What rear brakes come in the MONO6 TA and MONO4r TA Brake Kit for Toyota GR Corolla?

Two Racing MONO4r TA calipers, the four-piston pipeless rear Endless lists for the car, on 332mm x 30mm three-piece E-slit rotors with RCP197 pads. Endless pairs them with the Racing MONO6 TA front calipers included in this Brake Kit for Toyota GR Corolla.

Does the Racing MONO4r TA rear set for the GR Corolla save money over separate kits?

Yes. Endless prices the set below the Racing MONO6 TA front kit and the MONO4r TA rear kit added together, and it arrives as one order with matched brackets and lines, so the whole car is converted to TA calipers in a single job.

Does the parking brake still work on the Racing MONO4r TA rear set for the GR Corolla?

The factory parking brake stays. Endless three-piece rear rotors retain it, and this kit runs 332mm x 30mm three-piece rotors at the rear, so the GR Corolla keeps a working parking brake after the upgrade. Endless two-piece rear rotors are the ones that do not retain it.

Which compound should I run?

Endless Japan lists SR01, MX72 and MX72 PLUS compounds for its TA calipers and supplies MX72 when none is chosen. Tell us how the car is used, from fast road driving to full circuit days, and we will suggest compounds for the RCP121 front and RCP197 rear pads.

How should the Racing MONO4r TA rear set for the GR Corolla be bedded in?

Endless specifies raising the rotors to around 400 to 500 degrees C without hard stops, then letting them cool naturally to below 100 degrees C. Bed the pads on a dry day, as Endless notes that bedding in the rain can keep them from full performance.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Endless Racing MONO6 TA / Racing MONO4r TA Front and Rear Big Brake Kit for Toyota GR Corolla with 332mm Rear Rotors

Endless’s Racing MONO6 TA / Racing MONO4r TA Front and Rear Big Brake Kit for Toyota GR Corolla gives the rear of the car four-piston pipeless MONO4r TA calipers, the rear-only TA design Endless pairs with its Racing MONO6 TA front. Each 2,100g forged monobloc rear caliper has stainless pistons and a 3D-cut surface, and clamps 332mm x 30mm three-piece E-slit rotors on Tufram-coated bells with the RCP197 pad. With matching TA construction at the front on 370mm rotors, the car gets the same caliper design and rotor type at all four corners, in one order.

Features

Racing MONO4r TA forged monobloc rear caliper, 2,100g
332mm x 30mm three-piece E-slit rear rotors
RCP197 rear pad shape
Racing MONO6 TA front calipers on 370mm rotors
Pipeless construction at all four corners
One order covering both axles

Specifications

Front caliper: Endless Racing MONO6 TA, six-piston forged monobloc, pipeless
Front caliper weight: 2,880g (Endless USA; Endless Japan lists 3,015g)
Front rotors: 370mm x 34mm, two-piece
Rear caliper: Endless Racing MONO4r TA, four-piston forged monobloc, pipeless
Rear caliper weight: 2,100g
Rear rotors: 332mm x 30mm, three-piece
Pad shapes: RCP121 front, RCP197 rear
Minimum wheel size: 18 inch front, per Endless

What’s Included

Endless Racing MONO6 TA front calipers (2)
Endless Racing MONO4r TA rear calipers (2)
Front and rear Endless brake pad sets
Caliper mounting brackets, front and rear
Front rotors (2), 370mm x 34mm two-piece
Rear rotors (2), 332mm x 30mm three-piece
Brake lines (4)

Applications

Toyota GR Corolla: GZEA14H | 2022-present

Notes

Front and rear set. Same parts as the listing led by the 370mm front rotors
The three-piece rear rotors in this Brake Kit for Toyota GR Corolla retain the factory parking brake
Replace E-slit rotors when the E marks on the face have worn away
Endless gives a 15 inch minimum wheel for the MONO4r TA rear
Endless Japan supplies MX72 pads with its TA calipers unless SR01 or MX72 PLUS is chosen
Made to order in Japan; bleed with DOT4 or higher fluid

Frequently Asked Questions

What rear brakes come in the MONO6 TA and MONO4r TA Brake Kit for Toyota GR Corolla? Two Racing MONO4r TA calipers, the four-piston pipeless rear Endless lists for the car, on 332mm x 30mm three-piece E-slit rotors with RCP197 pads. Endless pairs them with the Racing MONO6 TA front calipers included in this Brake Kit for Toyota GR Corolla.
Does the Racing MONO4r TA rear set for the GR Corolla save money over separate kits? Yes. Endless prices the set below the Racing MONO6 TA front kit and the MONO4r TA rear kit added together, and it arrives as one order with matched brackets and lines, so the whole car is converted to TA calipers in a single job.
Does the parking brake still work on the Racing MONO4r TA rear set for the GR Corolla? The factory parking brake stays. Endless three-piece rear rotors retain it, and this kit runs 332mm x 30mm three-piece rotors at the rear, so the GR Corolla keeps a working parking brake after the upgrade. Endless two-piece rear rotors are the ones that do not retain it.
Which compound should I run? Endless Japan lists SR01, MX72 and MX72 PLUS compounds for its TA calipers and supplies MX72 when none is chosen. Tell us how the car is used, from fast road driving to full circuit days, and we will suggest compounds for the RCP121 front and RCP197 rear pads.
How should the Racing MONO4r TA rear set for the GR Corolla be bedded in? Endless specifies raising the rotors to around 400 to 500 degrees C without hard stops, then letting them cool naturally to below 100 degrees C. Bed the pads on a dry day, as Endless notes that bedding in the rain can keep them from full performance.

About Endless

Endless was founded in 1986, when Isao Hanazato began developing brake pads out of his own racing experience, and the company builds its friction material, rotors, calipers and brake fluid in Saku City, Nagano. It has run its own team since 1991, in the All Japan F3 Championship and the Mirage Cup, and by 2017 had supplied brake fluid to Formula 1 for fifteen consecutive years. The pads supplied in each kit are Endless compounds, so caliper and friction material come from the same company.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Endless Racing MONO6 TA / Racing MONO4r TA Front and Rear Big Brake Kit for Toyota GR Corolla with 332mm Rear Rotors [1933477-332]

Guaranteed Safe Checkout

Endless Racing MONO6 TA / Racing MONO4r TA Front and Rear Big Brake Kit for Toyota GR Corolla with 332mm Rear Rotors

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Endless

Reviews