Does the Fender Vent Kit for A90 require cutting?

Yes. The Fender Vent Kit for A90 sits in openings cut into the hood above each front wheel, and Verus Engineering supplies three cutting templates so the openings match the vents. The carbon parts then bond in place with 3M VHB tape cut to shape, following the Verus install manual and video.

What is the difference between this kit and the top vents only kit?

This kit includes upper and lower assemblies for both sides. Verus Engineering says the lower pieces finish the installation for hood-up appearance by covering the cut edges, and its four-piece design fills the void between the fender liner and the fender top. The top-only kit keeps the cooling and downforce function at a lower price, with cut edges visible.

Do fender vents add downforce on the Supra?

Yes. Verus Engineering found that the Mk5 Supra traps airflow inside its front fender wells, building high pressure that causes front-end lift. Venting that pressure reduces lift and adds front downforce, and Verus says the vents also make the front splitter work harder on its suction side. Its CFD and on-track data agree closely on the result.

Can debris get into the engine bay through the vents?

No, according to Verus Engineering. Some fender vent kits leave a void between the fender liner and the top of the fender, which lets rocks and road debris reach the engine bay. The Verus four-piece design fills that void, so the vents release wheel well pressure without opening a path for stones into the bay.

What are the Verus fender vents made from?

All four pieces are 2x2 twill pre-preg carbon fiber, autoclave cured and finished in an automotive high-gloss clear. Verus Engineering shaped them from scan data of the Mk5 Supra so they follow the contours of the hood with an OEM-plus fit, and the kit includes 3M VHB double-sided tape cut to the shape of each part.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Carbon Cooling Fender Vent Kit for A90 Toyota GR Supra

Verus Engineering’s Carbon Cooling Fender Vent Kit for A90 Toyota GR Supra opens the top of each front fender so the high-pressure air the Supra traps in its wheel wells can escape. Releasing that pressure reduces front-end lift and lets the cooling stack work more effectively, and Verus adds that the vents make the front splitter work harder on its suction side. This four-piece version suits the owner who wants the full effect and a finished engine bay when the hood is raised.

Four-Piece Construction

Each side pairs a top vent with a closely fitted lower duct assembly, so the kit looks factory with the hood open. The design fills the void between the fender liner and the top of the fender, which Verus says keeps rocks and debris out of the engine bay where some competing vents leave a gap. All four parts are 2×2 twill pre-preg carbon, autoclave cured under a high-gloss clear and shaped from scan data to the hood.

Features

Relieves high pressure trapped in the front wheel wells
Adds front downforce and improves cooling efficiency
Better lift-to-drag efficiency than closed fender wells
Fills the gap between fender liner and fender top
Pre-cut 3M VHB tape and cutting templates supplied

What’s Included

Carbon cooling fender vents, top (L/R)
Carbon cooling fender vents, bottom (L/R)
3M VHB double-sided tape, cut to shape (x4)
Cut templates (x3)

Applications

Toyota GR Supra: A90 | 2020-2026

Notes

Expect to cut the hood: three templates mark the openings, and the Verus manual and video walk through each step
The Fender Vent Kit for A90 is also sold in a top-only form as the Carbon Cooling Top Fender Vent Kit for A90 Toyota GR Supra
For heat leaving through the hood itself, Verus offers the Carbon Hood Louver Kit
See every Verus Engineering part for the A90 Toyota GR Supra
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Does the Fender Vent Kit for A90 require cutting? Yes. The Fender Vent Kit for A90 sits in openings cut into the hood above each front wheel, and Verus Engineering supplies three cutting templates so the openings match the vents. The carbon parts then bond in place with 3M VHB tape cut to shape, following the Verus install manual and video.
What is the difference between this kit and the top vents only kit? This kit includes upper and lower assemblies for both sides. Verus Engineering says the lower pieces finish the installation for hood-up appearance by covering the cut edges, and its four-piece design fills the void between the fender liner and the fender top. The top-only kit keeps the cooling and downforce function at a lower price, with cut edges visible.
Do fender vents add downforce on the Supra? Yes. Verus Engineering found that the Mk5 Supra traps airflow inside its front fender wells, building high pressure that causes front-end lift. Venting that pressure reduces lift and adds front downforce, and Verus says the vents also make the front splitter work harder on its suction side. Its CFD and on-track data agree closely on the result.
Can debris get into the engine bay through the vents? No, according to Verus Engineering. Some fender vent kits leave a void between the fender liner and the top of the fender, which lets rocks and road debris reach the engine bay. The Verus four-piece design fills that void, so the vents release wheel well pressure without opening a path for stones into the bay.
What are the Verus fender vents made from? All four pieces are 2×2 twill pre-preg carbon fiber, autoclave cured and finished in an automotive high-gloss clear. Verus Engineering shaped them from scan data of the Mk5 Supra so they follow the contours of the hood with an OEM-plus fit, and the kit includes 3M VHB double-sided tape cut to the shape of each part.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Carbon Cooling Fender Vent Kit for A90 Toyota GR Supra [A0600A]

Guaranteed Safe Checkout

Verus Engineering Carbon Cooling Fender Vent Kit for A90 Toyota GR Supra

Four-Piece Construction

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews