How long will the MONO6 Sports TA Big Brake Kit for RZ34 be available?

Only while stock lasts. Endless Japan has announced the end of MONO6 Sports TA production and will sell the remaining caliper bodies until they run out. If this Big Brake Kit for RZ34 is the one you want, order it now, because it may not be possible to source it later.

What does Cut Logo type mean?

Endless lists this front and rear set as the Cut Logo type on its US price sheet. It does not publish further detail on the designation, so ask us before ordering and we will confirm the exact finish with Endless rather than describe something we have not verified.

Do the front and rear calipers use the same pads?

No. The MONO6 Sports TA front takes the RCP180 pad shape and the Racing BIG4 rear takes RCP052. Endless offers both shapes in its street and track compounds, so the two axles can still run matching compounds even though the part numbers differ.

Will 17 inch wheels clear the calipers?

Endless gives 17 inch as the minimum for the MONO6 Sports TA and the BIG4, which is a floor rather than a promise. Spoke design and offset decide clearance, and Endless notes most factory wheels do not clear its kits, so we will check your wheel against the template.

What comes in the Endless MONO6 Sports TA and BIG4 set?

Two MONO6 Sports TA front calipers, two Racing BIG4 rear calipers, pads for both axles, mounting brackets, two 370mm front rotors, two 355mm three-piece rear rotors and four brake lines. Fluid is not included, and Endless specifies DOT4 or higher for the bleed on both axles.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Endless MONO6 Sports TA / Racing BIG4 Front and Rear Big Brake Kit for RZ34 Nissan Z with 370mm Front Rotors

Endless’s MONO6 Sports TA / Racing BIG4 Front and Rear Big Brake Kit for RZ34 Nissan Z pairs a forged monobloc front caliper with the two-piece BIG4 rear, and Endless lists this particular set as the Cut Logo type. The MONO6 Sports TA weighs 2,660g, carries its fluid inside the body with no crossover pipe, and clamps a 370mm x 34mm two-piece curving slit rotor. Endless Japan has ended MONO6 Sports TA production, so the set is offered only while caliper stock lasts.

Features

Forged monobloc MONO6 Sports TA front caliper, 2,660g
Pipeless front body with an internal fluid path
370mm x 34mm two-piece curving slit front rotors
Racing BIG4 forged two-piece rear caliper
355mm x 32mm three-piece rear rotors
Listed by Endless as the Cut Logo type

Specifications

Front caliper: Endless MONO6 Sports TA, six-piston forged monobloc, pipeless
Front caliper weight: 2,660g
Front piston sizes: 27mm x 2, 32mm x 2, 38mm x 2
Front rotors: 370mm x 34mm, two-piece
Rear caliper: Endless Racing BIG4, four-piston forged two-piece
Rear caliper weight: 3,486g
Rear piston sizes: 27mm x 2, 32mm x 2
Rear rotors: 355mm x 32mm, three-piece
Pad shapes: RCP180 front, RCP052 rear
Minimum wheel size: 17 inch front, per Endless

What’s Included

Endless MONO6 Sports TA front calipers (2)
Endless Racing BIG4 rear calipers (2)
Front and rear Endless brake pad sets
Caliper mounting brackets, front and rear
Front rotors (2), 370mm x 34mm two-piece
Rear rotors (2), 355mm x 32mm three-piece
Brake lines (4)

Applications

Nissan Z: RZ34 | 2023-present

Notes

Endless Japan has ended MONO6 Sports TA production. This Big Brake Kit for RZ34 is sold while caliper stock lasts and may not return
Same set as the listing that leads with the 355mm rear rotors
For the standard RZ34; the Z NISMO has its own Endless set
Endless gives 17 inch as the minimum wheel for both calipers; check spoke clearance against the template
The three-piece rear rotors retain the factory parking brake
Made to order in Japan; use DOT4 or higher fluid when bleeding

Frequently Asked Questions

How long will the MONO6 Sports TA Big Brake Kit for RZ34 be available? Only while stock lasts. Endless Japan has announced the end of MONO6 Sports TA production and will sell the remaining caliper bodies until they run out. If this Big Brake Kit for RZ34 is the one you want, order it now, because it may not be possible to source it later.
What does Cut Logo type mean? Endless lists this front and rear set as the Cut Logo type on its US price sheet. It does not publish further detail on the designation, so ask us before ordering and we will confirm the exact finish with Endless rather than describe something we have not verified.
Do the front and rear calipers use the same pads? No. The MONO6 Sports TA front takes the RCP180 pad shape and the Racing BIG4 rear takes RCP052. Endless offers both shapes in its street and track compounds, so the two axles can still run matching compounds even though the part numbers differ.
Will 17 inch wheels clear the calipers? Endless gives 17 inch as the minimum for the MONO6 Sports TA and the BIG4, which is a floor rather than a promise. Spoke design and offset decide clearance, and Endless notes most factory wheels do not clear its kits, so we will check your wheel against the template.
What comes in the Endless MONO6 Sports TA and BIG4 set? Two MONO6 Sports TA front calipers, two Racing BIG4 rear calipers, pads for both axles, mounting brackets, two 370mm front rotors, two 355mm three-piece rear rotors and four brake lines. Fluid is not included, and Endless specifies DOT4 or higher for the bleed on both axles.

About Endless

Endless was founded in 1986, when Isao Hanazato began developing brake pads out of his own racing experience, and the company builds its friction material, rotors, calipers and brake fluid in Saku City, Nagano. It has run its own team since 1991, in the All Japan F3 Championship and the Mirage Cup, and by 2017 had supplied brake fluid to Formula 1 for fifteen consecutive years. The pads supplied in each kit are Endless compounds, so caliper and friction material come from the same company.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Endless MONO6 Sports TA / Racing BIG4 Front and Rear Big Brake Kit for RZ34 Nissan Z with 370mm Front Rotors [1602921-370]

Guaranteed Safe Checkout

Endless MONO6 Sports TA / Racing BIG4 Front and Rear Big Brake Kit for RZ34 Nissan Z with 370mm Front Rotors

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Endless

Reviews