What does the Racing MONO6r TA Big Brake Kit for R35 replace?

The factory rear brakes. It swaps the 380mm x 30mm rear rotors for 387mm x 34mm three-piece E-slit rotors and fits a six-piston pipeless Racing MONO6r TA caliper. It is the rear kit Endless pairs with the Racing MONO6 TA front on the GT-R.

Do the front and rear kits share pads?

Yes. Endless lists the RCP123 pad shape for both the Racing MONO6 TA front and the MONO6r TA rear on the R35, so the car runs one pad part number at all four corners. That simplifies spares for track days and lets you run the same compound front and rear.

Why is there no caliper weight listed?

Endless confirms the MONO6r TA in its R35 fitment data, with the rotor size, pad shape and part number, but it has not published a spec page with weight or dimensions for this rear body. We list only what Endless states rather than estimate it.

Does the Racing MONO6r TA kit for the R35 GT-R keep the parking brake?

The factory parking brake stays. Endless three-piece rear rotors retain it, and this kit runs 387mm x 34mm three-piece rotors at the rear, so the R35 GT-R keeps a working parking brake after the upgrade. Endless two-piece rear rotors are the ones that do not retain it.

What comes with the Endless MONO6r TA rear kit?

Two Racing MONO6r TA calipers, RCP123 Endless pads, mounting brackets, two 387mm x 34mm three-piece E-slit rotors and two brake lines. Endless needs the hub bolt size, M12 or M14, when you order this Big Brake Kit for R35, and DOT4 or higher fluid is required for the bleed.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Endless Racing MONO6r TA Rear Big Brake Kit for R35 Nissan GT-R

Endless’s Racing MONO6r TA Rear Big Brake Kit for R35 Nissan GT-R gives the back of the car a six-piston pipeless caliper to match the Racing MONO6 TA front. It replaces the factory 380mm x 30mm rear rotors with 387mm x 34mm three-piece E-slit rotors, adding diameter and, more usefully, 4mm of thickness for heat. Endless lists it on its R35 fitment sheet with the same RCP123 pad shape the GT-R uses up front, which keeps one pad part number for the whole car. Endless does not publish a separate spec page for the MONO6r TA body, so we list only what its fitment data states.

Features

Racing MONO6r TA six-piston pipeless rear caliper
387mm x 34mm three-piece E-slit rotors
4mm thicker than the factory 380mm x 30mm rear rotor
RCP123 pad, the same shape as the R35 front kits
Rear partner to the Racing MONO6 TA front
Tufram-coated rotor bells

What’s Included

Endless Racing MONO6r TA calipers (2)
Endless brake pad set
Caliper mounting brackets (2)
Rotors (2), 387mm x 34mm three-piece
Brake lines (2)

Applications

Nissan GT-R: R35 | 2009-2025

Notes

Rear axle only. The front and rear set with the Racing MONO6 TA is listed separately
Endless needs the hub bolt size, M12 or M14, when the order is placed
Endless does not publish weight or dimensions for the MONO6r TA body; the specification here is limited to its fitment data
The three-piece rear rotors retain the factory parking brake
The caliper image shows the front MONO6 TA, the closest Endless photograph of the TA design
Made to order in Japan. Use DOT4 or higher fluid with this Big Brake Kit for R35

Frequently Asked Questions

What does the Racing MONO6r TA Big Brake Kit for R35 replace? The factory rear brakes. It swaps the 380mm x 30mm rear rotors for 387mm x 34mm three-piece E-slit rotors and fits a six-piston pipeless Racing MONO6r TA caliper. It is the rear kit Endless pairs with the Racing MONO6 TA front on the GT-R.
Do the front and rear kits share pads? Yes. Endless lists the RCP123 pad shape for both the Racing MONO6 TA front and the MONO6r TA rear on the R35, so the car runs one pad part number at all four corners. That simplifies spares for track days and lets you run the same compound front and rear.
Why is there no caliper weight listed? Endless confirms the MONO6r TA in its R35 fitment data, with the rotor size, pad shape and part number, but it has not published a spec page with weight or dimensions for this rear body. We list only what Endless states rather than estimate it.
Does the Racing MONO6r TA kit for the R35 GT-R keep the parking brake? The factory parking brake stays. Endless three-piece rear rotors retain it, and this kit runs 387mm x 34mm three-piece rotors at the rear, so the R35 GT-R keeps a working parking brake after the upgrade. Endless two-piece rear rotors are the ones that do not retain it.
What comes with the Endless MONO6r TA rear kit? Two Racing MONO6r TA calipers, RCP123 Endless pads, mounting brackets, two 387mm x 34mm three-piece E-slit rotors and two brake lines. Endless needs the hub bolt size, M12 or M14, when you order this Big Brake Kit for R35, and DOT4 or higher fluid is required for the bleed.

About Endless

Endless was founded in 1986, when Isao Hanazato began developing brake pads out of his own racing experience, and the company builds its friction material, rotors, calipers and brake fluid in Saku City, Nagano. It has run its own team since 1991, in the All Japan F3 Championship and the Mirage Cup, and by 2017 had supplied brake fluid to Formula 1 for fifteen consecutive years. The pads supplied in each kit are Endless compounds, so caliper and friction material come from the same company.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.