Does the Top Fender Vent Kit for A90 include the lower vent pieces?

No. The Top Fender Vent Kit for A90 contains the left and right upper vents, one cut template and two pieces of 3M VHB tape cut to shape. Verus Engineering supplies the lower assemblies only in its full four-piece kit, where they finish the openings for a clean look with the hood up. They are not needed for cooling or downforce.

Do the top vents work without the bottom assemblies?

Yes. Verus Engineering states the bottom units are not necessary for owners after function alone. The top vents release the high-pressure air trapped in the front wheel wells, which reduces front-end lift and helps the cooling stack, and Verus reports that its CFD and on-track data showed a dramatic drop in underhood temperatures.

Is cutting required to install the top vents?

Yes. Each vent fits into an opening cut in the hood, and the kit supplies a cut template to mark it accurately before the carbon vent is bonded in place with the pre-cut 3M VHB tape. Verus Engineering publishes an install video, and the job is shorter than the full kit because there are no lower assemblies to fit.

Which Verus fender vent kit should I choose?

Choose by how the car is used. The top-only kit delivers the cooling and downforce benefit for less money and less installation work, which suits a dedicated track Supra. The four-piece kit adds lower assemblies from Verus Engineering that hide the cut edges and finish the engine bay, which matters to owners who often show the car with the hood open.

What are the top fender vents made from?

Both vents are pre-preg carbon fiber in a 2x2 twill, autoclave cured and given an automotive high-gloss clear. Verus Engineering contoured them from scan data of the Mk5 Supra hood for a factory-like fit, and supplies 3M VHB double-sided tape cut to the outline of each vent so they bond in without fasteners.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Carbon Cooling Top Fender Vent Kit for A90 Toyota GR Supra

Verus Engineering’s Carbon Cooling Top Fender Vent Kit for A90 Toyota GR Supra supplies the two upper vents from the Verus fender vent system and leaves out the lower assemblies, which Verus says exist for hood-up looks and to hide cut edges, not for performance. Verus introduced this format after owners asked for it. It is the sensible choice for a track Supra where function and budget come first, and the full four-piece kit remains the pick for a car that is shown with the hood open.

Performance

The A90 traps air in its front fender wells, and the pressure that builds there lifts the nose and slows the cooling stack. The top vents let that air out, adding front downforce and improving lift-to-drag efficiency over closed fender wells, and Verus reports from CFD and on-track data that they dramatically reduce underhood temperatures. Each vent is 2×2 twill pre-preg carbon under an automotive high-gloss clear, contoured from scan data to the hood.

Features

Releases wheel well pressure for better cooling
Adds front-end downforce
Factory-like fit to the hood contours
Shorter install with no lower assemblies to fit
Shaped 3M VHB tape for each vent

What’s Included

Carbon cooling fender vents, top (L/R)
3M VHB double-sided tape, cut to shape (x2)
Cut template

Applications

Toyota GR Supra: A90 | 2020-2026

Notes

The bottom vent assemblies are not included, so the cut edges of the openings remain visible with the hood raised
The hood must be cut to fit the vents, using the supplied template; Verus publishes an install video
The Top Fender Vent Kit for A90 is the upper half of the Carbon Cooling Fender Vent Kit for A90 Toyota GR Supra, which adds the lower assemblies
See every Verus Engineering part for the A90 Toyota GR Supra
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Does the Top Fender Vent Kit for A90 include the lower vent pieces? No. The Top Fender Vent Kit for A90 contains the left and right upper vents, one cut template and two pieces of 3M VHB tape cut to shape. Verus Engineering supplies the lower assemblies only in its full four-piece kit, where they finish the openings for a clean look with the hood up. They are not needed for cooling or downforce.
Do the top vents work without the bottom assemblies? Yes. Verus Engineering states the bottom units are not necessary for owners after function alone. The top vents release the high-pressure air trapped in the front wheel wells, which reduces front-end lift and helps the cooling stack, and Verus reports that its CFD and on-track data showed a dramatic drop in underhood temperatures.
Is cutting required to install the top vents? Yes. Each vent fits into an opening cut in the hood, and the kit supplies a cut template to mark it accurately before the carbon vent is bonded in place with the pre-cut 3M VHB tape. Verus Engineering publishes an install video, and the job is shorter than the full kit because there are no lower assemblies to fit.
Which Verus fender vent kit should I choose? Choose by how the car is used. The top-only kit delivers the cooling and downforce benefit for less money and less installation work, which suits a dedicated track Supra. The four-piece kit adds lower assemblies from Verus Engineering that hide the cut edges and finish the engine bay, which matters to owners who often show the car with the hood open.
What are the top fender vents made from? Both vents are pre-preg carbon fiber in a 2×2 twill, autoclave cured and given an automotive high-gloss clear. Verus Engineering contoured them from scan data of the Mk5 Supra hood for a factory-like fit, and supplies 3M VHB double-sided tape cut to the outline of each vent so they bond in without fasteners.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Carbon Cooling Top Fender Vent Kit for A90 Toyota GR Supra [A0797A]

Guaranteed Safe Checkout

Verus Engineering Carbon Cooling Top Fender Vent Kit for A90 Toyota GR Supra

Performance

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews