest of the suspension, with -3 degrees as the maximum Verus quotes
Fit the plates with the Verus install manual and video, then have the alignment set
See every Verus Engineering part for the A90 Toyota GR Supra
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Will the Front Camber Plate Assembly for A90 fit my coilovers? Yes, if your coilovers reuse the OEM top hat. The Front Camber Plate Assembly for A90 replaces the factory top hats directly, and Verus Engineering confirms fitment with Bilstein, KW and MCS coilovers. Ohlins Road and Track coilovers need a taller bushing, so contact us first, and coilovers that use their own top mounts are not compatible.
How much camber do the Verus plates allow? Up to -3 degrees of negative camber, depending on your suspension setup, according to Verus Engineering. The rest of the suspension decides how much of that range a given car can use. Adjustment is quick and easy, and an alignment shop should set the final figure to match how and where the Supra is driven.
Do the camber plates change ride height? No. Verus Engineering designed the plates as direct replacements for the OEM top hats with the same installed height as the factory units, so fitting them does not raise or lower the car. That makes them a good match for owners running OE or aftermarket springs on factory dampers who want more front tire performance without changing the stance.
Why run negative camber on a track car? During cornering the tire tends to roll onto its outer edge. Negative camber tilts the top of the wheel inward to counter that, keeping more of the tread on the road through the turn for more grip and higher cornering speed. Verus Engineering notes that negative camber is generally desired on track cars, which is where these plates deliver the most.
What bearing do the Verus camber plates use? Each plate carries a wide series spherical bearing with a PTFE liner and a high-strength alloy steel race. Verus Engineering chose high-end wide body spherical bearings to sharpen driver feel and connection with the road without sacrificing longevity, and supplies the spherical bushings, nuts and lock nuts with the assembled left and right plates.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Front Camber Plate Assembly for A90 Toyota GR Supra

Guaranteed Safe Checkout

Verus Engineering Front Camber Plate Assembly for A90 Toyota GR Supra

Construction

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews